Pump Accessories

1¼" diameter layflat water hose, perfect for use on the delivery (outlet) side of submersible, centrifugal and surface mounted water pumps. Lightweight layflat hose is easy to move, store and requires no real installation (other than unrolling and laying). Unobtrusive too, it lies flat to the ground when not in use but outlet water pressure is sufficient to open it up to deliver pumped water to exactly where it's required. Please Note: - We cut the hose to the correct length to match your needs! This hose is sold in a maximum continuous length of 100m. Every 100m of hose bought will be supplied separately and will need couplers and clips to connect them together (sold separately)

Reinforced 1" diameter suction and delivery hose. Ideal for use with most kinds of mains electricity, petrol and diesel powered and PTO driven water pumps too. Reinforced hose can be used on both the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pumps. Hose is cut to length depending on your requirements. This hose is sold in a maximum continuous length of 30m. Every 30m of hose bought will be supplied separately and will need separately available couplers and clips to connect them together.

Reinforced 2" diameter suction and delivery hose. Ideal for use with most kinds of mains electricity, petrol & diesel powered and PTO driven water pumps too. Reinforced hose can be used on both the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pumps. Hose is cut to length depending on your requirements. This hose is sold in a maximum continuous length of 30m. Every 30m of hose bought will be supplied separately and will need separately available couplers and clips to connect them together.

Reinforced 3" diameter suction and delivery hose. Ideal for use with most kinds of mains electricity, petrol & diesel powered and PTO driven water pumps too. Reinforced hose can be used on both the suction and delivery sides of any surface mounted water pump, or the delivery side of a submersible pumps. Hose is cut to length to match your requirements. This hose is sold in a maximum continuous length of 30m. Every 30m of hose bought will be supplied separately and will need separately available couplers and clips to connect them together.

1½" diameter layflat water hose, perfect for use on the delivery (outlet) side of submersible, centrifugal and surface mounted water pumps. Lightweight layflat hose is easy to move, store and requires no real installation (other than unrolling and laying). Unobtrusive too, it lies flat to the ground when not in use but outlet water pressure is sufficient to open it up to deliver pumped water to exactly where it's required. Please Note: - We cut the hose to the correct length to match your needs! This hose is sold in a maximum continuous length of 100m. Every 100m of hose bought will be supplied separately and will need couplers and clips to connect them together (sold separately)…

Useful for accessing reusable Clic/Clic R type Hose clamps in normally inaccessible positions. Can be used at any angle and with swivel head for most awkward angle.

Hose clamp pliers with locking function & 35° angled head for tight areas. Equipped with waffle shaped jaws.

Multi-direction hose clip removal pliers suitable for use on awkwardly placed ring type and flat band style spring-loaded hose clamps and clips. The large capacity and wide circular opening allows for them to be used around a hose to undo the clamp without needing to force it around to somewhere that it can be easily accessed by regular hose clamp pliers.

Hose clamp removal pliers for use on ring type and flat band style spring loaded hose clamps and clips. Featuring a waffle design for improved grip, together with an axial type locking grip that allows for easy access to the hose clamp opening between tightly packed components in the engine bay whilst securely clamping it in the open position. The jaws are easy to adjust, through the use of a quick release button on the top of the pliers, and have a maximum opening of 65mm.

Hose clip fitting and removal pliers for clipless, spring loaded clips, including pre-opened spring band clamps.

A pair of CV boot clamp pliers designed for tightening the earless type CV boot clamps used on various Volkswagen group vehicles, including Audi and Skoda, together with various Mercedes-Benz and Toyota vehicles. The head has an integral stop so that the pliers can close enough to grip without cutting, making it easy to secure clips correctly, and the handles are vinyl dipped for grip and comfort.

A pair of spring-loaded air line disconnect pliers, designed specifically to depress the release buttons or locking tabs on 6mm Voss 214 quick connectors as used on HGV air brake systems on various Iveco vehicles. The spring-loaded handles and angled jaws allow for one-handed use and easy access in tight spaces, vinyl dipped for grip and comfort.

A pair of spring-loaded air line disconnect pliers, designed specifically to depress the release buttons or locking tabs on 8mm Voss 214 quick connectors as used on HGV air brake systems on various Iveco vehicles. The spring-loaded handles and angled jaws allow for one-handed use and easy access in tight spaces, vinyl dipped for grip and comfort.

A pair of spring-loaded air line disconnect pliers, designed specifically to depress the release buttons or locking tabs on 10mm Voss 214 quick connectors as used on HGV air brake systems on various Iveco vehicles. The spring-loaded handles and angled jaws allow for one-handed use and easy access in tight spaces, vinyl dipped for grip and comfort. Other sizes also available, please see part nos. 8961 (6mm), 8962 (8mm), 8964 (12mm).

A pair of spring-loaded air line disconnect pliers, designed specifically to depress the release buttons or locking tabs on Ø12mm Voss 214 quick connectors as used on HGV air brake systems on various Iveco vehicles. The spring-loaded handles and angled jaws allow for one-handed use and easy access in tight spaces, vinyl dipped for grip and comfort.

These Flexible Long Reach Hose Clamp Pliers feature a locking mechanism which is designed to hold the hose clamp in the open position, whilst the flexible cable and compact head allows access in hard to reach places.

QuickStop flow regulators are designed as a replacement to conventional ballcock valves in water tanks, helping to protect booster pumps. They have high-speed opening and closing of the integral valve for more efficient and effective regulation of flow. These advanced models are fully adjustable, so sensitivity and activation levels can be altered by changing the angle of the swivel joint and the length of the float-arm. In addition to use with a pump, they are also suitable for a gravity fed system. These flow regulators are also constructed with polycarbonate and stainless steel, for operation in liquids up to 50°C at a working pressures of between 0.2 and 6 bar.

Constructed in heavy duty 25.4mm x 1.5mm electrically seam welded steel tube with a spray paint finish. Supplied with: 270mm x 50mm solid rubber wheels, 25mm solid steel axle, rubber handle grips, push-on axle caps and stainless steel fixings.

Constructed in heavy duty 25.4mm x 1.5mm electrically seam welded steel tube with a spray paint finish. Supplied with: 270mm x 50mm solid rubber wheels, 25mm solid steel axle, rubber handle grips, push-on axle caps and stainless steel fixings.

PVC layflat water discharge hose

PVC suction & discharge water hose

This residue plate kit will convert HS2.4S to a puddle pump, to pump water right down to 10mm. Steel coated with rubber, it is easy to fit and take off.

This is a 170mm extension kit for use with Tsurumi pumps fitted with Low Level Sensor Switch.

This is a 70mm extension kit for use with Tsurumi Pumps fitted with Low Level Sensor Switch.