Tripods

Inverted 5 section carbon fiber legs that fold for compact carrying. The TPU grip leg converts easily into a monopod by detaching the top plate and ball head from the center column Rubberized twist leg locks-new open to click feature. Also, easy to clean disassemble and reassemble if needed. Shoot low by reversing the column or using the included low angle adapter Sturdy ball head T-50 with large ergonomic knobs, separate pan lock optimized to support working loads up to 13. 2 pounds. Arca compatible quick release plate - qs-64 Independent leg positioning at 3 different angles (21°, 50°, 80°) for greater adaptation to uneven terrain and to shoot more creative pictures. Round rubber feet con…

The ultimate balance between portability and performance Extends up to 166.5cm with a maximum load capacity of 10kg. Folds down to 41cm and weighs just 1.7kg Extends to 166.5cm with max load capacity of 10kg Ball head features an Arca Swiss compatible quick release system and separate pan-lock Three easy set leg angles, FREE spiked feet, FREE carry bag and FREE low angle adaptor Reversible central column

All in one – Tripod and bag Kit to go out and start shooting now! Great mobility – bag fits Mirrorless/CSC/Hybrid camera with lens attached, additional 2-3 lenses, or 2 lenses Plus flash, accessories, 9. 7” tablet, and the tripod inside! Super Compact – Tripod features Inverted 5 section aluminum legs that fold down to just 12. 75”. great usability - twist leg locks feature new ‘open to click’ feature that also makes it easy to clean disassemble and reassemble when needed Quick action – bag allows rapid access to camera gear via top zipper, while tripod set-up is super quick and intuitive. Protection & Security – bag secures and protects all gear while in transit and the secure head lock S…

Four section, 23mm aluminium leg with a maximum load capacity of 5kg Folds down to 620mm and weighs just 885g for maximum portability Strong, silent 1/2 turn twist leg locks for rapid and quiet deployment Tri-Feet easily fold and deploy in seconds Wide U-Yoke with rubber fins to secure your rifle

Includes a multi-action TBH-50 ball head with a large ergonomic main locking knob, bubble level and (No Suggestions) quick release plate 5 section 23mm aluminum alloy legs with 3 different leg angle options and feet that convert from rubber to spiked Extra low angle photography option (low angle adaptor included)

2-section aluminium legs and sliding centre column Maximum Extended Height: 41.7cm Maximum Loading Weight: 1.5kg Weight: 467g Includes 2-way pan and tilt head

Velbon Geo E440 Tripod Product type: CAMERA_TRIPOD Brand: ????

Manufacturer Model Number: End Hook (JAN: 4907990409744) Weight: 1.4 oz (40 g) Will not fit the "Ultra" series or "Ultrrek" series International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

The Yunteng VCT-288 monopod is equipped with a tripod for all photo and video situations. The tripod allows the monopod to be placed on a flat surface with the possibility of being completely fixed or by unscrewing the lower part to offer a rotation of the monopod. ✓ Removable: the tripod head allows the monopod to be rotated 360° and from front to back without having to move it. It offers an ideal balancing effect when you need to change angle or orientation quickly during shooting. ✓UNIVERSAL: The bi-directional ball head is equipped with a quick-release wide tray, a 1/4 inch thread and 2 angled ladders. The controller keeps movement fluid. ✓ SOLID: The independent 4-section monopod with qu…

✔Fit any smartphone from3.5"to 6.8" wide such ✔Cell Phone Tripod Adapter Holder Smartphone Universal Mount Adapter (black) ✔Screw directly to the tripod with pivoting arm, Made of high-grade plastic, not easy to damage! ✔Both the top bracket and bottom mount can fit tripod, monopod, selfie stick or other filming device with 1/4-20 connection. ✔Maximum weight: 1 kg Weight:69g Interface: International standard screws 1/4 Material : plastic Package included: 1 x Aoonar Tripod Adapter

Magnetic holder compatible with MagSafe | Designed for iPhone 12 and newer, but also suitable for magnetic smartphones and cases from other brands. Strong magnetic attachment | Install in no time at all and create stable and vibration-free images. 1/4" Tripod Mount | Universal 1/4" screw hole for easy mounting on a tripod or selfie stick. DURABLE PROTECTION | Protects against scratches with a non-slip silicone mat. Create stable recordings | Provides convenient support for stable shots.

