Amplifiers Monoprice

Class-d amplifier providing 50 watts/channel (RMS) into 8ohm loads or 65 watts/channel into 4ohm loads. Bridgeable output provides 120 watts into a single 8ohm load 4 pole detachable speaker screw connector (Phoenix connector) with support for up to 12AWG speaker wire. 12-volt trigger input for power-on/off. 12-volt trigger output for controlling other devices. Buffered loop output of original signal for connecting additional amplifiers Rear panel volume gain adjustment. Built-in thermal and short circuit protection circuits Includes rack-mount ears for mounting a single amp or two amps side-by-side

4K@60Hz:This switch supports HDMI video resolutions up to 4K@60Hz, with YUV 4:4:4 chroma sampling. HDCP 2.2 Compliant:High-bandwidth Digital Content Protection (HDCP) is a copy prevention technology that's been used on HDMI connections for over ten years. Compliance with the latest HDCP 2.2 format ensures that the product will not cause any unwanted dropouts or compatibility issues. 2-Channel Analog Audio:This switch can extract 2-channel analog audio from an HDMI video signal. Supports HDR:HDR is an acronym for High Dynamic Range. TVs with HDR show a better, more realistic image with more contrast, brightness, and colors than ever before. HDR significantly expands contrast ratio and color …

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. It can support amplifiers with up to 75 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.

Allows you to connect multiple speaker pairs to a single power amplifier or receiver. It increases the impedance of the connected speaker pair to ensure that the overall impedance level presented to the amplifier is high enough to prevent damage to the amplifier. Supports amplifiers with up to 300 watts of output power. Fits into standard single-gang low-voltage junction boxes or mounting brackets.