Other network equipment

Axis 0878-002 network video recorder Black

- Reduced installation costs
- IEEE 802.3af compliance

Easier and faster installations

Power over Ethernet (PoE) offers an easy fast and cost-effective solution for supplying power to network video products without the need to install power outlets and electrical cabling.

No need for power outlets

With the use of Axis PoE products Axis network cameras and video encoders can receive both data and power over a single Ethernet cable. Network video products can thus be installed in areas where traditional power cabling and outlets are unavailable or difficult to install.

Axis PoE midspans and PoE splitters

Axis PoE midspans provide power (max. 15.4 W per port) over Ethernet cables …

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance a switch is normally used as a repeater or optical fiber may be used.

To overcome this distance limit network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable and forward the rest to the camera. Dependent on midspan and camera type the connection in total can be between 200-400 meters (656-1312 ft.).

Compatibility
AXIS T8129 PoE Extender is compatible with all Axis network video products supporting PoE and it is both IEEE 802.3af and IEEE 802.3at compliant. Check in the Set-up tab for information typical connections …

- Convert Ethernet to optical fiberN/A- Compatible with Axis network video productsN/A- Support for 10/100 MbpsN/A- Reliable configurationN/A- Two SFP slots and two RJ-45 portsN/AN/AFrom Ethernet to Optical fiberN/AN/AThe media converter switch can be connected in a daisy chain network. The maximum number of cameras that can be connected in the daisy chain depends on the generated bit rate per camera. The limitations are the 100 Mbit link between camera and media converter switch and the 1000 Mbit link between the media converter switches. AXIS T8604 does not feature IGMP Snooping.N/AN/AFor long distance connectionsN/AN/AFiber optic connections are typically used in city surveillance airports …

Slimline Soft-Open Full Service Video Wall Mount 42 - 75
Designed to make video wall installations as quick and simple as possible this modular video wall mount can be used to create unlimited video wall configurations in both landscape and portrait format. The BT8312 low profile design is ideal for mounting into walls with a shallow recess or when space in front of the wall is minimal. 8 points of micro-adjustment makes accurate screen alignment quick and easy and the soft opening features a controlled release enabling access to the rear of the mounted screen for servicing and maintenance.

• Slim design ideal for low profile installs on walls or mounting in recesses
• Modular …

Barco ClickShare CX-50 wireless presentation system HDMI Desktop

The UT-899216 is a 16 port 1U rack mountable CAT5e patch panel which is a great solution for network and cable management. The UT-899216 offers a clearly labelled neat and effective CAT5e pass through panel which is ideal for the heart of any small network.

- Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements.
- Support T568 A&B wiring & Easy installation.
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables.
- Compatible with 110 or Krone Tools.
- Backwards compatible with Category 3 & 5.
- All versions can be mounted in 19 Racks.

Cables Direct 16 Port Cat6 Patch Panel 1U

The UT-899224 is a 24 port 1U rack mountable CAT5e patch panel which is a great solution for network and cable management. The UT-899224 offers a clearly labelled, neat and effective CAT5e pass through panel which is ideal for the heart of any small network.

The UT-899248 is a 48 port 2U rack mountable CAT5e patch panel which is a great solution for network and cable management. The UT-899248 offers a clearly labelled neat and effective CAT5e pass through panel which is ideal for the heart of any small network.

- Meets the TIA/EIA-568-B.2 Category 5E Channel Testing Performance requirements.
- Support T568 A&B wiring & Easy installation.
- Dual IDC connector can accept 22-26 AWG solid and stranded UTP cables.
- Compatible with 110 or Krone Tools.
- Backwards compatible with Category 3 & 5.
- All versions can be mounted in 19 Racks.
- Supplied with a cable management bars

The UT-899548 is a 48 port 2U rack mountable CAT6 patch panel which is a great solution for network and cable management. The UT-899548 offers a clearly labelled, neat and effective CAT6 pass through panel which is ideal for the heart of any small network.

Cisco 4G-AE010-R Indoor cellular signal booster Grey

Cisco 4PT-KIT-T2= mounting kit Grey

The AIR-ACC1560-PMK1= mounting kit contains a mounting bracket for wall mounting or pole mounting the access point and the power supply together.N/AN/AYou can use the mounting bracket as a template to mark the positions of the mounting holes for your installation install the mounting bracket and then attach the access point to the bracket.

The CISCO 2.4 GHz 3 dBi/5 GHz 5 dBi Antenna in White is a high-performance antenna designed to boost the signal strength and range of your wireless network. This dual-band antenna can operate on both 2.4 GHz and 5 GHz frequencies, allowing for increased flexibility and improved connectivity.With a 3 dBi gain on the 2.4 GHz band and a 5 dBi gain on the 5 GHz band, this antenna provides strong and reliable signal reception for your devices. The sleek white design makes it a stylish addition to any home or office environment.Compatible with a wide range of CISCO networking equipment, this antenna is easy to install and can be adjusted for optimal positioning. Improve the performance of your wireless …

The Cisco Aironet AIR-ANT2524V4C-RS= Dual-Band Omnidirectional Wi-Fi Antenna is designed with improved performance in mind. It provides a 360-degree radiation pattern and is intended for deployment when coverage in all directions is required. This FCC-approved omnidirectional antenna includes circuitry to enable self-identification of the antenna by the Cisco Catalyst 9100 Access Points.

Cisco C9105AXW-KIT WLAN access point mount

Cisco Catalyst 9300 Series switches are Ciscos lead stackable enterprise access switching platform and as part of the Catalyst 9000 family are build to transform your network to handle a hybrid world where the workplace is anywhere endpoints could be anything and applications are hosted all over the place.N/AN/AThe Catalyst 9300 Series including the new Catalyst 9300X models continues to shape the future with continued innovation that helps you reimagine connections reinforce security and redefine the experience for your hybrid workforce big and small.

Cisco Catalyst PWR-CLP= Power Cable Retainer Clip, For Use with 3560-C, 2960-C, 3560-CX, 2960-CX, 2960-L and C1000 Network Switches, Enhanced Limited Lifetime Warranty (PWR-CLP=)

Cisco Secure Firewall: Firepower 1150 Security Appliance w/ ASA Software, 8-Gigabit Ethernet Ports, 2 SFP ports, 2SFP+ Ports, up to 7.5 Gbps Throughput, 90-Day Limited Warranty (FPR1150-ASA-K9)

The Narrow Patch antenna is ideal for high ceiling (25 ft+) aesthetic consensus installations in high density applications and where APs are covering high density users in small zones. Some example use cases are in large lecture halls/stadiums as well as event venue centers. This antenna supports Merakis smart antenna capabilities. The price shown is for a 5-connector model; the Narrow Patch antenna can be purchased with 5 or 6 connectors.

The Meraki MA-ANT-20 antenna is a multi-band omni-directional antenna designed for use with Meraki APs that have N-type connectors. It is a versatile antenna and is suitable for a broad range of applications. The MA-ANT-20 is sold in sets of 2.

Cisco Meraki MA-ANT-21 network antenna Sector antenna N-type 13 dBi

Designed for use with Cisco Meraki MR66 or MR72 2.4 GHz radios. The sector antenna can extend the range of a Cisco Meraki MR66 or MR72 device by focusing the wireless signal in a specific direction; the best way to establish a medium distance point-to-point wireless link.