Other Power Tools

A superbly powerful EURO 5 compliant pressure washer! The tough and rugged PLS265B petrol driven pressure washer is built specifically for use by garages fleet operators plant hirers and contractors.The highly efficient direct drive means that there are no belts or pulleys to replace and the overall reduction in vibration means there is less unnecessary stress on the motor which in turn will boost the lifespan of the washer.Powered by a highly reliable petrol engine the PLS265B pressure washer is built into a tough protective all-steel frame with extra-large 13in pneumatic tyres for easy mobility across uneven ground.Supplied with a suction hose and filter for drawing water from a water butt …

A superbly powerful EURO 5 compliant pressure washer! The tough and rugged PLS360 petrol driven pressure washer is built specifically for use by garages fleet operators plant hirers and contractors. The highly efficient direct drive means that there are no belts or pulleys to replace and the overall reduction in vibration means there is less unnecessary stress on the motor which in turn will boost the lifespan of the washer.Powered by a highly reliable petrol engine with key-start operation the PLS360 pressure washer is built into a tough protective all-steel frame with four extra-large 10in pneumatic tyres and anti-vibration for smooth running and easy mobility across uneven ground. The …

Pair of Clarke CAX2TFB Strong Arm 2 tonne folding Axle Stands - Welded steel construction for increased strength and safety with a tough and durable powder coated finish.

With a combined capacity of 3 tonnes and finished with a tough anodised coating, these aluminium axle stands are perfect for use by the home mechanic. These stands are designed with a U-shaped saddle for secure and even load distribution, with a wide base for stability. The stands are fitted with a pin & chain load support offering 5 height positions 6 height positions from 271-396mm

The Clarke StrongArm CAX3TPB 3 tonne axle stands are manufactured from welded steel wiith a durable powder coating for increased strength and safety. The stands are designed with a 'U' shaped saddle for even load distribution and 5 pin positions allowing a height range from 300-490mm.

Heavy duty welded steel construction for increased strength and safety. Suitable for commercial vehicles.

The Clarke CFSR500 Steel Folding Ramps provide a safe and simple solution for unloading from vehicles or trailers (when extended) and for use as a vehicle ramp (when folded). Ideal for use with vans, trailers, tractors, lawnmowers, quadbikes, motorbikes and various other vehicles. These ramps include safety chains to ensure they are secure when loading, carrying straps and tyre stops to prevent vehicles from rolling.

An extra strong construction, easy to use machine for bending all manner of steel pipe up to 180°. Ideal for use on a variety of pipework installations and for general engineering applications. The heavy duty powder coated steel frame is fitted with a robust single piston hydraulic unit, which progressively applies up to 12 tons of pressure

A great 1.5 tonne low entry (85mm) height adjustable aluminium/steel garage jack benefiting from a twin piston pump for a quick lift action. Features include a rubber pad which protects the vehicle underside and steel swivel castors for easier movement. Ideal for use with motor vehicles.- Lightweight aluminium/steel construction with a superb tough blue anodised finish- Lifting capacity: 1.5 tonnes- Safe & simple to operate twist lock/unlock valve- Twin piston pump quick lift action- Saddle heights; min 85mm / max 365mm- Dimension (HWD) 200x555x240mm- Weight: 14.3PTDCLA7612633

Csa30Fpb 30 Tonne Shop PressPTDCLA7615201

Csa50Fpb 50 Tonne Shop PressPTDCLA7615203

The Clarke CPS30T is a combination of a protective steel grid guard with a protective Polycarbonate screen built for safe operation of the CSA30FPB 30-tonne Floor Press. The locking pins enable easy adjustment of the protective screen height. The CPS30T Protective Screen and the full Clarke Strong Arm range of pneumatic presses are provided with a 12-Month Manufacturer's Warranty. Also available is the Clarke CPS50T Protective Screen, designed for use with the larger CSA50FPB 50-tonne Press.

