Tap Hidden Parts Monument

Monument Flat Tap Reseater Cutter to fit models 450 455 454 458 and 460 Tap Reseating Tools.1 x Monument 501X Spare Flat Tap Reseater Cutter 16mm (5/8in)PTDMON501

Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 & BS1010 1/2in and 3/4in taps. Complete with: 17 19 and 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes. Made in Britain.PTDMON450

Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 & BS1010 1/2in and 3/4in taps. Complete with: 17, 19 and 25mm...

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body provided the tap body is threaded to the top. For taps with recessed threads in the body use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.PTDMON458

Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into...

Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body provided the tap body is threaded to the top. For taps with recessed threads in the body use the parallel bush series.Cutters are case hardened. The feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits old series 1/2in and 3/4in BS1010 flat seats. Complete with 17 19 20 and 25mm (11/16in 3/4in 13/16in 1in) flat cutters and 2 tapered cones.PTDMON460

Monument 173 has been especially designed for removing stiff backnuts from awkward placed taps and to make tap installation a more rapid process this tool is for 1/2-inch. BSP and 3/4-inch. BSP taps. The Monument 170 tool stays in position on the tap tail so can be used with one hand and uses mechanical advantage of the thread of the tap tail to remove stiff nuts. Ideal for 1/2-inch and 3/4-inch BSP 25 mm 27 mm nuts 29 mm ribbed 32 mm nuts. The MON173 is complete with 3/8-inch cordless drill adaptor 1/2-inch square drive extension tube and full user instructions. For removing stiff backnuts and rapid tap installation for 1/2-inCH. BSP and 3/4-inch. BSP Taps.Tool stays in position on the …