Grinders & Polishers

GMPK3 - 75mm (3") Mini Polisher Kit Compact and lightweight for ease of use in confined areas. Ergonomic and comfortable hand grip. Kit contents: mini polisher, backing pad, spanner, 90mm (3") fine polishing sponge (white), 90mm (3") coarse polishing sponge (yellow) and 90mm (3") lambs wool polishing bonnet. Backing pad: Hook & Loop. Minimum air hose size (ID): 3/8" (10mm).

MBS025-Xk - Mini Belt Sander Kit Suitable for shaping, paint removal, weld sanding, smoothing and rust removal on flat or curved surfaces. Supplied with 9 flexible abrasive belts and 5 contact arms. Rated for continuous use. Uses 6, 10, 13 and 20mm wide by 457mm long abrasive belts. Adjustable multi-positional sanding arm angle with a speed regulator and rear handle exhaust with noise baffler. Free speed: 18,000rpm. Air inlet thread: 1/4" NPT. Minimum air hose size (ID): 10mm (3/8"). Air consumption: 4cfm* (113ltr/min). Air pressure: 90psi/6.3bar. Motor power: 0.6hp. Noise Level: 84dBA Sound Power; 92dBA Vibration: 0.8m/s Overall length: 390mm. *Based on a 15 second cycle per minute average …

SBD370 Light enough to be semi-portable, yet its robust construction makes it ideal for workshop use. It has a disc sanding table suitable for finish sanding and curve sanding. The disc table also tilts to 45 degrees for bevel sanding and when used with the mitring guide is ideal for sanding compound angles. The sanding belt is ideal flat surface sanding but tilts up to 90 degrees for end sanding. Features and Benefits Can be directly connected to dust extraction (highly recommended) by way of the 61mm outlet port on the end of the sander. Cast Iron shelf. 4 x Anchor points for increased stability on work surfaces. Notes Power input: 370W. Sanding Disc: 150mm PSA (Stikit) Sanding Belt: 100 x …

Professional extended air die grinder with a higher specification offering user comfort and maximum durability - suitable for use on a wide range of applications requiring extra reach in hard to get at areas. The composite rubber body provides improved user grip and comfort over longer periods of use. Features and Benefits Designed for continuous use Extended spindle allowing two-handed operation Ball bearing construction for longer life and smoother running Safety release throttle prevents accidental start-ups Rear exhaust directs away from the workpiece Rotating air inlet to prevent the air hose tangling Reversible hardened steel collet Vibration dampened rubber body provides improved user …

Professional air die grinder with a high specification offering improved user comfort and maximum durability - This versatile air grinder is suitable for use with a wide range of abrasive stones and carbide burrs. With a compact design it is well suited to working in confined spaces Features and Benefits: Designed for continuous use 60mm short body Length allows better access to more confined areas Planetary gears for longer life and smoother running Low profile teasing throttle for precise speed control Rotating air inlet to prevent the air hose tangling Vibration dampened rubber body provides improved user grip and comfort over longer periods of use. Typical Application: For use on grinding,…

The 115 Head allows access into hard to reach areas. The composite rubber body provides improved user grip and comfort over longer periods of use. Features and Benefits: Designed and rated For continuous use Planetary gears for longer life and smoother running Safety release throttle prevents accidental start-ups Low profile teasing throttle for precise speed control Rotating air inlet to prevent the air hose tangling Vibration dampened rubber grip Rear exhaust directs away from the workpiece Typical Application: For use on grinding, polishing, buffing and deburring Ideal for cleaning, Smoothing welds seams and castings Maintenance applications Recommended Consumables Tungsten Carbide Burrs …

Professional 90 air angle die grinder - This versatile air grinder is suitable for use with a wide range of abrasive stones and carbide burrs. With a compact design it is well suited to working in confined spaces Features and Benefits: The 90 Head allows you to reach the more confined areas Trigger lock prevents accidental starting and increasing user safety Planetary gears offer longer life and smoother running The Low profile teasing throttle for precise speed control Typical Application: For use on grinding, polishing, buffing and deburring Ideal for cleaning, Smoothing welds seams and castings Maintenance applications Recommended Consumables Tungsten Carbide Burrs Mounted Points Flap Wheels …

BR0S3 - Composite Air Random Orbital Sander - 75mm With a high speed of 18,000rpm and an adjustable power regulator to match the speed to the job, the random orbital sander provides a smooth, swirl-free finish whilst the ergonomic hand grip offers enhanced user comfort. The compact, lightweight design makes it easy to use in confined areas and the exhaust directs air away from the operator. The sander uses 75mm (3") backing pads and has a ball bearing construction for a long tool life. Specifications: Backing pad: Hook & Loop. Minimum air hose size (ID): 3/8" (10mm).

This KWT-013 115mm Angle Grinder comes with 2 x 5.0Ah batteries. It also features a brushless motor, high performance electronics and variable speed functionality. Perfect for a wide range of grinding and cutting tasks. This angle grinder's robust design with all-metal gears and compact profile, aided by the 90º battery fitment, allows for comfortable grip and use, whilst also being durable and resiliant. As well as this, the Kielder grinder features a dual function switch, which can be operated as a trigger or with lock-on, plus adjustable guard and 2-position handle for even greater ease and range of use.

