Tripods

[Built for Travel] The SLIK Sprint Series tripods are compact and lightweight, delivering rock solid performance in a travel ready package. [Multi-Function Center Column] The center column can be removed and reversed to position the the head between the legs instead of on top. This offers ground-level and top-down perspectives not possible in the traditional set-up. It can also be separated into 2 pieces so the tripod can achieve minimum height. Simply unscrew the two sections from one another in this tool-less design. An integrated, retractable hook sits at the bottom of the center column to hang your camera bag for increased stability on uneven terrain or windy conditions. [Fast …

【Solid Construction】Made of high-quality aluminum alloy and composed of large tube (18.6mm to 29.4mm tube diameter), the tripod possesses a large load capacity of 33lbs/15kg and corrosion resistance. In addition, with the interchangeable anti-skid rubber feet and stainless steel spikes, the tripod can stand firm on different terrains for indoor and outdoor shooting. The hook of center column can hang goods to increase stability. 【Adjustable and Extendable】Extendable center column and 4-section aluminum alloy legs with locking knobs allow you to adjust the working height from 9.1" to 68.9" in seconds, (while with a folded height of 20.9"). 3-position leg angle adjustment system can provide flexible…

The VESTA GO 264CB is a simple, lightweight and solid carbon fibre travel tripod kit that is designed for maximum portability and is suitable for almost all camera kits. Arca Swiss compatible ball head with locking knob and separate pan lock Folds down to 440mm and weighs just 1450g for maximum portability, with maximum load capacity of 10kg 4-section 26mm diameter legs with easy clean twist locks, extending to 1615mm (1365mm without central column) 3-easy set leg angles (20°, 50° and 80°) and split central column allows your camera to get down low Rubber feet

The VESTA GO 234CB is a simple, lightweight and compact carbon fibre travel tripod kit that is designed for maximum portability and is suitable for most mirrorless camera kits, or smaller DSLR kits. Arca Swiss compatible ball head with locking knob and separate pan lock Folds down to 405mm and weighs just 1150g for maximum portability, with maximum load capacity of 4.5kg 4-section 23mm diameter legs with easy clean twist locks, extending to 1495mm (1245mm without central column) 3-easy set leg angles (20°, 50° and 80°) and split central column allows your camera to get down low Rubber feet

The VESTA GO 234AB is a simple, lightweight and compact aluminium travel tripod kit that is designed for maximum portability and is suitable for most mirrorless camera kits, or smaller DSLR kits. Arca Swiss compatible ball head with locking knob and separate pan lock Folds down to 405mm and weighs just 1300g for maximum portability, with maximum load capacity of 4.5kg 4-section 23mm diameter legs with lever locks, extending to 1495mm (1245mm without central column) 3-easy set leg angles (20°, 50° and 80°) and split central column allows your camera to get down low Rubber feet

The VESTA GO 204CB is a simple, lightweight and compact carbon fibre travel tripod kit that is designed for maximum portability and is suitable for most mirrorless camera kits, or smaller DSLR kits. Arca Swiss compatible ball head with single locking knob Folds down to 385mm and weighs just 930g for maximum portability, with maximum load capacity of 3kg 4-section 20mm diameter legs with easy clean twist locks, extending to 1385mm (1135mm without central column) 3-easy set leg angles (21°, 50° and 80°) and split central column allows your camera to get down low Rubber feet

The VESTA GO 204AB is a simple, lightweight and compact aluminium travel tripod kit that is designed for maximum portability and is suitable for most mirrorless camera kits, or smaller DSLR kits. Arca Swiss compatible ball head with single locking knob Folds down to 385mm and weighs just 1130g for maximum portability, with maximum load capacity of 3kg 4-section 20mm diameter legs with lever locks, extending to 1385mm (1135mm without central column) 3-easy set leg angles (21°, 50° and 80°) and split central column allows your camera to get down low Rubber feet

Quick Switch Multi Vertical / horizontal / Reversible Centre Column: The centre column can be used in either vertical or horizontal mode giving huge perspective choice to the photographer. The column can also be reversed. The grooved columns also eliminate unwanted rotation. Adjustable Leg Angle: The legs fold out with stops in 3 positions down to just a few inches off floor level for ultra low level photography. Flip Locks: The tripod has rapid action flip lock levers for quick height setting and adjustment. The legs have a non-rotating feature.

