Bike Fenders Mission

A quality long straddle cable with lugs on both ends. Works with most modern 990 style brakes.

Straddle cable hanger by Mission in a traditional bolt style design.

Replacement nylon sleeve for the Mission Targa Peg. Please note: The Mission Targa Peg Sleeve is sold individually! ###section### Product Specs LENGTH: DIAMETER: MATERIAL: Plastic AXLE SIZE: PACK SIZE: 1 (Single) WEIGHT:

Freshen up the mounting hardware on your spindle drive with a pair of Mission Spindle Bolts. Mainly built to replace worn or broken Mission Transit Cranks, though it will also work well with others.

Assorted bottom bracket spindle spacers for fine tuning crank arm offset, 2pcs x 0.6mm, 2pcs x 1.5mm, 2pcs x 3mm.

Mission Sprocket Adapter, adapts 23.8mm (15/16") to 19mm or 22mm spindles.

Mission brass BMX nipples. Less likely to strip out than alloy. Allows for increased ability to get higher tension on the spokes. These are the nice and long nipples.

Slides over a 3/8" axle or axle bolt, allowing a 3/8" axle to be used in a 14mm frame or fork dropout. Sold as a pair.

Straight brake cable featuring a 1.5mm pre stretched inner cable with tight-coil housing and steel cable ends. Available in multiple colors!

Clean and simple, this fork cap bolt fits most modern forks on the market. CNC machined from 6061-T6 aluminum, providing strong threads and allen key slot. This fork cap installs with a common 6mm allen wrench. M24*P1.5 thread, 15mm thread length, weighs 0.7oz.

The Mission Pinch BMX Crank Bolts are a replacement set bolts with an M7*P1.0 thread, fitting Mission cranks and many others. ###section### Product Specs Crank Type: Drive Type: Spindle Diameter: Drive Side: Includes BB Bearings: Weight: 13.9g (0.49oz) ###shogun-image-section###

No frills, affordable, durable, plain and simple. The Mission Strafe pegs are a perfect 4.5” length and include an adapter for use with 14mm or 3/8” axles. Please note: The Mission Strafe Peg is sold individually. ###section### Product Specs LENGTH: 4.5" (114mm) DIAMETER: 1.45" MATERIAL: Metal AXLE SIZE: 14mm with 3/8" adaptor PACK SIZE: 1 (Single) WEIGHT: 311.8g (11.0oz)

The Mission Tactile Grips take classic design, durable, proven rubber and created a super clean minimal style that works with anyones style. Constructed from fort Kraton rubber that's super grippy and durable, with a spiral ribbed pattern that feels soft while still providing tons of grip and just the right amount of support. Ultra durable expanding wedge style barends come included which are a much welcomed upgrade over traditional plug style barends. ###section### Product Specs DIAMETER: 30mm LENGTH: PACK SIZE: 2 (Pair)

Mission's Brake Pads are designed to upgrade those average quality stock brake pads. They're made from a soft and grippy clear rubber compound that works great on all type of rims, with a 60mm length giving them more stopping power than stock pads. They fit all 990 style brakes and easily install with a 5mm allen key.

Designed with front brakes in mind, this simple fork cap bolt features anadditional hole for routing a front brake cable. CNC machined from 6061-T6aluminum, providing strong threads and allen key slot. This fork cap installswith a common 6mm allen wrench

The Targa peg features a super sturdy steel core covered with a durable nylon sleeve, allowing for grinds on unwaxed ledges and aluminum rails! 14mm with 3/8" adapter included. Please note: The Mission Targa Peg is sold individually. ###section### Product Specs LENGTH: DIAMETER: MATERIAL: Metal peg/Plastic sleeve AXLE SIZE: 14mm with 3/8" adaptor PACK SIZE: 1 (Single) WEIGHT: 255g (8.99oz)

A pair of lightweight 17mm axle nuts. Available in 10mm and 14mm in various colors!

Made from super stiff forged aluminum. Features a 2 finger design lever for comfort and a hinged clamp for easy installation and removal. Available in multiple colors!

8 spline V3 19mm spindle from Mission with chromoly bolts.

The Mission 8-spline Crank Spindle is a direct replacement for the Transit Cranks and most other 8-spline cranks. Its chromoly construction ensures that the spindle is built to last. It comes with two spindle bolts included. ###section### Product Specs Crank Type: Drive Type: Spindle Diameter: 19mm Drive Side: Includes BB Bearings: Weight: 261g (9.21oz) ###shogun-image-section###

Made from industry-standard diecast aluminum, featuring extra-wide brake arm bends for large tire clearance and low-profile spring adjustment caps for universal functionality. Includes a simple one-piece straddle cable hanger system, brake pads, and all necessary hardware. The updated V2 design gives additional clearance, and the flat brake arm profiles eliminate any chance of brake arm rub.Specifications:- Type: 990 U-Brake- Height: 23mm Stack Height- Material: Die-Cast Aluminum- Includes: Brakes, Bolts, Pads, Straddle Cable- Weight: 5.9oz

Durability, performance and affordability. That's the Mission Impulse Pedal. Built from nylon composite with a knurled, concave body that offers superior grip and durability with 12 traction pins per side increasing that grip further. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; } ###section### Product Specs TYPE/FITS: 9/16 - 3pc MATERIAL: Plastic BEARINGS: Sealed PACK SIZE: 2 (Pair) WEIGHT: 13.6oz

A high-quality integrated headset at an affordable price! Includes two campy spec. sealed bearings and a 15mm tall dust cap for a seamless look.Specifications:- Type: Integrated- Bearing Type: Campy Spec- Bearing Size: 41.8mm X 45 Degree- Cap Height: 15mm- Weight: 2.8oz

Upgrade your standard 1 1/8″ headtube frame to an integrated style headset with the Mission Conversion headset. Uses stronger Campy type sealed bearings and includes dust cover cap, spacer, and steel fork bearing race. Specifications:- Headset Type: Standard 1 1/8´´- Bearing Type: 41.8mm x 45 Degree- Includes: Headset, Spacer, Star Nut, Fork Cap- Weight: 5.3oz