Other for Computer Aqua

2.5M OM4 50/125 LC-LC DLX 2.8mm FIBRE OPTIC CABLE - AQUAMulti Mode. Duplex 50:125um. Fibre Class OM4 for Ethernet Networks up to 40 Gbit. Suitable for use in OM3 and OM4 applications Male to Male. Cable O.D. 2.8mm. Tested and Certified. Colour: Aqua Blue FDL 2.5M OM4 50/125 LC-LC DLX 2.8mm FIBRE OPTIC CABLE - AQUA

2M OM3 50/125 LC-SC DLX 2.8mm FIBRE OPTIC CABLE - AQUAMulti Mode. Duplex 50:125um. Fibre Class OM3 for Ethernet Networks up to 10 Gbit. Suitable for use in OM2 and OM3 applications Male to Male. Cable O.D. 2.8mm. Tested and Certified. Colour: Aqua Blue FDL 2M OM3 50/125 LC-SC DLX 2.8mm FIBRE OPTIC CABLE - AQUA

CNL 0.3M OM4 LCLC DX Aq Ls OF

Cablenet 0.5m OM3 50/125 LC-ST Duplex Aqua LSOH Fibre Patch Lead Our LC-ST OM3 Multimode patch leads are used particularly in 1 Gb/s. 10 Gb/s and short distance. high bandwidth applications.All assemblies are fully tested during manufacturing and are supplied with test results.OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.Non-stocked configurations (length. colour. connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-ST OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our SC-SC OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-SC OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-ST OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our SC-SC OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our ST-ST OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-SC OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-ST OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

CNL 10M OM4 B12 MPO 12F Aq TRUNK M-B

Trunk cables have an MPO connector at each end and are ideal for creating a structured cabling system including backbone and horizontal interconnections.

In a Data Centre environment with ever-increasing bandwidth and network connections conventional duplex fibre leads are unable to meet these increased demands. This is where MPO cables are the perfect solution. A single MPO connector can house up to 24 fibres in a form-factor that is very similar in size to a duplex LC connector. Using MPO trunk and breakout cables allows much higher density cabling.

12 fibre available from stock with 24 fibre upon request - contact sales for more information.

Lengths available are:-
OM3 and OM4 - …

Our LC-LC OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-SC OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3. 00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-SC OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our LC-ST OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Cablenet 1m OM3 50/125 SC Pigtail Aqua Fibre Pigtail 900um These Fibre Pigtails are terminated with a quality SC connector on one end. with a 1m length of 900 micron OM3 (Multimode) fibre

Cablenet 1m OM3 50/125 SC-SC Duplex Aqua LSOH Fibre Patch Lead Our SC-SC OM3 Multimode patch leads are used particularly in 1 Gb/s. 10 Gb/s and short distance. high bandwidth applications.All assemblies are fully tested during manufacturing and are supplied with test results.OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.Non-stocked configurations (length. colour. connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Our ST-ST OM3 Multimode patch leads are used particularly in 1 Gb/s 10 Gb/s and short distance high bandwidth applications.
All assemblies are fully tested during manufacturing and are supplied with test results.
OM3 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION

Cablenet 1m OM4 50/125 LC Pigtail Aqua Fibre Pigtail 900um These Fibre Pigtails are terminated with a quality LC connector on one end. with a 1m length of 900 micron OM4 (Multimode) fibre

Cablenet 1m OM4 50/125 SC Pigtail Aqua Fibre Pigtail 900um These Fibre Pigtails are terminated with a quality SC connector on one end. with a 1m length of 900 micron OM4 (Multimode) fibre

Our SC-SC OM4 Multimode fibre optic patch leads are typically used in 10 40 and 100Gb/s applications where the high bandwidth requirements and transmission distances have shown a need for a higher performing Multimode system.
OM4 Multimode fibre optic patch leads are backwards compatible with OM3
All assemblies are fully tested during manufacturing and are supplied with test results.
OM4 Multimode patch leads are supplied with a strain relief boot and 3.00mm Aqua LSOH cable jacket as standard.
Non-stocked configurations (length colour connectors and cable type) can be manufactured to meet specific requirements - PLEASE CONTACT SALES FOR MORE INFORMATION