Fits any tripod with a 1/4" or 3/8" thread hole. Fits any accessory with 1/4" thread hole Folds to 6.6" and extends to 11.4". Weighs 0.65 pounds Maximum load capacity 6.6 pounds and gives you lots of acessory options Single, oversized locking knob for easy use. Serrated steel joint for solid grip Ball joints at both ends give you maximum flexibility. CNC-machined aircraft grade aluminium

Enables you to mount up to four cameras or camera accessories such as a flash unit to a single tripod Includes two VEO+ MA1 Multi-Mounts to attach/position extra gear, with a stopper on each end prevent kit from sliding off Ends have 3/8” threads that reverse to convert to 1/4” threads Fits onto any tripod with either a 3/8" thread or 1/4" thread (using adaptor provided) Maximum load capacity 10kg Extends 650mm and weighs 1025g Includes a luxury padded bag to stay safe on the go

Kit includes (1) VEO CP-65 Clamp, (1) VEO TSA DLX L Tripod Support Arm & (1) VEO SPH Smartphone Holder VEO CP-65 Clamp opens up to 2.6" with molded rubber grips to attach to a wide variety of surfaces. Clamp features three threaded holes (two 1/4" and one 3/8") available for attachments/support arms VEO TSA DLX L support arm has ball joints at both ends give you maximum flexibility. Made with CNC-machined aircraft grade aluminum Support arm folds to about 6.6" and extends to 11.4", and it weighs just over a half-pound VEO SPH Smartphone Holder fits devices between 2.4" and 3.5" wide, and its cold shoe mount lets you neatly attach a microphone, wireless receiver, or other accessory

CNC machined solid aluminium accessories to form a versatile kit for photographers or smartphonographers VEO CP-46 Clamp that can attach to almost any object up to a 46mm diameter, and includes three threads to attach tripod support arms (weighs 130g | max load capacity 3kg) VEO TSA DLX M Tripod Support Arm with serrated steel elbow joint and a ball joint at each end, that locks using the single clamp lock (weighs 217g | max load capacity 3kg | folds to 113mm | extends to 180mm) VEO SPH Smartphone Holder that can fit onto any monopod/tripod/head and hold a smartphone up to 90mm wide, with a ball joint for maximum control (weighs 180g) Perfect for using your smartphone to capture behind the …

4-section 30mm diameter aluminium legs that weigh 1.8kg with a 20kg load capacity Extends to 166cm (140cm with central column down) and folds to 52cm Innovative hexagonal central column with built in low angle adaptor Three easy set leg angles with easy clean twist lock leg adjustments Retractable rubber/spiked feet with luxury padded tripod bag

4-section 30mm diameter carbon fibre legs that weigh 1.5kg with a 20kg load capacity Extends to 166cm (140cm with central column down) and folds to 52cm Innovative hexagonal central column with built in low angle adaptor Three easy set leg angles with easy clean twist lock leg adjustments Retractable rubber/spiked feet with luxury padded tripod bag

Classic design elements meet leading-edge engineering. Folds down and then out again quickly for maximum portability Converts to a monopod in three easy steps. Canopy is built tough from a block of aircraft-grade aluminum and features a bubble level and two additional 3/8” threads to add more accessories Arca-compatible VEO 2 BP-120T ball head with removable panhandle and Quick Shoe with a built-in universal smartphone connector Includes Bluetooth remote, spiked feet, low-angle adapter, premium tripod bag, Allen keys, and 3/8” to ¼” adapter Folded length: 17.3" Extended height: 65.4" Weight: 4.2 pounds Max. load: 26.4 pounds

Travel-style aluminum tripod with reversible legs for easy, compact folding . 3 easy-set leg angles – move from full height to low angles in seconds Multi-angle central column (MACC) offers a variety of setup options. One leg converts to a monopod in 3 easy steps Easy-clean twist leg locks can be removed to clean out sand and other debris, extending the life of your tripod legs with regular maintenance Canopy includes a reversible 3/8” to ¼” thread. 3/8” thread hole on side of canopy to add another accessory Folded height: 18.9" Extended height: 57.1" Weight: 3.9 pounds. Max load: 33 pounds