The Kielder KWT-013 Angle Grinder (Bare Unit) features a brushless motor for greater battery efficiency and longevity, as well as maintaining maximum power. Ideal for a wide range of grinding and cutting tasks, this robust tool is a great value addition to any toolkit, whether professional or DIY.

With continuous temperature and feed speed control. Ideal for mobile use in workshops, on construction sites, at trade fairs, etc. With digital temperature control and infinitely adjustable feed speed. For use with moulded parts and straight workpieces. Easy and fast tooling. Minimum inner radius of workpiece is 25 mm. The edges can be pre-glued for corner joints. With molten adhesive reservoir. Short warm-up time - very good heat insulation.

Max board thickness 102mm Minimum board thickness 0,8mm Minimum board length 60mm Max board width 559mm (1120mm)

Max board width (single) 560mm Max board width (two) 1,120mm Maximum board thickness 102mm Minimum board length 60mm

Sanding disc speed 1,400rpm Sanding belt speed 12m/s Sanding disc diameter 300mm Sanding belt dims 1501,220mm

18V Cordless Orbital Sander with 125mm diameter sanding pad that attaches via a hook and loop sanding base. The dust extraction facility and removable dust bag make for cleaner and safer working environment, as well as less mess to clean up after working. Suitable for a variety of sanding applications working with wood, metal and plastic. Further included is overload protection for even greater safety, an ergonomic design with rubber-grip overmould, for increased user comfort, sanding sheet to use out of the box and a dust bag.

Note: Image is for illustrative purposes only and may differ from the actual product

Petrol Stump GrinderThe HYSG150-2 is an extremely powerful stump grinder from Hyundai, powered by a 420 cc / 14hp 4 stroke Hyundai engine the HYSG150-2 is capable of removing the toughest and most awkward tree stumps efficiently, safely and increases productivity.Off Road TyresWeighing 110kg, the HYSG150-2 is easy to maneuver due to its large adjustable handle bars and heavy duty pneumatic tyres that keeps the machine elevated over wood chips during operation.Clear Tough Tree Stumps FasterBuilt to make tough tree stump clearing faster and less demanding the HYSG150-2 can remove any sized tree stump of any diameter that are up to 56cm high (above ground) down to 33cm below ground. Fitted with

Victor Hyperglide 350 Code: V-H9816 A counter rotating brush scrubber dryer that delivers excellent results in kitchen areas or small areas of safety flooring. The Victor HyperGlide is light in operation and responsive control means even an inexperienced operator can be cleaning effectively in minutes. Versatile - use on hard floors or carpets Effective drying performance Extremely light operation - highly portable 4ltr solution tank

The HTC Evolution Portable Dry Wall Sander is fitted with a powerful motor, variable speed and has been specially designed for drywall applications, works up to ten times faster than conventional methods. Fitted with an integrated dust extraction system, dust is removed via eight holes at the base of the sanding plate. All the dust is drawn via the power tool eliminating the need for an additional vacuum. The sanding disc is adjustable and the sanding plate is removable for easy use on any wall or irregular surface. Provides optimal suction power making sanding easier, reducing fatigue during work. It features a belt clip, allowing you to quickly attach a carrying strap, if required, ideal for …

G10SR4 - 100 mm Angle Grinders with Slide Switch Powerful 730W motor for medium duty commercial applications A Lockable slide switch on side for continuous use. Shaft lock button for easy wheel change and a two position side handle for easy operation and flexibility. Compact Lightweight design at 1.7kg & 197mm circumference for reduced user fatigue

Powerful, lightweight 240w 1/3 sheet sander suitable for multipurpose sanding use with a built in dust extraction facility and dust box for cleaner working. An ergonomic soft grip handle allows for comfortable extended use. Paper mounting via hook and loop or clamp for greater versatility and speed, while the dust sealed trigger with lock function allows for prolonged sanding use. Contains: dust box, dust tube, 10 piece sanding paper. Specification: Input power - 240w, no load speed - 0-11,000 per minute, orbit 1.6mm, paper mounting - hook and loop or clamp, base size - 90 x 187mm, volt/frequency - 230v-50hz.

A compact, lightweight 200w detail palm sander suitable for multipurpose sanding use with a built in dust extraction facility and dust box for clean working. An ergonomic soft grip handle allows for comfortable extended use. Also included is an easy to change hook and loop base to improve speed and convenience. The base is designed for intricate and tight areas, as well as large areas. Contains: dust box, dust tube, 10 pce sanding paper. Specification: input power - 200w, no load speed - 0-15000 rpm, paper mounting - hook and loop, sanding pad size - 140 x 140 x 80mm, volt/ frequency - 230v-50hz, cable length - 2m, orbital diameter - 1.6mm.

HEADLIGHT POLISHING KIT.

HD18 AG-402 115MM ANGLE GRINDER 18 VOLT 2 X 4.0AH LI-ION