Garden Sprayers

Our flagship mini HVLP Gravity feed compliant spray gun, giving excellent build quality at a very affordable price. Just right for SMART touch-up paint repairs and perfect for alloy wheel painting. Stainless steel inside components, so suitable for use with water and solvent-based paints. Can be used with 3M disposable pot system. Use adaptor number 21 (3M code 16105). 0.8mm set up = 43PSI pressure / 9CFM 125mm plastic pot (FMT3600P) Ergonomically designed handle A wide spray pattern with excellent atomisation

Our flagship mini HVLP Gravity feed compliant spray gun, giving excellent build quality at a very affordable price. Just right for SMART touch-up paint repairs and perfect for alloy wheel painting. Stainless steel inside components, so suitable for use with water and solvent-based paints. Can be used with 3M disposable pot system. Use adaptor number 21 (3M code 16105). 0.8mm set up = 43PSI pressure / 9CFM 125mm plastic pot (FMT3600P) Ergonomically designed handle A wide spray pattern with excellent atomisation

Twin magnetic gravity spray gun holder featuring 2 x strong magnets. Suitable for mini and regular sized gravity spray guns. Size 250mm x 155mm

Our top selling LVLP (low volume low pressure) high transfer efficiency gravity feed top coat spraygun. Suitable for water and solvent based paints. Operates with a very low air consumption, just 4.2-6cfm depending on the setup specified. Ideal for those with smaller compressors. Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032). Colour coded for easy setup identification. A well balanced and high performing gun.

Our flagship LVLP Gravity feed spray gun, this gun is made to the highest of standards and will enable the sprayer to achieve very high-quality paintwork LVLP means less air at a less pressure so less overspray and more eco-friendly and more cost effective. HVLP performance with fewer air requirements Very low overspray levels Automotive, industrial, joinery and other painters with smaller compressors. Can achieve totally professional results, painting a whole car or large surface without stopping. LVLP is ideal for smart repairers due to smaller air requirements and low overspray The secret of LVLP technology is the precision air-cap design allowing maximum atomization using a lower volume

Our top selling LVLP (low volume low pressure) high transfer efficiency gravity feed top coat spraygun. Suitable for water and solvent based paints. Operates with a very low air consumption, just 4.2-6cfm depending on the setup specified. Ideal for those with smaller compressors. Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032). Colour coded for easy setup identification. A well balanced and high performing gun.

Our flagship LVLP Gravity feed spray gun, this gun is made to the highest of standards and will enable the sprayer to achieve very high-quality paintwork LVLP means less air at a less pressure so less overspray and more eco-friendly and more cost effective. HVLP performance with fewer air requirements Very low overspray levels Automotive, industrial, joinery and other painters with smaller compressors. Can achieve totally professional results, painting a whole car or large surface without stopping. LVLP is ideal for smart repairers due to smaller air requirements and low overspray The secret of LVLP technology is the precision air-cap design allowing maximum atomization using a lower volume

Our top selling LVLP (low volume low pressure) high transfer efficiency gravity feed top coat spraygun. Suitable for water and solvent based paints. Operates with a very low air consumption, just 4.2-6cfm depending on the setup specified. Ideal for those with smaller compressors. Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032). Colour coded for easy setup identification. A well balanced and high performing gun.

Will accept disposable pot systems. Available in 1.4mm Set Up 600ml Pot Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032) Suitable for water based paints Working Pressure: 2BAR/20-28PSI Air Consumption: 270L/min Air Inlet: 1/4" Paint Pot Thread: M16 1.5p Weight 450g Pattern Width: 300mm Stainless Steel Fluid Nozzle

Will accept disposable pot systems. Available in 1.3mm Set Up Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032) Suitable for water based paints 600ml Pot Working Pressure: 2BAR/20-28PSI Air Consumption: 270L/min Air Inlet: 1/4" Paint Pot Thread: M16 1.5p Weight 450g Pattern Width: 300mm Stainless Steel Fluid Nozzle

