Wrenches Teng Tools

Set of 9 AF chrome vanadium steel hex keys. With ball point head on the long key end for 30° access. Supplied in folding plastic holder.

Set of 9 metric chrome vanadium steel hex keys. With ball point head on the long key end for 30° access. Supplied in folding plastic holder.

A 1/2" drive telescopic wheel wrench that extends from 14" (35cm) to 21" (55cm) making it ideal for keeping in the car and for extra power when removing wheel nuts. It is made from chrome vanadium ste more→el for added strength and higher torque when fully extended. This wrench comes supplied with a double ended impact socket with 17mm and 19mm to fit most car wheel nuts.

Spanner Size: 21, 22; Drive [inch]: 1/2; Telescopic arm length [mm]: 350-550; Work side (profile): Hexagon Socket, Rectangle; Drive side (profile): Inner rectangle; Shape: L Shape; Material: Chrome Va more→nadium Steel

This Teng 25Nm 1/4" drive torque wrench can be used for both tightening and the final checking of the torque. This device is reversible with a lever but only for right-hand action for torque checking. more→This torque wrench is equipped with an angular gauge for after tightening. It is graduated in Nm and ft/lbs, has a lockable setting and an accuracy of +/-4%. Manufactured according to DIN3122 standards and comes with a satin finish.

3/8in Square Drive torque wrench with flip reverse ratchet action and Nm and ft.lb reference scales. Manufactured to conform to BS 6703/88. The unique angular gauge for use after tightening stretch more→bolts allows bolts to be tightened over and above a pre-set torque rating by so many degrees e.g. 45°. Both the torque and angular gauge can be set with the one tool.Also suitable for 1/4 in square drive sockets if used in conjunction with 3/8 female/ 1/4 male adaptor (380035). Supplied in a robust oil resistant case.Range 5 to 25 Nm / 4 to 18 ft.lbPTDTEN3892AGE1

This Teng 110Nm 3/8" drive torque wrench can be used for both tightening and final checking of the torque. This wrench is reversible with a lever but only for right hand action for torque checking. It more→'s equipped with an angular gauge for after tightening. The wrench is graduated in Nm and ft/lbs, has a lockable setting and an accuracy of +/-4%. Manufactured according to DIN3122 standards and comes with a satin finish.

Square Drive Tang Size [mm (inch)]: 12.5 (1/2"); Work side (profile): Rectangle; DIN/ISO: DIN 3122; Tripping accuracy ± [%]: 4; Surface: Satined Matt; Rotation Direction: Can be used in clockwise and more→anticlockwise direction; Tool handle surface: Rubberized; Tool handle type: Non-slip Handle; Tools: with ratchet function; Tightening torque from [Nm]: 40; Tightening torque to [Nm]: 200; Scale Divisions [Nm]: 1; Length [mm]: 465; Width [mm]: 49.6; Height: 33.8; Weight [g]: 1340

This Teng 210Nm 1/2" drive torque wrench can be used for both tightening and final checking of the torque. This wrench is reversible with a lever but only for right hand action for torque checking. It more→'s equipped with an angular gauge for after tightening. It is graduated in Nm and ft/lbs, has a lockable setting and an accuracy of +/-4%. Manufactured according to DIN3122 standards and comes with a satin finish.

This Teng 350Nm 1/2" drive torque wrench can be used for both tightening and final checking of torque. This wrench is reversible with a lever but only for right hand action for torque checking. It's e more→quipped with an angular gauge for after tightening. It is graduated in Nm and ft/lbs, has a lockable setting and an accuracy of +/-4%. Manufactured according to DIN3122 standards and comes with a satin finish.

22 piece set consisting of a 3/8” drive torque wrench, 10 crow foot wrenches, bit adaptor, 8 TX bits, 3” and 5” extension bars. Supplied in the unique Teng Tools TC tray for use on i more→t’s own or as part of the Teng Tools TC control system.