Other Power Tools

The DeWalt DCH966 54v XR FlexVolt Cordless Brushless Demolition Hammer Drill is the ultimate tool for heavy-duty demolition and drilling tasks on construction sites or in demanding industrial environments. Powered by DeWalt's innovative FlexVolt battery system, this cordless hammer drill delivers the performance and runtime of a corded tool with the convenience of cordless operation. Equipped with a powerful brushless motor, the DCH966 provides unmatched drilling and chipping power, allowing users to tackle even the toughest materials with ease. Whether you're breaking through concrete, brick, or masonry, this demolition hammer drill gets the job done quickly and efficiently. Features & Benefits …

This handheld cordless impact wrench is intended to tighten and loosen mechanical fixings such as nuts, bolts etc. The super bright LED work light comes in useful when working on the underneath of cars in low light conditions. This set comes with 2 batteries, so you'll always have back up ready to use on the included charger. Specifications Part of the D20 series Brushless motor Super bright LED work light Variable speed control with electronic brake Belt clip Supplied with 2 x 2Ah batteries, charger Battery: D20 20V Li-ion Impact Rate: 0-3300bpm No load speed: 0-2200rpm Max Torque: 250Nm Variable speed: Yes Square Drive: 1/2" Batteries Per Item: 2 x 2Ah Charger Type: 1.65A Supplied in Case: …

Features: XP20 multi - tool battery system, Brushless technology, Intelligent electronics, 3 electronic torque settings, Electronic self - driving mode, FG reinforced housing, Compact 130mm length, Quick - release hex bit holder, Self - drilling mode for fastening self driving screws, Super bright LED worklight, Variable speed control with electronic brake, Supplied with tough carry case fitted with metal clasps, XP20 interchangeable battery system allows you to combine one battery with any of the tools within the XP20 series.

Suitable for spraying a wide range of oils, cleaning agents and rust proofing liquids. Fitted with adjustable nozzle. Display packed.

This handheld cordless impact wrench is intended to tighten and loosen mechanical fixings such as nuts, bolts etc. The super bright LED work light comes in useful when working on the underneath of cars in low light conditions. The battery is sold separately, however it can be used with any of D20 series models. Specifications Part of the D20 series Brushless motor Super bright LED work light Variable speed control with electronic brake Belt clip Batteries and Chargers are available separately Battery: D20 20V Li-ion Impact Rate: 0-3300bpm No load speed: 0-2200rpm Max Torque: 250Nm Variable speed: Yes Square Drive: 1/2" Supplied in Case: No Weight (bare tool): 1.1kg Colour: Blue #html-body …

This underbody coating gun is air powered and designed for general automotive and industrial applications. It is ideal for rustproofing and is suitable for various primer and sub-coat paints, accepting most types of 1L coating tins. It is robust and made from lightweight aluminium. Supplied with 1/4" BSP adaptor.

Kit for the hobbyist or semi - professional user alike. Designed for use with receiver compressors, the kit gives various options of spraying, inflating and cleaning, all in one multi - purpose kit. Fittings all 1/4" BSP male thread.

High pressure suction feed spray gun with fully adjustable spray pattern and dual action trigger. Can be used on cellulose, metallic, synthetic and other similar viscosity paints. Ideal for most basic spray shop applications. Supplied with cleaning brush. Display carton.

• Multi-application air tool kit with a solution for spraying, inflating and cleaning • Paraffin/washing spray gun with 900ml capacity pot • Air inflator with pressure gauge, 360mm flexible air hose and clip on valve connector • Gravity fed spray gun with 500ml capacity pot • Air blow gun • 5m Flexible recoil air hose • Lightweight aluminium bodyThis multi-application air tool kit includes a solution for spraying, inflating and cleaning. Made from lightweight aluminium. Complete with 5m flexible recoil air hose. The air inflator has a fitted pressure gauge and comes with a 360mm flexible rubber air hose and clip on valve connector. The gravity fed spray gun has a 500ml capacity pot. There is …

Air brush kit ideal for base coating, stencilling and touch-up projects. Precision air brush gun with an adjustable spray pattern from 6.3-12.7mm. Complete with accessories including 1/4" adaptor, 1.5m air hose and glass paint pots. Supplied in a plastic case with transparent lid.