Will accept disposable pot systems. 1.2mm Set Up 600ml Pot Can be used with 3M disposable pot system, use adaptor number 2 (3M code 16032) Suitable for water based paints Working Pressure: 2BAR/20-28PSI Air Consumption: 270L/min Air Inlet: 1/4" Paint Pot Thread: M16 1.5p Weight 450g Pattern Width: 300mm Stainless Steel Fluid Nozzle

Venturi Hand held water based paint drying gun. This gun increases the airflow from the compressor by around 15% which speeds up drying times. The air is filtered to a high degree, eliminating any risk of imperfections in the paintwork. Working Pressure 43-7psi/3-5BAR Air Consumption 12.3CFM Air Inlet 1/4 Max Pressure 100psi/7BAR Replacement Guaze - AIR450/1 Replacement Filter Retaining Ring - AIR450/2

Use these filters to prevent muck and other particles from entering the gun and affecting the paintwork. Size 10mm diameter Length 35mm Pack of 10 filters

Conventional 1000ml steel pot suction gun. Tough and durable and gives excellent performance. Ideal for painting large areas, Also available in 1.3mm, 1.4mm, 1.6mm, 1.7mm, 2.0mm and 2.5mm Set Ups Not suitable for waterbased paints.

Conventional 1000ml steel pot suction gun. Tough and durable and gives excellent performance. Ideal for painting large areas, Also available in 1.3mm, 1.4mm, 1.6mm, 1.7mm, 2.0mm and 2.5mm Set Ups Not suitable for waterbased paints.

Conventional 1000ml steel pot suction gun. Tough and durable and gives excellent performance. Ideal for painting large areas, Also available in 1.3mm, 1.4mm, 1.6mm, 1.7mm, 2.0mm and 2.5mm Set Ups Not suitable for waterbased paints.

Conventional 1000ml steel pot suction gun. Tough and durable and gives excellent performance. Ideal for painting large areas, Also available in 1.3mm, 1.4mm, 1.6mm, 1.7mm, 2.0mm and 2.5mm Set Ups Not suitable for waterbased paints.

Conventional 1000ml steel pot suction gun. Tough and durable and gives excellent performance. Ideal for painting large areas, Also available in 1.3mm, 1.4mm, 1.6mm, 1.7mm, 2.0mm and 2.5mm Set Ups Not suitable for waterbased paints.

Conventional 1000ml steel pot suction gun. Tough and durable and gives excellent performance. Ideal for painting large areas, Also available in 1.3mm, 1.4mm, 1.6mm, 1.7mm, 2.0mm and 2.5mm Set Ups Not suitable for waterbased paints.

Conventional 1000ml steel pot suction gun. Tough and durable and gives excellent performance. Ideal for painting large areas, Also available in 1.3mm, 1.4mm, 1.6mm, 1.7mm, 2.0mm and 2.5mm Set Ups Not suitable for waterbased paints.

Designed and built for tough work, you won't get a better gun for primer work than the FMT4001G. Suitable for solvent based paints only and available in a large range of setups: 1.3, 1.4, 1.6, 1.8, 2.0 or 2.5mm. Can be used with 3M disposable pot system use adaptor number 2 (3M code 16032).

Designed and built for tough work, you won't get a better gun for primer work than the FMT4001G. Suitable for solvent based paints only and available in a large range of setups: 1.3, 1.4, 1.6, 1.8, 2.0 or 2.5mm. Can be used with 3M disposable pot system use adaptor number 2 (3M code 16032).

Designed and built for tough work, you won't get a better gun for primer work than the FMT4001G. Suitable for solvent based paints only and available in a large range of setups: 1.3, 1.4, 1.6, 1.8, 2.0 or 2.5mm. Can be used with 3M disposable pot system use adaptor number 2 (3M code 16032).

Designed and built for tough work, you won't get a better gun for primer work than the FMT4001G. Suitable for solvent based paints only and available in a large range of setups: 1.3, 1.4, 1.6, 1.8, 2.0 or 2.5mm. Can be used with 3M disposable pot system use adaptor number 2 (3M code 16032).