Surface Pumps

This professional-grade performance comes from the all-copper pump mechanism at the heart of each unit. Powered by a 1.1kW motor, the pump combines a high-speed performance with a long lifespan to rapidly move water. The all-copper construction means it’s highly resistant to corrosion and rust, and can cope with the most extreme conditions. Features: The stainless steel exterior ensures that this pump is protected against anything you throw at it. It ensures you can always rely on your pump as it won’t be damaged in tough conditions Hard-Wearing Internal SystemThe internal system of the pump is designed to cope with particles of up to 35mm in size. This means it’s perfect for …

This petrol powered water pump can be used to drain pits pools, trenches and foundations as well as for field irrigation. Pump body can pump sand and solids in suspension up to 28 mm in size. It includes hose connections and intake strainer.

The FloodMate 3 is an emergency pumping kit for defending property from low level flooding. This set includes a petrol driven, 1.5HP pump (model WX10, capable of up 80 litres per minute, through 25mm (1") hose, over 30 metres of level ground) All the contents are supplied in a sturdy, easy-to-carry case with lid, and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 3mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Initial priming of the pump with water is required before starting. It will pump water down to 3mm, but it must not run dry and is deal for use

NewJet Submersible pumps The New Jet Multi Use Pump can be used wet or dry.It is fully submersible for use in all types of aquarium and also for use in amphibian housing.The rotor is fitted with a noise reduction device, which whilst keeping the volume down does not detract from the powerful performance of the pump.The ceramic brush and shaft of the rotor are durable and reliable.The pump can be used externally or internally, allowing for greater variation of use.If used externally the front section is removed and the locknut and output tube used. The transition to external use is quick and simple, with full instructions and accessories included.As with all New Jet Multi Use pumps, the motor

NewJet Submersible pumps The New Jet Multi Use Pump can be used wet or dry.It is fully submersible for use in all types of aquarium and also for use in amphibian housing.The rotor is fitted with a noise reduction device, which whilst keeping the volume down does not detract from the powerful performance of the pump.The ceramic brush and shaft of the rotor are durable and reliable.The pump can be used externally or internally, allowing for greater variation of use.If used externally the front section is removed and the locknut and output tube used. The transition to external use is quick and simple, with full instructions and accessories included.As with all New Jet Multi Use pumps, the motor

NewJet Submersible pumps The New Jet Multi Use Pump can be used wet or dry.It is fully submersible for use in all types of aquarium and also for use in amphibian housing.The rotor is fitted with a noise reduction device, which whilst keeping the volume down does not detract from the powerful performance of the pump.The ceramic brush and shaft of the rotor are durable and reliable.The pump can be used externally or internally, allowing for greater variation of use.If used externally the front section is removed and the locknut and output tube used. The transition to external use is quick and simple, with full instructions and accessories included.As with all New Jet Multi Use pumps, the motor

Zipper MUP350 compact 3in1 water pump, ideal for suction of dirty water, clear water, and water from flat areas. Features: Powerful 350 W motor 3-in-1 function pump applicable for dirty water, clear water and flat water Very flat suction (approx. up to 1 mm) Foreign particles up to max. 35 mm - max. water temperature 35°C Max. pump capacity 7.5 m3/h (7500 l/h) Powerful and durable ECO engine Transportable and quick to use Incl. float switch Maximum pump height / depth : 11 m / 3 m Specifications: Dimensions: H:32.6 x W:17.9 x D:17.6 cm Colour: Green Guarantee:1 Year Material: Plastic Model Number: ZI-MUP350

Maxi Jet Pumps Powerful submersible water pumps. Used in the Wilma, Ebb & Flood Aeroponic and larger NFT systems amongst others. Also suitable for DIY systems or to drain tanks with. Features: Can be used externally or submerged. Silent and low maintenance. Offer a 360 degree rotating waterproof outlet. Innovative 3-suction cup mount support bracket. MJ500 Flow Rate: 500 litres per hour Max Jet Height: 1.35m Power Consumption: 6w Outlet Pipe Size: 13mm MJ1000 Flow Rate: 1000 litres per hour Max Jet Height: 1.48m Power Consumption: 13w Outlet Pipe Size: 13mm

Maxi Jet Pumps Powerful submersible water pumps. Used in the Wilma, Ebb & Flood Aeroponic and larger NFT systems amongst others. Also suitable for DIY systems or to drain tanks with. Features: Can be used externally or submerged. Silent and low maintenance. Offer a 360 degree rotating waterproof outlet. Innovative 3-suction cup mount support bracket. MJ500 Flow Rate: 500 litres per hour Max Jet Height: 1.35m Power Consumption: 6w Outlet Pipe Size: 13mm MJ1000 Flow Rate: 1000 litres per hour Max Jet Height: 1.48m Power Consumption: 13w Outlet Pipe Size: 13mm

For use with submersible water pumps. Packed in polybag. Specifications Size: 75mm Length: 10m Colour: Blue

For use with submersible water pumps. Packed in polybag. Specifications Size: 50mm Length: 10m Colour: Blue

Heavy-duty hoses manufactured with a reinforced black liner enabling the hose to withstand a higher bursting pressure. Packed in polybag. Specifications Size: 38mm Length: 10m Colour: Yellow

