Equipment Accessories

The large capacity Clarke COP8 8 litre oil drain pan is manufactured from tough durable plastic and is suitable for use with antifreeze and oil making it ideal for use in garages or workshops. This useful product is designed as wide pan with grooved handles and a spout for clean disposal, avoiding unnecessary spillage when being emptied. The full range of Clarke Oil Drain Pans come provided with a 12-Month Manufacturer's Warranty.

Heavy duty steel constructed sandblaster for the quick removal of surface rust, paint, dirt/grease etc. Pressurised design gives greater power than its siphon fed equivalent and has the facility to control the sand and the outlet air flow.

Compact and lightweight ideal for removing paint, rust, dirt/grease, burrs from metals and marks from brick & stone. Durable moulded casing with convenient carry handle and integral hose storage. 23kg tank capacity. Long 14ft 7" grit hose. Includes a sandblasting gun and delivery hose.

Heavy duty steel constructed sandblaster for the quick removal of surface rust, paint, dirt/grease etc. Pressurised design gives greater power than its siphon fed equivalent and has the facility to control the sand and the outlet air flow.

The Clarke OD12 Portable Oil / Fluid drainage container is shaped with a large concave design to allow the capture of up to 12 litres of used engine oil, brake or clutch fluid without the risk of leaking. The strong durable plastic construction allows this drain to be resistant to most oils, coolants and chemicals. Simply slide the drain container under your sump prior to removing the drain plug. Egonically designed with with moulded handles and large evacuation spout providing a safe, easy and mess free method of disposal, this simple, yet effective tool is a must have in any automotive workshop or garage.A real time and effort saving fluid drainage solution suitable for garage service or maintenance …

Connects directly to the inlet of an air tool or spray gun providing a convenient and accurate way of regulating input pressure.

This handy grit blaster gun fires dry abrasive particles at high speed, quickly removing rust, scale, old paint etc. Ideal for cleaning pitted surfaces, crevices and other hard to reach places.

The swivelling hose reel enables hose extension at any angle, and quick retraction. Specifications Max Pressure: 15 Bar Length: 30 m

5 m Professional Rubber Air Line Hose Ideal for use with the XR FLEXVOLT air compressor DCC1054

Contact tips for use with MB15 MIG welding torches. Manufactured from high conductivity copper alloy. Pack of 5.PTDDRPDIR98454

Contact tips for use with MB15 MIG welding torches. Manufactured from high conductivity copper alloy. Pack of 5.PTDDRPDIR98456

This Dinse-type adaptor enables a 35-50 accessory to be used in a 10-25 welder socket.PTDDRPDIR20933

Fitted with swivel nut connectors at either end.PTDDRPDIR35026

Fitted with swivel nut connectors at either end.PTDDRPDIR35028

Regulator suitable for use with disposable gas bottles with Draper gas MIG welders TIG welders and other manufacturers gas welders.PTDDRPDIR44352

Regulator suitable for use with disposable CO2 gas bottles. Fitted with bullnose connector for use with Draper gas MIG welders TIG welders and other manufacturers' gas welders. Includes single gauge.PTDDRPDIR70135

This Compact Air Regulator Is Designed For Use With Air Tools. It Is Fitted With A Standard 1/4 Bsp Thread Which Is Suitable For Most Pneumatic Tools. The 33Mm Diameter Pressure Gauge Is Dual Marked With Psi And Bar. It Is Lightweight And Easy To Install And Maintain For Use.PTDDRPDIR28377"

This Compact Air Regulator Is Designed For Use With Air Tools. It Is Fitted With A Standard 1/4 Bsp Thread Which Is Suitable For Most Pneumatic Tools. The 41Mm Diameter Pressure Gauge Is Dual Marked With Psi And Bar. It Is Lightweight And Easy To Install And Maintain For Use.PTDDRPDIR28379"

Air tool connection kit consisting of high pressure PVC hose PCL coupling set and female coupling.PTDDRPDIR64503

Collets and collet bodies hold and position the tungsten electrode in a TIG torch body. The 1.6mm collet bodies in this pack of three are for use with the Dinse Type 35–50 Air Cooled TIG Welding Torch 4m (Stock No. 70087) and the TIG Welding Torch for All Draper Inverter/Welders (Stock No. 57096).PTDDRPDIR98451

Set of two spot weld cutters to drill out welds on body panels. Pilot drill ensures accurate cut. Cutters screw onto hexagon shank and are reversible for extra long life. Shank size 7mm.PTDDRPDIR57624

Single stage with two gauges one showing output pressure and the other bottle contents. 3/8 BSP outlet 5/8" BSP inlet connections.PTDDRPDIR35017"

Large gas bottle regulator with single gauge and bottle connection for Argon/CO2. Supplied with tail nut and nipple for attachment of 6mm hose. Fitted with bullnose connector.PTDDRPDIR70151

Single stage with two gauges one showing output pressure and the other bottle contents. 3/8 BSP outlet 5/8" BSP inlet connections.PTDDRPDIR35010"