Car Bulbs

Halogen indicator position light for front surface-mounting (left / right, horizontal) - with ECE approval The flashing light has 2 light functions: Flashing light / position light. flashing light yellow, position light white Lamp type: P21W/R5W, without bulbs, without gasket, with grommet, 2 fixing screws B3.9 x 16 Length: 158mm - Width: 64mm - Height: 51mm - Lamp Type: R5W/P21W - without gasket/seal - without bulbs Light functions: 2 - with position light/with indicator ECE approved Housing Colour: Black - Colour: Yellow/White

Lamp Type: C5W/P21W - without bulbs Light functions: 2 - with indicator/with position light Appr. stamp: E1 42712/E1 53209/ECE Colour: White/Yellow

State-of-the-art LED technology enables an optimum signal image with low power consumption Reverse polarity protection: Incorrect contact between poles ensures that the luminaire is not damaged Tested according to HELLA standard 67101,IP 6K9K, protected against high pressure / steam jet cleaning. The luminaires are tested according to HELLA standard 67101 class 4.1. The high vibration resistance makes this product ideal for use in heavy construction machinery. Ø: 55mm - Height: 64mm - Lamp Type: LED - Number of LEDs: 3 Light functions: 1 - with indicator (LED) CCC approved - Prot.type (IP Code): IP6K9K

Stylish, contemporary clear glass design Optimised light output Reverse polarity protection prevents damage due to faulty contacting Extremely long service life thanks to the use of high-performance LEDs Ø: 66mm - Height: 42mm - Lamp Type: LED - Number of LEDs: 12 - without screw Light functions: 1 - with indicator (LED) Prot.type (IP Code): IP5KX/IPX9K

LED indicator light (tail lift light) for rear mounting on tail lifts - with ECE approval, without indicator failure check The flashing light has 1 light function: Flashing light With 12 yellow LEDs, 2 fixing screws M6, with moulded leads, zinc die-cast housing Length: 108mm - Height: 75mm - Lamp Type: LED - Number of LEDs: 12 - without indicator failure control Light functions: 1 - with indicator (LED) ADR/GGVS approved/ECE approved - Prot.type (IP Code): IPX9K/IP6K7 Colour: Yellow

Halogen indicator for rear installation (left / right) - with ECE approval The flashing light has 1 light function: Flashing light Lamp type: PY21W, without bulbs, with grey lens, fits Ø 90 mm headlamps Ø: 55mm - Height: 88mm - Lamp Type: PY21W - without bulbs Light functions: 1 - with indicator CCC approved - Prot.type (IP Code): IPX9K/IP5KX

Lamp Type: P21W - without bulbs Light functions: 1 - with indicator Appr. stamp: E1 32619/ECE

Lamp Type: P21W - without bulbs Light functions: 1 - with indicator Appr. stamp: E1 42764/ECE

Lamp Type: P21W - without bulbs Light functions: 1 - with indicator Appr. stamp: E1 42763/ECE

Lamp Type: K (18W) - without bulb Light functions: 1 - with indicator Appr. stamp: K 23267

Lamp Type: K (18W) - without bulb Light functions: 1 - with indicator Appr. stamp: K 12642 Housing Colour: Chrome

Length: 235mm - Long gooseneck: 195mm Housing Colour: Black - Frame Colour: Black - Light functions: 2 - with reading light/for cabin light/with cabin light with holder/with bulb Cable: 100mm

Suitable for wall thicknesses of 0.3 - 1.8 mm, installation Ø: 17.5 mm With steel frame and screw connections The indicator light has 1 light function: Interior light (green) Fitted Ø: 17.5mm - for wall thickness: 0.3mm - to wall thickness: 1.8mm Light functions: 1 - with cabin light without bulb - with screw connection 2-pin connector

Suitable for wall thicknesses of 0.3 - 1.8 mm, installation Ø: 17.5 mm With spade terminals and screw fixing The indicator light has 1 light function: Interior light (blue) Fitted Ø: 17.5mm - for wall thickness: 0.3mm - to wall thickness: 1.8mm Light functions: 1 - with cabin light without bulb Plug: Blade Terminal - 2-pin connector

Suitable for wall thicknesses of 0.3 - 1.8 mm, installation Ø: 17.5 mm With screw fastening The indicator light has 1 light function: Interior light (red) Fitted Ø: 17.5mm - for wall thickness: 0.3mm - to wall thickness: 1.8mm Light functions: 1 - with cabin light without bulb - with screw connection 2-pin connector

Osram 7528 Bulb, Indicator Osram Assembly Parts

Part No: 286A T5 2721 Voltage: 12v Watts: 1.2w Base: W2x4.6Dd 5mm Wedge Base (push fit) Quantity: 10

Bulbs with original equipment quality Suitable for all types of vehicles with different needs Long service life: thanks to the high quality materials and components used Good price-quality ratio ECE approved Quantity: 2 bulbs

Bulbs with original equipment quality Suitable for all types of vehicles with different needs Long service life: thanks to the high quality materials and components used Good price-quality ratio ECE approved Quantity: 2 bulbs

Quantity Included: 1 Bulb Road Legal: Yes legal for use in Europe

The reflector is based on open space technology. In combination with a structured glass diffuser, this ensures intensive illumination of the working area at close range. The housing of this robust worklight is made of acid and corrosion resistant, glass fibre reinforced plastic. To protect the glass diffusing panel, the housing is provided with a protruding edge on its front side. Thanks to its compact external dimensions, the Picador FF can be installed in most places. The swivel joint makes it easy to align the worklight so that the working area can be optimally illuminated. Lamp Type: H3 - Power consumption: 70/35W Patterned diffusing lens

The light output of the four high-performance LEDs is a powerful 1,200 lumens. The innovative heat-conducting plastic housing is additionally equipped with cooling fins, which ensure the necessary heat dissipation of the high-power LEDs. The light is distributed by a specially developed multi-facetted reflector and ensures homogeneous illumination. With a colour temperature of 6,500 Kelvin, the light of the LED worklight is very similar to daylight. The new material offers the advantage of complete corrosion resistance in addition to weight savings. Lamp Type: LED - Number of LEDs: 4 - Power consumption: 15W - Colour Temperature: 6500K Patterned diffusing lens

16 high-power LEDs with an enormous light output of 3,000 lumen provide better visibility than with xenon. This is made possible by a light colour similar to daylight. Particularly resistant to mechanical impact due to nylon diffusing disc. Die-cast aluminium housing, stainless steel holder No interference with electronic devices such as radio. Overheating protection through integrated thermosensor Lamp Type: LED - Number of LEDs: 16 - Power consumption: 43W - Colour Temperature: 5700K Clear diffusing lens

The classic worklight Compact and robust For versatile applications Lamp Type: H3 - Power consumption: 55/70W Patterned diffusing lens Prot.type (IP Code): IP5K4K Synthetic Material Housing - Housing Colour: Black - Diffusing Lens Material: Polyamid 12