Multi-Angle Central Column moves 360° in any direction 3 easy-set leg angles Rapid Set, Easy Clean Twist Locks Central column converts to a Multi-Mount using the VEO+ MA1 (included) Converts to a monopod up to 1.5m tall Reversible 1/4" to 3/8" thread so it can be used with any tripod head 3/8” thread hole on side of canopy Folds to 48cm for maximum portability Extends to 145cm Weighs 1965g

Classic design elements meet leading-edge engineering. Folds down and then out again quickly for maximum portability Converts to a monopod in three easy steps. Canopy is built tough from a block of aircraft-grade aluminum and features a bubble level and two additional 3/8” threads to add more accessories Arca-compatible VEO 2 BP-50T ball head with removable panhandle and Quick Shoe with a built-in universal smartphone connector Includes Bluetooth remote, spiked feet, low-angle adapter, premium tripod bag, Allen keys, and 3/8” to ¼” adapter Folded length: 16.1" Extended height: 61" Weight: 3.5 pounds Max. load: 17.6 pounds

Travel-style aluminum tripod with reversible legs for easy, compact folding . 3 easy-set leg angles – move from full height to low angles in seconds Multi-angle central column (MACC) offers a variety of setup options. One leg converts to a monopod in 3 easy steps Easy-clean twist leg locks can be removed to clean out sand and other debris, extending the life of your tripod legs with regular maintenance Canopy includes a reversible 3/8” to ¼” thread. 3/8” thread hole on side of canopy to add another accessory Folded height: 18.1" Extended height: 53.4" Weight: 3.4 pounds. Max load: 22 pounds

Veo 3T+ 234APS is an innovative compact aluminum tripod with 4 sections and 2 and 3 way CNC panoramic ball joint Veo PH-36S for photography and video. Thanks to the multi-angle center column (MACC) allows you to achieve almost any angle in seconds and with the included adapter, you get a multi-stand system in a single tripod. Includes the 2 and 3 way ball joint VEO 2 PH-36S, compatible with Arca and the first panoramic ball joint made 100% CNC. In addition to traditional use, it allows the photographer to rotate the upper grip in 90° segments for perfect panoramas. For those moments when you don't need the full tripod, just remove the marked leg and center column, and screw the two joints t…

Classic design elements meet leading-edge engineering. Folds down and then out again quickly for maximum portability Converts to a monopod in three easy steps. Canopy is built tough from a block of aircraft-grade aluminum and features a bubble level and two additional 3/8” threads to add more accessories Arca-compatible VEO 2 BP-45T ball head with removable panhandle and Quick Shoe with a built-in universal smartphone connector Includes Bluetooth remote, spiked feet, low-angle adapter, premium tripod bag, Allen keys, and 3/8” to ¼” adapter Folded length: 15.9" Extended height: 55.1" Weight: 3 pounds Max. load: 8.8 pounds

Improved, stronger leg design can hold heavy loads. CNC-machined for precision and durability Noise-free leg adjustments and silent, easy-clean leg locks, and low-angle adapter and 3 easy-set leg angles for macro/low-angle photography – or simply reverse/invert the center column Shoot from a max height of over 70 inches, all the way down to under 10 inches minimum height. Tripod leg converts to a monopod in 3 easy steps Includes a VEO BH-160S dual-axis ball head and QS-62v3 Quick Shoe plate (max load: 33 pounds). 360° panoramic movement with the dual-axis ball head provides tons of photo and video options New anti-drop system on the Arca-compatible Quick Shoe helps keep equipment safe. Tr…

Innovative Multi-Angle Central Column (MACC) system moves from 0- to 180-degree angles in variable vertical and horizontal positions Three adjustable leg angles: 23°, 50°, 80°. Grip and go with non-slip, all-weather grips on 2 legs. Convert one leg into a monopod for maximum flexibility Large quick-twist leg locks offer increased stability and smooth extension Removable hook can be used to hang weight for additional stability. Spiked feet, tripod bag, VEO+MA1 adaptor, and hex wrench included Tripod Specs: Folded height: 26.1". Extended height: 64.1". 3 section, 26mm aluminum legs. Weight: 4.4 pounds. Max load: 33 pounds

Multi angle central column - for almost 360° adjustment 3 easy to change, pre-set leg angles: 23°, 50° & 80° Perfect for any photography style: from macro to landscape photography Multi-mountable Monopod compatible