A great 2.5 tonne low entry (100mm) height adjustable aluminium/steel garage jack benefiting from a twin piston pump for a quick lift action. Features include a rubber pad which protects the vehicle underside and nylon non-marking wheels for quieter movement. Ideal for use with sports and racing cars.- Lightweight aluminium/steel construction with a superb tough blue anodised finish- Lifting capacity: 2.5 tonnes- Safe & simple to operate twist lock/unlock valve- Twin piston pump quick lift action- Saddle heights; min 100mm / max 465mm- Dimension (HWD) 220x660x290mm- Weight: 25.39PTDCLA7621803

Clarke's CTJ3000C heavy duty trolley jack is designed specifically for use in professional garages and workshops. This jack's features include a single piece hydraulic unit for maximum reliability, heavy gauge base construction and heavy duty wheels and castors.

The CTJ2250LP is a 2.25 tonne low profile trolley jack ideal for use with cars with low ground clearance. Featuring swivel castors for manoeuvrability, simple to operate lock/unlock valve for raising and lowering, rubber contact pad to prevent chassis damage and extra wide wheels for safe, stable use. This great value jack also comes with a dual purpose wheel handle/brace and two double ended sockets, suitable for a wide range of wheel nuts, meaning the CTJ2250LP is not only ideal for garage use, it’s the perfect jack for quick wheel changes in emergency situations.

This Clarke trolley jack benefits from an extra low saddle and frame as well as a slow release function for additional safety. Its rubber contact pad prevents damage to vehicles, while the rear swivel casters make manoeuvring the trolley jack easy without sacrificing stability. The nylon wheels and casters prevent marking on smooth garage floors.

Clarke's CTJ4000G heavy duty trolley jack is designed specifically for use in professional garages and workshops. This jack's features include a single piece hydraulic unit for maximum reliability heavy gauge base construction and heavy duty wheels and castors.- Lifting capacity 4 Tonnes- Extra strong 2 piece handle with positive twist locking & release mechanism- Saddle height: 105mm min 520mm max- Automatic overload protection- Dimensions - 720 x 374 x 105mm- Weight 45.5PTDCLA7623206

Designed for raising and lowering cars and vehicles in a workshop or garage environment. Lightweight and portable with a handy blow-moulded carry case for storage this kit will enable you to easily replace parts repair or perform maintenance on your vehicle safely and efficiently.Kit Comprises:1 x 2 Tonne Hydraulic jack trolley1 x Jack Handle2 x Wheel Chocks2 x Axle Stands1 x Instruction ManualPTDCLA7623300

The Clarke SSC1000G is a hydraulically powered foot control operated device designed for the safe dis-assembly of car and van suspension struts. Using the SSC1000 is much much easier and more convenient than using a more conventional manually operated device. Adjustable spring retainers enable the compressor to be used for springs up to 400mm diameter & 520mm in length and this unit is completed with a durable build to ensure excellent quality.Specifications- Adjustable spring retainers- Maximum compression 1000 / 1 Tonne- Can be used for springs up to 400mm diameter & 520mm in length- Weight: 34.9PTDCLA7630030

Car maintenance is made a whole lot easier with the aid of a mechanics seat. Sit in comfort when undertaking a whole host of automotive repair jobs. This height adjustable unit features five easy rolling castors for manoeuvrability and easy to reach tool storage tray.

This sturdy, all steel tool box is ideal for the safe and convenient storage of a variety of tools and equipment. Complete with carry handle and tough powder coated finish.

This twin unit set comprises the Clarke CTB100 and CTB400 tool boxes. Each of these sturdy steel units has a tough powder coated finish and is ideal for the safe and convenient storage of tools and equipment.- Fitted with lock bracket (padlocks required - not supplied)- Dimensions (WxDxH): 467x210x150mm- Weight: 3.5PTDCLA7631016

Cantilever design tool box for easy tool access and organisation. This lockable box (padlock required - not supplied) offers safe storage all steel construction and a tough powder coated finish.- Complete with carry handle- Dimensions (WDH) 467x209x170mm- Weight 2.7sPTDCLA7631021

The CTB500 cantilever tool box offers easy storage access and organisation for a variety of hand tools.- All steel construction with a tough powder coated finish- Carry handle- Fitted with lock bracket (padlock required - not supplied)- Dimensions (WxDxH) 466x209x233mm- Weight 4.3PTDCLA7631026