For use with Draper Air Hammers and other manufacturers similar machines. Shank 10.18mm. All chisels must be used with a chisel retaining spring, Stock No.00092.

Suitable for cleaning liquid, swarf or dust during manufacture or assembly. Supplied with safety nozzle. 1/4" BSP air inlet.

Suitable for cleaning liquid, swarf or dust during manufacture or assembly. Supplied with safety nozzle. 1/4" BSP air inlet.

Suitable for cleaning liquid, swarf or dust during manufacture or assembly. Supplied with safety nozzle. 1/4" BSP air inlet.

Suitable for cleaning liquid, swarf or dust during manufacture or assembly. Supplied with safety nozzle. 1/4" BSP air inlet.

3mm air die grinder collet.1 x 3mm Air Die Grinder Collet for 38147 and 20556 Air Die Grinder and Kit

This underbody coating gun is air powered and supplied with a 300mm flexible nozzle for accurate spraying and access to confined spaces. It is ideal for use on vehicle chassis when rustproofing and is suitable for various primer and sub-coat paints, accepting most types of 1L coating tins. It is robust and made from lightweight aluminium. Supplied with 1/4" BSP adaptor.

Expert Quality, new and improved MK4 airline inflator. Its industrial quality fabrication makes it suitable for use on garage forecourts and tyre fitting bays. Fitted with a twin open ended connectors, 20% larger viewing window, stronger yet lighter body and increased accuracy. Supplied with calibration certificate.

Expert Quality, new and improved MK4 airline inflator. Its industrial quality fabrication makes it suitable for use on garage forecourts and tyre fitting bays. Fitted with a lock-on connector, 20% larger viewing window, stronger yet lighter body and increased accuracy. Supplied with calibration certificate.

This 12V analogue tyre inflator is designed primarily for the rapid inflation of car, bicycle, motorcycle and small commercial vehicle tyres. It's also supplied with a range of adaptors (three) to make it suitable for the inflation of balls, toys and other inflatable products. It features a built-in LED worklight and has a three metre power cord with 12V power plug and includes a spare fuse. Dial readings are in psi/bar, and the inflator has built-in compartments for the power cord, air hose and accessories. Features: Designed for the rapid inflation of car, bicycle, motorcycle and small commercial vehicle tyres The three adaptors make the inflator suitable for inflating smaller products, such …

Manufactured from aluminium and steel, this air powered caulking gun is perfect for many applications. It is designed to provide fast distribution of all types of sealants and glues, and the trigger ensures a smooth and even spread, providing complete control for the user. The steel cartridge holder is designed to accept a standard C3/310ml cartridge and even loaded, the unit is lightweight.

75mm compact air cut - off tool for cutting auto body panels and light metal. Manufactured with a composite housing fitted with a 360° rotating guard and an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. The paddle trigger provides easy start and control whilst the adjustable 4 - speed rear regulator helps deliver precision cutting when required. Attached with a 1/4" BSP airline connector which connects with the 360° rotating air inlet, helping prevent air - lines from kinking when in use. The ergonomic design and lightweight housing assist in prevention of the cold - sink effect.

Manufactured from steel and aluminium, this air grease gun is suitable for automotive, agricultural and industrial applications. There is a pistol style hand grip for maximum user control and the cartridge chamber can be used with filler pump, bulk or a standard 400cc grease cartridge. It is supplied with both a flexible and an angular rigid steel delivery tube and has a 1/4" BSP connector.

Compact straight die grinder kit perfectly designed for grinding and polishing metal components. Manufactured from lightweight Aluminium housing attached to an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. Fitted with a lever block trigger for increased safety and an adjustable 4 - speed rear regulator. Attached with a 1/4" BSP airline connector which connects with the 360° rotating air inlet, helping prevent air - lines from kinking when in use all stored in a robust plastic carry case. The ergonomic design and lightweight housing assist in prevention of the cold - sink effect.