Inexpensive other car electronics

Features: 1. Sharp steel probes can easily pierce wire insulation to check circuits. 2. The probe pen is ideal for checking circuits, fuses, switches and wiring in cars, trailers, boats, motorcycles and other low voltage systems. 3. Ground the alligator clip and test the circuit with a probe. When the light is on, there is electricity. instructions: 1. Clip the measured alligator clip to the ground wire (such as the metal or negative pole of the car) 2. Measure the conductive metal in the test circuit with the needle of the electric pen 3. If the light bulb of the stylus will light up, it means that the measured point has formed a circuit and works normally. On the contrary, there is a

Description : *ONT WASTE YOUR MONEY ON MORE EXPENSIVE COMPLICATED MACHINES! FIND YOUR LEAKS IN LESS THAN 5 MINUTES AND SAVE! *EVAP Smoke Machine Diagnostic Emissions Vacuum Leak Detection ECONOMY tester! *Most economic and practical smoke machine available! *No annoying or silly compressor or fluids needed! Only cigar! *Solve those pesky P0442 P0445 P0446 codes yourself and save hundreds! *Color：Yellow+Blue *Material:plastic Solve these error codes!: P0171 - Fuel System Too Lean (Bank 1) P0174 - Fuel System Too Lean (Bank 2) P0440 - Evaporative Emission Control System Malfunction P0441 - Evaporative Emission Control System Incorrect Purge Flow P0442 - Evaporative Emission Control

Description Coin type spark plug gap measuring tool High accuracy by die-casting process Features easy-to-read, clear scale Heavy-duty construction ensures strength and durability Specification Material: solid alloy steel color:as the picture Size: 37 mm in diameter Measuring range: 0.60-2.4 mm Function: Round hole can be used to adjust the spark plug gap, can also be hung on the key ring How to use: Insert the edge of the coin into the ignition gap of the spark plug and move it to just the right position to catch Package includes: 1×spark plug gap measuring tool

Indicator Description: 1.5 LEDs indicating the water % in the brake fluid: 2.0% light indicates that the battery is OK, no replacement 3.1% light indicates that moisture content of brake oil less than 1% , brake fluid has a good performance, and ease of use. 4.2% light indicates that moisture content of brake oil less than 2%, brake fluid can be continued to use 5.3% light indicates that moisture content of brake oil less than 3% , proposed to replace brake fluid. 6.4% light indicates that moisture content of brake oil less than 4%, brake fluid should be replaced immediately. 7.Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Description: Function: Read diagnostic trouble codes(over 3000 generic code definitions in the database); Clear trouble codes and turn off the MIL ("Check Engine"" light); Display current sensor data. Display current sensor data

Description: 100% brand new and high quality Material:Copper (Nickel plating) Color: as shown in pic Features: 1.the unique long-life light tube, not produce heat, comfort and safety. 2.lnnovative flexible wire lead has good tensile strength. 3.small volume, compact structure, equipped with a clip, convenient to carry and use Tester Length: (Approx) 10.6cm Cable Length (Unstretched): 62cm Testing Range: DC 6V-12V-24V Quantity:1PC Note: You must not operate this tester beyond its testing range. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1x Auto Circuit Tester

Highlights For ELM327 V2.1: ELM327 MINI OBD SCAN is the newly developed wireless scan tool. It supports most standard OBD-II protocols Hardware V2.1,Software V2.1 Bluetooth Password :0000 / 1234 / 6789 Woks on Android Torque (support Android smart phone System with Android 4.0-Android 4.4 version) /PC( win XP/WIN 7 32bits and close anti-virus programm),BUT IT NO WORKS iOS! It CAN'T support for Diesel or Trucks. This ELM327 V2.1 supports most of OBD-II protocols cars,but it can not do all models ,also some OBDII protocols may do not support( like J1850 VPW &J1850 PWM protocols no supports). Hardware V2.1 Supprots 7Protocols:

Very glad to see you in my shop. Featura： 1、Automotive Circuit Tester Used to Check Electrical Circuits and Accessories on All 6V12V24V Systems. 2、Automotive Circuit Tester with Great Flexibility, Rang and Freedom, Innovative Elastic Test Lead has Good Tensile Capacity, you can Stretch when Using and Then it will Automatically Retracts. 3、Automotive Circuit Tester with Heavy Duty Ground Clip and Insulator Allows you to Quickly and Easily Check the Circuit While Ensuring your Safety. 4、Automotive Circuit Tester is a simple and useful tool. If you are trying to diagnose and solve an electrical problem, sometimes a test light can help you rule out possible causes much quicker