Heavy-duty hoses manufactured with a reinforced black liner enabling the hose to withstand a higher bursting pressure. Packed in polybag. Specifications Size: 25mm Length: 5m Colour: Blue

The KS1100/PA surface mounted, self-priming “jet” pump is for pumping seawater. The threaded inlet, outlet and shaft are in 316 stainless steel, with a silicon carbide and viton mechanical seal, a pump body in polypropylene, with the impeller and diffuser in noryl. Maximum suction lift is 8 metres. The motor is IP44, has overload protection, is fitted with a rocker switch and has 2 metre long power cable. The chances of corrosion of 316 stainless steel increase with the effects of chloride concentrations, evaporation, temperature, aeration etc, (working individually or together). This model covers most, but not all global seawater conditions.

Hailea Water Pump HX88 Hailea HX88 - High-quality water pumps with high outputs that can move large amounts of liquid efficiently and effectively. ABS Plastic Casings that are Corrosion Resistant Mounted suction cups for easy positioning. It has a high-quality resin is used to create a sealed unit engineered for continuous use and has a high-quality, large-sized filter screen. The Hailea Submersible Water Pump: A fully submersible unit with a large screen filter that stops impurities from passing through and into the piping system. This reduces the chance of blockages and improves efficiency in hydroponic systems. When equipment fails or blocks occur, root systems can dry out. There is a

Hailea Water Pump HX88 Hailea HX88 - High-quality water pumps with high outputs that can move large amounts of liquid efficiently and effectively. ABS Plastic Casings that are Corrosion Resistant Mounted suction cups for easy positioning. It has a high-quality resin is used to create a sealed unit engineered for continuous use and has a high-quality, large-sized filter screen. The Hailea Submersible Water Pump: A fully submersible unit with a large screen filter that stops impurities from passing through and into the piping system. This reduces the chance of blockages and improves efficiency in hydroponic systems. When equipment fails or blocks occur, root systems can dry out. There is a

Hailea Water Pump HX88 Hailea HX88 - High-quality water pumps with high outputs that can move large amounts of liquid efficiently and effectively. ABS Plastic Casings that are Corrosion Resistant Mounted suction cups for easy positioning. It has a high-quality resin is used to create a sealed unit engineered for continuous use and has a high-quality, large-sized filter screen. The Hailea Submersible Water Pump: A fully submersible unit with a large screen filter that stops impurities from passing through and into the piping system. This reduces the chance of blockages and improves efficiency in hydroponic systems. When equipment fails or blocks occur, root systems can dry out. There is a

Hailea Water Pump HX88 Hailea HX88 - High-quality water pumps with high outputs that can move large amounts of liquid efficiently and effectively. ABS Plastic Casings that are Corrosion Resistant Mounted suction cups for easy positioning. It has a high-quality resin is used to create a sealed unit engineered for continuous use and has a high-quality, large-sized filter screen. The Hailea Submersible Water Pump: A fully submersible unit with a large screen filter that stops impurities from passing through and into the piping system. This reduces the chance of blockages and improves efficiency in hydroponic systems. When equipment fails or blocks occur, root systems can dry out. There is a

The FloodMate 4 is an emergency pumping kit for defending property from low level flooding. This set includes a petrol driven, 1.5HP pump (model TEM-25H, capable of up 80 litres per minute, through 25mm (1") hose, over 30 metres of level ground) All the contents are supplied in a sturdy, easy-to-carry case with lid, and the included pump is designed to operate constantly, pumping away minimal amounts of flood water down to a level of 3mm. The hoses are light, easy to position and feature quick connections to enable fast deployment in an emergency. Initial priming of the pump with water is required before starting. It will pump water down to 3mm, but it must not run dry and is deal for

This Clarke pump is ideal for a wide range of industrial and agricultural clean water applications. Not self-priming.

Ideal for a wide range of domestic, industrial and agricultural clean water applications. Not self-priming.

Genuine Honda petrol powered engine. This great petrol powered water pump can be used to drain pits pools, trenches and foundations as well as for field irrigation. This water pump can pump sand and solids in suspension up to 20mm in size. It includes hose connections and intake strainer, a silicon carbide seal and cast aluminium outer casing. This petrol powered water pump combines a Honda powered water pump with Clarke's great build quality. This results in a powerful, robust & heavy duty machine which is up for the job. The CHS2E handles clean water, brackish water and even the dirty water found on building sites, in farms yards and let over after flooding, making it more than

1" 230V Centrifugal Brass body water pump - A medium duty centrifugal water pump with a non-corrosive brass pump body and reliable 230V motor. It is ideal for a vast range of clean water pumping applications including emptying and filling ponds, pools and troughs Note – All electrical powered water pumps should be connected to the electrical supply via an earth leakage protection device or RCD

BOYU FP-6000 Adjustable Pump 6000L/hr The BOYU Liquid pumps are submersible and suitable for all hydroponic systems and nutrient solution pumping requirements.The shaft is non-corrosive and all line parts are sealed, waterproof and insulated.Disassembly and cleaning is easy thanks to the clever design. Max H - 5.2m Power - 105w Outlet - 25.4mm (1") 6000LPH