Hi-Fi Racks & Mounts

AMM112 U Bracket The AMM112 U-bracket allows for versatile mounting of a single AMM112 loudspeaker with ample rotation to accommodate various pitch angles. The structural rigidity of the bracket allows either two-point attachment to flat surfaces such as walls or ceilings or single-point attachment via the center mounting hole to secondary support structures such as third-party lighting-pole mounting kits or truss. The bracket fits the M10 x 20 mm threaded inserts on the side of the AMM112 loudspeaker is shipped with required fasteners for attaching the U-Bracket to the loudspeaker and is not intended for permanent outdoor installation.

Bose 843364-0010 speaker mount Ceiling, Wall Black

Bose 843344-0010 speaker mount Ceiling

AMM Suspension Bracket The AMM Suspension Bracket is designed for use with Bose AMM108 or the Bose AMM112 loudspeaker. The Suspension Bracket is designed to provide single point suspension for the loudspeakers and mounts along the center of gravity so the loudspeaker hangs level. The bracket has multiple single-point suspension attachment points to allow incremental angle adjustment from 40 degrees (AMM108) or 35 degrees (AMM112) of downtilt and ranging to 30 degrees (AMM108) or 25 degrees (AMM112) of uptilt. The bracket fits the M10 threaded attachment points on the top of loudspeaker is shipped with required fasteners for attaching the bracket to the loudspeaker and is not designed for …

ArenaMatch AMUBRKT U-Bracket Kit The ArenaMatch AMUBRKT U-bracket allows for versatile mounting of a single ArenaMatch loudspeaker with full 360? rotation to accommodate any installed pitch angle. The structural rigidity of the bracket allows either two-point attachment to flat surfaces such as walls or ceilings or single- point attachment via the center mounting hole to secondary support structures such as third-party lighting-pole mounting kits. Bose ArenaMatch array rigging accessories are designed for use with ArenaMatch DeltaQ Array loudspeakers (AM10 AM20 and AM40) only. All accessory kits are shipped in pairs and includes all required fasteners.

Use the ShowMatch Array Frame (SMAF) to create overhead suspended arrays that contain subwoofer modules or to create ground stack arrays that use any combination of subwoofer modules mid/high modules or both.

Reducer flange for TV pin ø 28 mm for use on all common stands with tube diameter of 35 mm. The sleeve is simply put on and fixed with a clamping screw. For lighting crossbars and individual spotlights. Colour: Black Made in: Germany Length: 25 cm Material: Steel

Placement: Attaches to rectangular forklift support braces 1.5" to 2.5" wide Tilt: Yes - Clevis up to 90 fore / Yes - Clam Shells up to 160 Swivel: Motion Attachment - 360 / Entire arm - 360

Easily mount your Dell Dock-WD15 or Dell Thunderbolt Dock-TB15 behind most Dell UltraSharp or P-Series monitors or to a wall desk or any flat surface with the Dell Docking Station Mounting Kit. Help create a clutter-free work environment at your desk or workstation by mounting your Dell Dock-WD15 or Dell Thunderbolt Dock-TB15 behind your compatible monitor or under your desk. The kit comes with everything that you need to mount your Dell Dock-WD15 or Dell Thunderbolt Dock-TB15 behind a compatible Dell UltraSharp or P-Series monitor . The bracket easily attaches with four included mounting screws to the VESA mounting holes (100mm) underneath the monitor stand connector. Stand should be removed …

KIT

Table monitor stand. Features: The height adjustment is variable between 167 and 254 mm. 4 rubber pads each for floor and tray provide for stability and noise filtration. The recommended max. load is 15 kg. The support area (tray) dimensions are 150 x 170 mm. Material: steel. Colour: Grey. Height Adjustable: Yes Material: Steel Colour: Grey Package Quantity (pcs): 1 Package Contents: Manual;Isolation Pads Net Weight (kg): 3.41 Minimum Height: 167 mm Panel Surface: 214 mm x 214 mm Made in: Germany Load Capacity: 15 kg Maximum Height: 254 mm Original Colour by Producer: Grey

Elegant floor stand with large, flat cast-iron round base for near-field monitors and loudspeakers. The solid steel construction impresses with its stability and holds speakers and monitors securely in the desired position. The 205 x 245 mm support plate is simply screwed onto the 3/8" threaded connection. It can also be used to mount speakers and monitors directly, as well as mounting plates from Genelec and other manufacturers. For optimal listening height, 50 mm steps can be set between 950 and 1450 mm. The slim clamp with safety hook is easy and comfortable to use. A load capacity of 35 kg is possible when the load is centred. Four threaded spikes and four self-adhesive rubber studs are …

Steel stand for monitors with 3-leg base, stable and solid. Height adjustable (680 mm to 1140 mm) with a non-scratching locking screw and additional safety pin, internal cable routing possible. The dimensions of the base for the monitor are 245 x 205 mm, weight capacity is up to 35 kg, weight of the stand is 5,35 kg. Colour: Black. Minimum Height: 677 mm Package Quantity (pcs): 1 Made in: Germany Weight: 5,1 kg Maximum Height: 1132 mm Load Capacity: 35 kg Colour: Black Material: Steel Type: Stand

Separate weight plate to increase stability, for speaker stands with M20 base plate. The plate has a diameter of 325 mm and a thickness of 8 mm. There is an additional bore hole for a cable bushing. Self-adhesive rubber buffers ensure non-slip, low-noise operation. The weight is 5 kg. The weight plate can be mounted easily without any tools. Several plates can also be stacked onto each other. Compatible with: Stand Material: Steel Colour: Black Made in: Germany Diameter (mm): 325.0 Height (mm): 8.0 Weight: 4,9 kg