Specifications: NitroOBD2 is a plug and drive ready device to function the increasing the performance of engine. NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. It works based OBD2 protocols as remaping the car's computer ECU. After driving 200 km road total, NitroOBD2 adjusts itself to the car according to the drivers' habits. Item Name: Chip Tuning Box Quantity: 1 Pc Function: Power Enhancer Type: Red: for Diesel Engine, Yellow: for Gasoline Engine Features: Car Accessory, Universal, Plug and Drive Size: 5cm x 3.5cm x 2.7cm/1.97" x 1.38" x 1.06" (Approx.) Notes: Due to the light and screen setting difference,

Newly developed bluetooth ELM327,support all OBD-II protocols as follows: ISO15765-4 (CAN); ISO14230-4 (KWP2000) ISO9141-2 Function: 1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 2.Clear trouble codes and turn off the MIL ("Check Engine" light) 3.Display current sensor data, including: 4.Engine RPM 5.Calculated Load Value 6.Coolant Temperature 7.Fuel System Status 8.Vehicle Speed 9.Short Term Fuel Trim 10.Long Term Fuel Trim 11.Intake Manifold Pressure 12.Timing Advance 13. Intake Air Temperature 14.Air Flow Rate 15.Absolute Throttle Position 16.Oxygen sensor voltages/associated

Features: LED display cigarette lighter electric voltage meter for auto car battery. Car battery voltage display. Powered by car cigarette lighter charger (DC 12~24 V). Installation: Insert the jack of the product into a cigar socket. This digital gauge displays the voltage of batteries in the car. With the high brightness of the LED(light-emitting diode), there is no difficulty in seeing the display. Installation: Clean the cigar socket. Insert the jack of the product into a cigar socket. Description: Display Type: Digital Operating Temperature: -10 to +80 Celsius degree Accuracy Class: high Item Type: Battery Testers Voltage: DC12-24V When the engine running (do not drive), the LED

Features: 100 brand and high quality. It is durable and convenient. Work with all OBD2 compliant vehicles. Enable to read diagnostic trouble codes. Small bluetooth interface with a 16 pin socket. Support different kinds of devices to use this scan tool. Communication agreement: 1. SAE J1850 PWM (41.6K baud) 2.SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2 (5 baud initialization, 10.4 kilo baud) 4. ISO14230-4 KWP (5 baud initialization, 10.4 kilo baud) 5. ISO14230-4 KWP (quick start, 10.4 Kbaud) 6. ISO15765-4 CAN (11-digit ID, 500 Kbaud) 7.ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11-digit ID, 250 Kbaud) 9.ISO15765-4 CAN (29bit ID, 250 Kbaud) Characterization: Type:ELM327 OBD2

Details: * 100% brand new and high quality * Made of high quality material, durable and practical to use * Color: Transparent * Acrylic case for LCR-T4 transistor tester * Suitable for LCR-T4 transistor tester diode triode capacitance ESR meter *Easy to assemble, Durable in use Package Contents: 1*Transistor Tester Case (Transistor Tester not included) Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

Features: Display current sensor data, including: Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim. Display current sensor data, including: Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel trims, Fuel System status, Fuel Pressure etc. Clear trouble codes and turn off the MIL (""""Check Engine"""" light) Operation system supports: for Android Smartphones(mobile phone, tablet), most computer system(except for Apple system), and all these device must have Bluetooth function. Vehicle Coverage: Works on

Warm Tips: 1. ELM327 V1.5 For 1992-2021 Car. 2. If you can not confirm the year of your car, please choose the V1.5 Version, it is compatible with most cars. 3. The Bluetooth ELM327 is for Android.IOS.PC. 4. Without CD. Mini OBD2 Bluetooth Scanner Functions: 1: Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 2: Clear trouble codes and turn off the MIL ("Check Engine" light) 3: Display current sensor data, including: 4: Engine RPM 5: Calculated Load Value 6: Coolant Temperature 7: Fuel System Status 8: Vehicle Speed 9: Short Term Fuel Trim 10: Long Term Fuel Trim 11: Intake Manifold

Specifications: This digital gauge displays the voltage of batteries in the car. With high brightness of LED, there is no difficulty in seeing the display. Powered by car cigarette lighter charger. Constantly monitor battery voltage, extend and protect the battery and engine life. Installment: insert the jack of the product into a cigar socket. When engine running(do not drive), the LED display: Between 13.5 to 14.5 (12V Car) Between 26.0 to 28.0 (24V Car) Type: Car Voltmeter Material: Plastic Color: Black Attention: for DC 12V or 24V Car Measuring Range: DC 8V - 30V +/-%1.2 Features: Easy to Use, LED Display, Practical Dimension: 7cm x 4cm x 2.9cm(Approx.) Notes:

