Soldering Tools Laser Tools

Cordless 30w soldering iron with rechargeable Li-ion battery (2400mAh). Supplied cone tip, chisel tip, heat shrink tip, 15g solder, cleaning sponge, stand, cap & USB charging cable. Charging time 3-5 hours; one charge provides 35 mins of use.LED illumination. Reaches working temperature 180C (365F) in 10 seconds. Max. temperature up to 600C (1112F). Internal charging board protects against overcharging, short circuit and Electro Static Discharge.

A light and compact butane gas powered torch with piezo electric ignition. It features a safety lock, to prevent accidental ignition, together with a flame lock to allow for continuous use. The refillable gas tank has a 12ml capacity, giving it run time of 20 30 minutes and a maximum temperature of 1300C. Suitable for use at the workshop, at home and in the garden, for a wide range of tasksMini blow torch, with refillable tank, ideal for a wide range of jobs including heating small components for removal & soldering components where a soldering iron cannot be used.Safety lock & flame lock (for continuous use); 20 - 30 mins run time (approx).Dimensions: 102 x 68 x 35mm.Dimensions: 102 x 68 x …

A mains powered soldering iron 80w featuring an easy to read digital temperature gauge with a thermostatic control allowing the temperature to be adjusted between 100C - 480C. It comes supplied with 5 interchangeable soldering tips, 30g of solder and a safety stand with integral cleaning sponge. Suitable for use in the workshop and around the home and is ideal for automotive technicians, electricians, jewellers, modellers, hobbyists & DIY.Mains-powered 80w soldering iron, fitted with a 1.2m lead & 230V 13 amp 3 pin BS plug.Supplied with 5 soldering tips, 30g solder, cleaning sponge & safety stand.Features a digital screen with adjustable temperature control.Temperature range: 100C - 480C (212F …

A 15w cordless soldering iron with inbuilt LED, making it ideal for use in dimly lit areas such as engine bays and vehicle interiors. It features a cone shaped soldering tip, is powered by 4 x AA batteries, has a run time of approximately 30 minutes, reaches it's working temperature in 7 seconds, and has a maximum operating temperature of 550C. It also comes supplied with a 30w heat shrinking tip, which has a run time of 15 minutes and has a maximum operating temperature of 400C. Suitable for use in the workshop and around the home and is ideal for automotive technicians, electricians, jewellers, modellers, hobbyists and DIY.Battery powered 15 watt soldering iron. Use 4 x AA batteries (not supplied).…

A 15w cordless soldering iron with inbuilt LED, making it ideal for use in dimly lit areas such as engine bays and vehicle interiors. It features a cone shaped tip, is powered by 4 x AA batteries, has a run time of approximately 1/2 an hour, reaches its working temperature in 7 seconds and has a maximum operating temperature of 550C. Suitable for use in the workshop and around the home and is ideal for automotive technicians, electricians, jewellers, modellers, hobbyists and DIY.Battery powered 15 watt soldering iron. Use 4 x AA batteries (not supplied). For best results use rechargeable Ni-MH batteries.Continuous run time 30 minutes (approx). Reaches working temperature in 7 seconds. Max. temperature …

Earth bonding point for use with an ESD anti-static service mat, allows for the earth lead (or grounding cord) to be attatched easliy and safely to the mains earth via a standard UK plug socket.Earth bonding point with 1 Megohm resistance.For use with Laser Anti-Static Service Mat Kit (Part No. 8285).Features 2 x 4mm socket, 1 x 10mm stud.

Designed to allow the safe removal, fitting and timing of the gear driven balance shaft on the Jaguar Land Rover AJ200 2.0L diesel engines. The kit contains all the essential components to enable the balance shafts to be aligned when reassembling the components. NOTE: For camshaft timing, Laser recommend the use of Part No. 7430 timing tool kit, available separately.Cordless 8 watt soldering iron with rechargeable Li-ion battery (1800mAh). Battery level indicators allow easy identification of charging requirements.Supplied with safety stand, cleaning sponge, 2 x lead free solder coils (approx. 1mm dia x 80cm long, weight 5g), 1m USB to USB-C charging cable. Soldering iron features a built in …

USB 3D print finishing tool works with most 3D print material and can also be used with other equipment for plastic bumper repairSupplied with a 1.2m USB lead and powered by standard USB socket (1 Amp current draw)Heats up to 185C in approx 15 secondsMax temp 400CFolding stand included

Supplied with safety stand, 1m USB cable to Micro USB cable and LED light. 12 watt, charging time 3.5 hours, run time approx 90 minutes. Maximum temperature 932F. Reaches working temperature 356F in 10 seconds, charging protection.

Genuine Laser Tools 6731 Soldering Iron 40 watt - Euro Plug

40 watt soldering iron40 watt soldering iron non slip handle tip 5mm1.2m (approx) cable Approved 240v 3 pin plugMetal standManufactured to BS EN60335-2-45 SPEC CE/GS/ROHS approved

25 watt soldering iron25 watt soldering iron with non slip handle TIP SIZE 4MM1.2 meters (approx)of cableApproved 240v 3 pin plugMetal standManufactured to BS EN60335-2-45 SPEC CE/GS/ROHS approved

A robust butane heating torch with a temperature of 1300C burner.Adjustable burner with maximum of 1300C.Piezo electric ignition.For heating and soldering. Ideal for use with Laser Part No.4707 Aluminium Repair System.CE approved.Accepts standard self sealing threaded butane gas cartridges (not included).

Butane powered soldering iron with soldering tip. Features include: adjustable heating control and integral stand.Butane powered.Soldering tip.Adjustable heat control.Integral stand.0

Butane powered, hand held torch with piezo electric ignition and adjustable heating control. Suitable for heating and shrinking.Butane powered, piezo ignition.Adjustable heat control.Suitable for heating and shrinking.Portable.Storage case and sponge complete the set.

60 Watt soldering iron with standard BS plug.Standard BS plug.240 volt.60 Watt.RoSH compliant.CE certificated.

Ideal multi-purpose tool for flame welding, brazing, soldering, hot air shrinking and hot cutting of plastic etc. 11 piece kit comes with an electric ignition system. Child resistant safety lock which has U.S. CPSC approval. Ideal multi-purpose tool for flame welding, brazing, soldering, hot air shrinking and hot cutting of plastic. Electronic ignition system, child safety lock and automatic shut-off. Soldering temp 500C. Flame welding up to 1300C . Working time 60 minutes. GS certificated.

The soldering tool is lightweight, cordless and refillable from any butane gas canister, with integral stand for cooling periods.The soldering tool is lightweight, cordless with integral stand for cooling periods.Solder tip sizes include 3.4 and 4.6mm.Needle tip and hot knife tip with tip adaptor.Refillable from a standard gas canister.Storage case and sponge complete the set.

Handy soldering kit complete with torch stand. Includes blow torch attachment, soldering tip and solder.Handy soldering kit complete with torch stand.Includes blow torch attachment Butane powered.Soldering tip and solder.Torch temp 1300C.GS certificated.