Other network equipment

Cisco Meraki MA-MNT-MR-8 wireless access point accessory WLAN access point mount

This wall mounted kit is designed to be used in installations where additional cabling outlets are needed (e.g. telephone cabling) via the same wall plate used by an MR30H access point and where an aesthetically pleasing solution is needed. The kit contains the front and rear panels of the accessory two 12mm Philips head screws and a keystone jack port.

The Cisco Fourth-Generation 1- 2- 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC) voice-interface-card (VIC) ISDN Primary Rate Interface (PRI) dial-access integration and channelized-data (CE1T1) functions to provide unparalleled flexibility versatility and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco N2200-PAC-400W= network switch component Power supply

Rack mount for Cisco Catalyst 2960-8TC and Catalyst 2960G-8TC compact switches.

Cisco Sfp+ Copper Twinax (Figure 2) Direct-Attach Cables Are Suitable For Very Short Distances And Offer A Cost-Effective Way To Connect Within Racks And Across Adjacent Racks. Cisco Offers Passive Twinax Cables In Lengths Of 1 1.5 2 2.5 3 And 5 Meters And Active Twinax Cables In Lengths Of 7 And 10 Meters.

Used for connecting to StackWise ports on the rear panel of Catalyst 3750 switches. Cisco StackWise technology uses proprietary connectors and cables.

The DPE-101GI Power Over Ethernet (PoE) Injector is designed to supply a power and data connection to PoE devices such as an IP Camera or Wireless Access Point. The DPE-101GI gives you the ability to mount your PoE device virtually anywhere in a building, such as on ceilings or near entryways, by eliminating the need for a nearby power outlet and attached power supply. D-Link’s DPE-101GI combines electrical power with a Gigabit network connection and produces a Gigabit Power over Ethernet (PoE) signal, allowing a single Ethernet cable to carry both data and power to a device. Cost Efficient Flexibility Deploying the DPE-101GI saves both installation costs and equipment costs, allowing a…

D-Link DEM-311GT network transceiver module Fiber optic 1000 Mbit/s SFP 850 nm

A Refreshing Take on Network Management
The D-Link DNH-100 Wireless Controller is a centralized wireless LAN manager developed specifically for our Nuclias Connect management solution and is suitable for small to medium-sized business (SMB) IT infrastructure. It comes preloaded with Nuclias Connect network management software which is a key asset for businesses where IT skills are limited by financial or other constraints.

Tasks can be centralized and automated meaning the DNH-100 is highly suited for remote deployment where either dedicated onsite staff are unavailable or servers PCs and other devices that can run the software might not be viable.

Better-Than-Expected Performance at …

D-Link's DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs. The DPE-301GI device supports Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps through the RJ-45 interface. This …

Flexible architectural agility
Designed for architectural agility and flexibility to help data centers smoothly migrate to a software-designed data center.

devolo promise of success: Wi-Fi in 5 minutesN/APlug it in press the button start browsing! This is the devolo promise of success: Stronger Wi-Fi without any complicated setup.N/AN/AMaximum simplicity. Maximum strength.N/AA true power repeater for everyone who wants to boost their Wi-Fi quickly and easily and recognises the value of maximally equipped Wi-Fi 6.N/AN/AWi-Fi has never been easierN/AThis stylish Wi-Fi 6 turbo unit can be installed wherever it is needed and offers the best reception for smartphones tablets and laptops at your favourite spot be it your home office living room or kitchen. Moreover this top-of-the-line model of devolo repeater is equipped with WPS and is thus ready to …

An efficient solution to poor Wi-Fi signals: The devolo WiFi ac Repeater+ extends the limited router signal in no time. Browse at home with speeds up to 1200 Mbps and mesh Wi-Fi throughout your home that wont let you down even in your favourite reading corner. Very smart: Beamforming sends the Wi-Fi signal directly to your clients. In addition the crossband repeating function ensures an optimal bandwidth usage and faster data transmission on the 2.4 GHz and 5 GHz frequencies!

Also smart: With two Ethernet ports and an integrated power socket the devolo Repeater offers flexible connection options. Using this plug & play solution from the network pioneer you can get Wi-Fi with ease where you …

Digitus 10" Cable management panel

Digitus 254mm (10") Cable management with patchcord access hole

Digitus blind plate for modular patch panel

Digitus CAT 6A, Class EA Patch Panel, shielded

Digitus CAT 6A, Class E Patch Panel, shielded, black

Digitus CAT 6, Class E High Denisity Patch Panel, shielded, black

Digitus CAT 6, Class E High Density Patch Panel, unshielded

Digitus CAT 6, Class E Patch Panel

Digitus CAT 6, Class E Patch Panel

Digitus CAT 6, Class E Patch Panel