Specifications: DC 6V to 24V voltage test pencil. A perfect tool for home and electric industry uses. Ideal design for testing power cables, circuit breakers, etc. Type: Test Pencil Shell Material: Copper Plated Test Voltage Range: DC 6V to 24V Features: Safety, Easy to Use, Alert Tester Pen Length: 11.5cm/4.53" (Approx.) Suitable for: Test automotive short circuit. Car battery performance testing. Charging system performance testing. Performance ignition systems testing. Notes: 1. Due to the light and screen setting difference, the item's color may be slightly different from the pictures. 2. Please allow slight dimension difference due to different manual measurement. Package Includes:

"The brake fluid tester pen measures the change of water content in brake oil based on the change in conductivity. It clearly shows the degree of water content through the LED. The high water content will cause the boiling point to decrease, affecting the braking performance, and also corroding the brake master cylinder and the sub-pump to cause rust and seizure. Red light indicates that the brake fluid needs to be replaced immediately, green light indicates good condition, and yellow light indicates that the condition is acceptable, but it is about to be replaced. Its operation is simple with accurate and fast testing. Specification: Product size: 150 x 25 x 25 mm/5.90 x 0.98 x 0.98""

Features: 1. check the car's quality oil brakes 2.5 LED display lights the percentage of moisture content in the brake fluid, as the test results are more accurate 3. Press the button to turn on, the green LED will light up. 4. Insert the tester into the tank for a second, then the results will be indicated correctly using the LEDs. 5. Testing POINT 3, DOT4, DOT5 brake fluid 6. Auto power off, Supports 1 LR03 AAA battery (not included) Indications: Green: Battery OK, i.e.: No Water Contained in the Brake Fluid Yellow: Less than 1% of Water Content in Brake Fluid Yellow/Yellow: Approximately 2% of Water Content in Brake Fluid Yellow/Yellow/Red: Approximately 3% of Water Content in Brake

Automotive Mechanics Stethoscope Engine Cylinder Diagnostic Tester Detector Vibration and noise detect is one of the normally way to find trouble in rotating machinery. Noise detect was widly used in Engine cylinder diagnostic and other industry area. Intercepting Engine or other parts noise will help us find the worn out or break down component quickly and exactly. The cylinder stethoscope basic and portable tool for detecting vehicle trouble. It will detect noise from Bearings,gears,valve,crankshaft,cylinder,gearbox... help technician find the trouble exactly. Saving time and increase efficiency during the repairing. Fit For: The stethoscope can be used in all rotary and reciprocating

Features: 1. The hydrometer battery tester lets you know the state of charge of your battery with confidence. 2. You can use hydrometer battery tester to read and understand the battery level accurately and quickly. 3. High-quality durable material can ensure stable performance and durability. 4. It only has a very small size, so you can store the hydrometer battery tester in your car very conveniently. 5. This deep cycle battery testing hydrometer fits most systems. Assemble Before Use: (1) Install the red rubber pad with holes, mainly to prevent the density meter from being sucked into the gasbag go inside (2) Then install the density meter into the glass tube (3) Install the suction

Features: It is very suitable for finding out the problems of the car engine, identifying damaged gaskets, damaged pulleys, damaged gears, valve failures, water pump failures and other damaged parts that cause strange sounds and incorrect operations. It has a sensitive sound chamber that amplifies the sound so that you can easily detect damaged parts in the engine. The tool’s earplugs allow you to ignore outside noise, so you can focus on finding the problem. Easy to find the problem: just find the place where the sound is loudest, and then establish contact between the probe and the surface to confirm. The shockproof handle makes the work safer. Comfortable rubber earplugs can perfectly

AUTOOL Car OBD2 Connector Extension Adapter Auto OBD 2 Extend OBD 16Pin Connect Parts-yellow.

Specifications: The smaller size mini car Bluetooth diagnostic scanner works for Android Torque/PC, which can help you diagnose the trouble of your car. This mini car Bluetooth diagnostic scanner works for Android Torque/PC with the latest software version V2.1 and hardware Version V1.5. Bluetooth Password: 1234. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). Clear trouble codes and turn off the MIL (""Check Engine"" light). Display current sensor data, including: Engine RPM Calculated Load Value Coolant Temperature Vehicle Speed Timing Advance Fuel System Status Fuel Pressure Short Term