Other Network Equipment D-Link

The DPE-101GI Gigabit PoE Injector is designed to supply a power and data connection to PoE devices such as an IP Camera or Wireless Access Point. The IEEE 802.3af compliant DPE-101GI gives you the ability to mount your PoE device virtually anywhere in a building such as on ceilings or near entryways by eliminating the need for a nearby power outlet and attached power supply. D-Links DPE-101GI combines electrical power with a Gigabit network connection and produces a Gigabit Power over Ethernet (PoE) signal allowing a single Ethernet cable to carry both data and power to a device.

Cost Efficient Flexibility Deploying the DPE-101GI saves both installation costs and equipment costs allowing …

IEEE 802.3 10BASE-T/802.3u 100BASE-TX/IEEE 802.3ab 1000BASE-T standards.
2 auto-sensing 10/100/1000Mbps ports.
Full/half duplex support with ANSI/IEEE 802.3 NWay auto-negotiation.
IEEE 802.3x Flow Control in full-duplex, back pressure in half-duplex.
10BASE-T/100BASE-TX: full/half duplex.

D-Link DPE-302GE 2-Port Gigabit PoE Extender

High-Speed Network Transmission for Business Environments:- The DEM-310GT is a high-performance 1310 nm single-mode SFP transceiver supporting full-duplex Gigabit speeds for distances of up to 10 km.The unit features a metal housing to reduce EMI and to increase durability.Hot Pluggable:- All D-Link transceivers are hot pluggable.You can connect a transceiver while the system is powered on without causing any issues, and easily swap one for another without having to reboot the switch each time.This permits modules to be added or removed without interrupting the network, facilitating maintenance and greatly reducing downtime.Multiple Applications:- Applications of the DEM-300 Series fiber transceivers …

D-Link´S New Line Of Gigabit Interface Converters (Gbics) And Small Form-Factor Pluggables (Sfps) Transceivers Represent An Industry Leading Combination Of Performance And Affordability.D-Link´S New Gigabit Transceivers Are Available In Two Form-Factors:Standard (Gbic) Or (Sfp)/Mini-Gbic.- The Dem-311gt Is A High Performance 850nm Multimode Sfp/Mini-Gbic Transceiver.Supporting Full Duplex, Gigabit Speeds On Multimode Fiber For Distances Of Up To 220m/550m On 62.5µm/50µm Fiber Respectively.The Unit Features A Metal Housing To Reduce Emi And To Increase Durability.Specifications:Performance:- Sfp Transceiver Type:Fiber Optic.- Maximum Data Transfer Rate:1000 Mbit/S.- Interface Type:Sfp.- Single-Mode Fibe…

The 10G Passive SFP+ Twinaxial Direct Attach Cable is designed to support connections1 for 10Gbps Gigabit Ethernet or Gigabit Ethernet switches with 10Gbps Gigabit Ethernet uplink, much more faster than SFP which only supports 2.5Gbps Gigabit Ethernet.With four cable models including the DEM-CB100S, DEM-CB300S, DEM-CB500S, and DEM-CB700S, this series is suitable for very short distances (up to 7 meters) and is ideal for highly cost-effective networking connectivity between switches and servers within a rack or in adjacent racks.Features:Ideal for High-Bandwidth Operations:- The D-Link 10G Passive SFP+ Twinaxial Direct Attach Cable supports speeds of up to 10Gbps, while having lower latency and …

A Refreshing Take on Network Management
The D-Link DNH-100 Wireless Controller is a centralized wireless LAN manager developed specifically for our Nuclias Connect management solution and is suitable for small to medium-sized business (SMB) IT infrastructure. It comes preloaded with Nuclias Connect network management software which is a key asset for businesses where IT skills are limited by financial or other constraints.

Tasks can be centralized and automated meaning the DNH-100 is highly suited for remote deployment where either dedicated onsite staff are unavailable or servers PCs and other devices that can run the software might not be viable.

Better-Than-Expected Performance at …

The Dpe-301Gs Poe Splitter Is Used With End Devices Such As Wireless Access Points Ip Cameras And Voip Phones That Dont Natively Support Poe But Rather Require Dc Power Input Of 5V 9V Or 12V. It Receives Poe Power On A Network Cable From A Poe Switch Or Midspan Injector And Splits The Ethernet And Dc Power Into Two Separate Cables. One Cable Provides The Dc Power And The Other Cable Provides The Ethernet Signal. Users Can Select From 5Vdc 9Vdc And 12Vdc Power For Their Device Using A Selectable Dip Switch On The Device.The Dpe-301Gs Poe Splitter Is Typically Located Near The End Device. It Has Two 10/100/1000 Rj-45 Ports. One Port Is For Poe In Which Is The Network Connection And Is Usually …

- Facilitates deployment of PoE devices where power outlets are not available
- Reduces installation and network equipment costs by eliminating the need for electrical wiring
- Provides power over existing network cabling to PoE devices such as access points IP cameras and IP phones
- Lightweight compact and easy to install
- Supports 802.3af / 802.3at
- 10/100/1000 interface provides flexibility for all types of connections

D-Links DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE) even when other devices in the network do not support it. With PoE technology low voltage DC power and Ethernet data signals are combined on …