Boilers Vaillant

The sensoROOM pure from Vaillant is available as a wired room thermostat and uses Vaillant’s eBUS communication protocol. Therefore, when installed with a Vaillant boiler, the control will take full advantage of enhanced load compensation to modulate and further improve the overall efficiency of the Vaillant heating system. This also provides easy compliance with boiler plus legislation.

VR92

The VR 92f is an additional wireless remote control required for multi-zoning with the sensoHOME RF and sensoCOMFORT RF.EBUS connection allows the boiler to modulate, ensuring peak performance and optimum efficiency for a Vaillant heating systemsensoCOMFORT comes with an outdoor sensor which provides an understanding of the thermal behaviour in and around the property and adjusts the flow temperatures to ensure optimal efficiencyInstalling a control has never been so easy, the sensoCOMFORT does an EBUS scan to automatically identify EBUS products to save time on installationThe touch interface provides a simplistic method of navigating the control to undertake simple tasksEffortlessly set heating …

The VR921 sensoNET internet gateway is to be used with the sensoHOME, sensoHOME RF, sensoCOMFORT, sensoCOMFORT RF and will enable app-based control of the heating system.The sensoAPP can be downloaded from the APP Store / the Android Store and then used to manage heating and hot water requirements on the go.

The Vaillant VR71 Wiring Centre enables the VRC700, to control up to a three zones when paired with the VR70, which ultimately enhances the system functionality.A controller controls and regulates the functions via an eBUS interfaceUses standard commercial lines for the wiringControl with the VRC700

The Vaillant VR70 wiring centre can be used to enable the your Vaillant multi-zone room thermostat to control a two zone system and up to three heating zones when used with two VR71 wiring centre's..Enhances system functionalityA controller controls and regulates the functions via an eBUS interfaceUses standard commercial lines for the wiringControl via your Vaillant multi-zone room thermostat

The VR66/2 control centre lies at the heart of the Vaillant Total System Solution, allowing eBUS controllers to be combined with room thermostats, valves, multi-zone heating and domestic hot water cylinder systems. The VR66/2 has two functional modes: Multi-zone mode or Mono-zone mode. Required to link the VRT 350F, VRC 470, VRC 470F or timeSWITCH 160 digital to a system or open vent boilerOnly compatible with the new range of ecoTEC boilers produced from March 2012 Multi-zone operation mode is compatible with the VRT 350 programmable room thermostat (only) and system, combi and open vent boilersMono-zone operation mode is compatible with the eBUS controller range and system or open vent boilers…

This Vaillant stainless steel facade/ plume wall support bracket is suitable for use with the Vaillant 80/125 facade/ plume system and is used low down the plume run to give a solid support to the wall. It would then be recommended to use the Vaillant Facade/ Plume fastening clamp every meter there after.50mm to 300mm adjustable..

This Vaillant stainless steel facade/ plume fastening clamp extension is suitable for use with the Vaillant stainless steel facade/ plume fastening clamp.90 to 280mm adjustable.

This Vaillant stainless steel facade/ plume fastening clamp is suitable for use with the Vaillant 80/125 facade/ plume system and is recommend that one is used every meter.50mm to 90mm adjustable.

This facade/ plume management kit (also known as a variable termination kit) resolves the issues caused by plume when a condensing boiler is running. Plume is the vapour trail produced when the flue gas temperature drops below a certain level. This simple piping fits neatly onto the horizontal flue, enabling the flue outlet to be re-sited away from the boiler.Compatible with facade/ plume accessories for Vaillant EcoTEC commercial boilers.

The Vaillant stainless steel 80/125 pair of 87º facade/ plume bend is suitable for use with Vaillant EcoTEC 80/125 flue systems in conjunction with the 80/125 facade/ plume kit.

The Vaillant stainless steel 80/125 500mm facade/ plume extension is suitable for use with Vaillant EcoTEC 80/125 flue systems in conjunction with the 80/125 facade/ plume kit.

The Vaillant stainless steel 80/125 pair of 45º facade/ plume bends is suitable for use with Vaillant EcoTEC 80/125 flue systems in conjunction with the 80/125 facade/ plume kit.

The Vaillant stainless steel 80/125 1 metre facade/ plume extension is suitable for use with Vaillant EcoTEC 80/125 flue systems in conjunction with the 80/125 facade/ plume kit.

The sensoCOMFORT from Vaillant is a smart control for multi-zone heating systems. It has been designed to be simple to install and use, and operates with Vaillant's eBUS protocol. This ensures all components of the system can easily communicate with each other to provide optimum system performance. It's perfect for multi-zone gas-fuelled systems, and hybrid or renewable installations.Installation of the sensoCOMFORT has been designed to be as easy as possible, with guided commissioning that detects the eBUS components of the system automatically and proposes pre-defined settings. So, the installer is no longer required to manually input information on each part of the system, simplifying commissioning …

The sensoCOMFORT from Vaillant is a control for multi-zone heating systems. It has been designed to be simple to install and use, and operates with Vaillant's eBUS protocol. This ensures all components of the system can easily communicate with each other to provide optimum system performance. It's perfect for multi-zone gas-fuelled systems, and hybrid or renewable installations.Installation of the sensoCOMFORT has been designed to be as easy as possible, with guided commissioning that detects the eBUS components of the system automatically and proposes pre-defined settings. So, the installer is no longer required to manually input information on each part of the system, simplifying commissioning …

These 100mm adjustable flue support clips from Vaillant are suitable for use on any 100mm flue system and is recommend that one clip is used every meter.

The Vaillant EcoFIT Pure rear piping spacing frame can be used to install a Vaillant EcoFIT Pure boiler between kitchen units. By creating some space between the boiler and the wall behind, it allows the pipework to be run down the rear of the boiler from above rather than through the worktop.

The Vaillant 80/125 vertical flue terminal is for use when installing a Vaillant EcoTec commercial boiler where the flue needs to be taken up and out through a flat or pitched roof. Flue extensions may need to be added between the boiler and the point at which the flue terminal is placed.

The Vaillant 80/125 sliding sleeve is ideal for carrying out flue run repairs or for joining a flue together in awkward-to-reach places. Compatible with Vaillant EcoTEC commercial boiler models.

This 80/125 horizontal flue kit for the Vaillant EcoTEC ErP rated commercial boiler models allows the gases created during the combustion process to be safely dispersed. As well as the flue pipe itself, the kit contains 90° boiler elbow and terminal.