FULL COMPATIBILITY: Holds smartphone with widths of 2.36" To 4.09" Universal tripod and lighting connections SAFETY FIRST: Double lock mechanism: spring lock and side lock VERSATILITY IN USE: two ¼ attachments: for landscape and portrait mode RELIABLE: Ergonomic Italian design, compact and lightweight

Durable Large Wheels - This tripod wheels 3986 is a camera dolly designed for mobile tripods and easy action photography. Equipped with a large and highly adaptive 3-inch rubber wheel, it can realize the stable movement of the tripod on a smooth ground and shoot a smooth tracking lens. Wheel has an independent brake that stops the wheels from swiveling as well as turning, keeping the dolly stably locked in place. Fits Most Tripods - You can line up each tripod foot firstly, and then twist the thumb screws to tighten the adjustable clamp. Tripod dolly clamp can extend to 54mm/2.12", suitable for tripod with leg diameter less than 54mm. Its max payload is 15 kg for optimal performance.

The Multi holder MM 2 from Bosch - best handling thanks to compact design Highest precision when aligning levelling devices near the floor and on the wall Suitable for all cross and line lasers from Bosch Also suitable for all electrical devices with a 1'4 inch tripod mount (e.g. cameras). Scope of delivery : 1 x working clamp MM2

UNIVERSAL: The rubber tripod feet spikes replacements fit all tripods and monopods with 1/4 inch thread mounting. ANTI-SLIP: Each tripod spike foot is made of silicone rubber, which has a stronger grip to prevent tripods and monopods slip and provide extra stability even if in uneven terrain. EASY TO INSTALL: It is practical and easy to use. No need to use extra tool, just simply screw it in and then use it on your tripod. MULTIPURPOSE: The tripod feet spike allows the tripod leg to dig deep into soft surfaces,and keep your tripod stable when you're shooting on softer looser ground such as snow, sand, etc. it is also suitable for outdoor and indoor use.

Complete set: the Ulanzi vlog set consists of a table stand, a phone holder with cold shoe holder and a directional microphone. Multifunctional: the tripod is suitable for a compact camera, a system camera, a DSLR camera, a smartphone and a GoPro. Can also be used as a handle Horizontal and vertical films. Use the sturdy metal phone holder to film both horizontally and vertically. Crystal clear sound Record crystal clear sound with the directional microphone SAIREN VM Q1. Connect directly to your camera or smartphone. No battery required. Easy to carry. The vlog kit comes in a sturdy storage case. Protects your set and is easy to carry.

With A Cold Shoe Mount --- ST-06 has its own cold shoe mount design, which allows fixing microphones, photographic lights and other equipment. 360° Adjustable，Landscape or Portrait Shooting --- ST-06 uses 360° rotation design to support shooting from various angles，including landscape and portrail shooting. Angle Adjustable, No need Ballhead --- The traditional smartphone tripod mount can not adjust the angle, but ST-06 adjustable angle design allows you to fix on the tripod or camera hot shoe mount and adjust the pitch angle without the ball head. Universal --- Mobile phone clip size is 60mm-100mm (2.36-3.94 inch), universal for most smartphones with or without a phone case, including iPhone…

【Ulanzi MA53 Metal Phone Tripod Mount】: Equipped with 360° rotation & 180° Tilt smartphone holder with cold shoe*2 and 1/4" Thread hole *5, 3/8" Thread hole *1, you can attach additional LED light, microphone or magic hand, enhancing your videos, streams, vlogs, and photography. It's an essential tool for YouTubers, Vloggers, and outdoor photographers. 【Easy Device Switching】Ulanzi MA53 comes with standard Arca-Swiss / Uka quick release plate port, Pefect compatible for Uka and Arca Swiss quick-release plates, ensuring effortless switching between your devices. The bottom of the MA53 has an Arri positioning hole to ensure stability and prevent deflection. In addition, 1/4"

Add your smartphone to the O-LOCK ecosystem of accessories when placing it into this O-LOCK Quick Release Phone Case for iPhone 13 Pro Max The back of the case features the O-LOCK connector that makes it compatible with a wide array of Ulanzi O-LOCK mounts The built-in magnet also makes the case MagSafe compatible for additional versatility Four-Corner Drop Protection

Selfie stick and tripod in one — Fold out the tripod to turn the selfie stick into a table tripod. Extendable extra long — The selfie stick tripod can be extended in five positions from a minimum of 32.5 to a maximum of 109 cm. Films vertically and horizontally — The notch in the tripod head allows filming from all angles: horizontal, vertical, up or down. With cold shoe mount - Mount a microphone or video light on the cold shoe mount. For smartphone and camera - The MT-44 has a phone holder that can be folded into a tripod plate with 1/4 inch screw to mount a camera.

4 Section legs with clips, 3-way pan head with quick shoes included This aluminum tripod achieves a maximum loading capacity of 4. 4lbs. 3-Way pan head and bubble level, carrying case included Geared center column for ease of use. Quick shoe for u-series included