Steel tube combination for use with various base plates. With threaded bolt M20 for screwing in. Extension tube with diameter 35 mm to accommodate loudspeaker cabinets with flange socket. Height adjustable by means of a locking screw and safety bolt. The integrated threaded socket M10 allows the mounting of a crossbar or the direct attachment of spotlights. Maximum Height: 2400 mm Original Colour by Producer: Black Height (mm): 2400.0 Minimum Height: 1400 mm Diameter (mm): 35.0 Made in: Germany Weight: 3,7 kg Colour: Black Load Capacity: 18 kg Height Adjustable: Yes Material: Steel Compatible with: Stand

Robust and useful loudspeaker ceiling mount with 250 mm distance and internal cable management. The swivel area is +/-45 °. Within the parameters - the settings range from 0 to 45°. The clamping bracket is for loudspeakers with a vertical mounting template from 70 to 76.2 mm. For other attachment possibilities additional adapter brackets are available. A mounting bracket with side and central cable management makes mounting to the ceiling easier. Finish: White Original Colour by Producer: White Made in: Germany Colour: White

The practical wall and ceiling mount with 3/8" threaded connector has been upgraded. A new feature is a cable outlet, which now provides an internal cable guide for hidden installations. Thanks to two special threaded pins and the Allen wrench / hexagon key included in the delivery, the universal joint can be positioned and set exactly. As such the maximum load increases to 10 kg. The wall distance has been reduced to 160 mm. Specifications: Adjustment: swivel ball joint assembly. Angle of inclination: 0° to 90°. Type: black, with 3/8" threaded connector, without bearing plate. Material: steel. Max. load capacity: 10 kg. Mounting: attaches to walls and ceilings. Swivel: 360 º. Wall clearance: 160…

The practical wall and ceiling mount for smaller loudspeakers has been upgraded. A new feature is a cable outlet, which now provides an internal cable guide for hidden installations. Thanks to two special threaded pins and the Allen wrench / hexagon key included in the delivery, the universal joint can be positioned and set exactly. As such the maximum load increases to 10 kg. The wall distance has been reduced to 160 mm. Specifications: Adjustment: swivel ball joint assembly. Angle of inclination: 0° to 90°. Bearing plate: 95 x 80 mm. Material: steel. Max. load capacity: 10 kg. Mounting: attaches to walls and ceilings. Swivel: 360 º. Wall clearance: 160 mm. Wall plate: 95 x 95 mm. Weight: 0.6…

Speaker wall mount for speaker boxes with 36 mm flange mounting. This design largely conceals the wall mounting with the speaker box. Very strong and sturdy design, intended for a max. load of 35 kg. The speaker distance from the wall can be individually adjusted in 4 positions. Material: steel. Mounting bolt: diameter 35 mm x 85 mm. Wall-to-bolt clearance: 225/255/285/315 mm. Weight: 2,6 kg. Colour: Black. Made in: Germany

An easy-to-carry speaker stand made of high quality aluminum. 2-piece folding design. Fiberglass-reinforced fittings and an additional safety pin ensure stable support for the speakers. The height and feet adjust by an easy-to-use clamping lever. Material: aluminum. Height: from 1,270 to 1,930 mm. Max. load capacity: 50 kg. Tube end(s): diameter 35 mm. Weight: 2,34 kg. Colour: anodized aluminum. Adapter sleeve 21326 included. Made in: Germany Colour: Silver

Short steel tube for connecting satellite systems. Top with unique, patented expanding mandrel for a tight and backlash-free fit of the speaker. The plastic expansion jaws ensure a low-resonance connection between speaker and tube. Easy handling by means of clamping ring. Bottom with M20 threaded bolt for screwing into K&M mounting plate 24116. Height (mm): 245.0 Load Capacity: 35 kg Diameter (mm): 35.0 Weight: 0,63 kg Material: Steel

Steel adapter sleeve attaches to speaker stands with tubing diameter of 35 mm, mounts with a locking screw. Integrated unique patented expanding mandrel system which provides a tight and firm fit for the speaker. The moveable plastic splints separate the speaker from the stand creating a vibration-free connection. Ring Lock System. Material: steel. Height: 270 mm. Tube end(s): »Ring Lock« diameter 35 to 37 mm. Weight: 0,66 kg. Colour: Black. Made in: Germany

Unshakable and sturdy! This high quality, height adjustable distance rod is a guarantee for a secure, stable and quiet connection to satellite systems. The height is adjusted by an easy-to-use spring-loaded bolt and locking screw. The distance rod is connected to the subwoofer using the M20 threaded bolt. The unique patented expanding mandrel system provides a stable, tight and firm fit for satellite speakers. The movable plastic splints provide for a vibration-free connection between the rod and the speaker. Connecting the speaker is easy and is done using the handy ring lock - which is simply placed in position and screwed on. Minimum Height: 1100 mm Load Capacity: 35 kg Height Adjustable: …

Adapter for speaker-satellite systems. The short 250 mm adapter is perfectly suited as a single rod or as an extension rod. The adapter with a tube diameter of 35 mm has a M20 male threaded bolt on the one end and a M20 female thread on the other end. With the adapter the rod can be expanded to any length. Material: steel. Height: 250 mm. Weight: 0,61 kg. Colour: Black. Made in: Germany