Routers & Trimmers

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 58

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 8 • Dia Imperial: 5/16 • Cut Length Metric: 19 • Overall Length Metric: 52

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 8 • Dia Imperial: 5/16 • Cut Length Metric: 19 • Overall Length Metric: 65

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 8 • Dia Imperial: 5/16 • Cut Length Metric: 25 • Overall Length Metric: 69

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 6 • Dia Imperial: 15/64 • Cut Length Metric: 16 • Overall Length Metric: 69

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6 • Cut Length Metric: 25 • Overall Length Metric: 57

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 6 • Cut Length Metric: 25 • Overall Length Metric: 65

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6 • Dia Imperial: 15/64 • Cut Length Metric: 16 • Overall Length Metric: 59

Trend 3/20X1/4TC TCT Two Flute Router Cutter 6.3mm x 16mm The Trend 3/20X1/4TC TCT router cutters are perfect for use on abrasive materials such as chipboard, MDF & plywood. The two flutes give a clean finish to cut edges and the tungsten carbide tips ensure long life and maximum durability. Features:
- Designed for the most abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics
- Two flutes give a clean finish to cut edges
- For routing and profiling natural timbers and man-made boards
- Suitable for most makes of router Specification:
- D: 1/4 inch
- D: 6.3 mm
- C: 16 mm
- OL: 47 mm
- Shank Diameter: 1/4 inch…

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 11 • Overall Length Metric: 44

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Dia Imperial: 13/64 • Cut Length Metric: 16 • Overall Length Metric: 69

Trend Craft Pro Dovetail Cutters are designed for use with commercial dovetailing and stair housing jigs. They are also used to produce sliding and lapped dovetails, through dovetails and end on dovetails. Suitable for use on natural timbers and man-made boards.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 11 • Overall Length Metric: 59

This thirty-piece cutter set contains a range of popular Tungsten Carbide Tipped cutters for a variety of applications. 1/4-inch shank diameter. For softwood, hardwood, chipboard, plywood and MDF. Excellent value for money. Set includes fifteen guided and fifteen unguided router cutters. Supplied in aluminium carry case. Specifications: • Shank Diameter: 1/4 • Pack Qty: 30 piece Contents: 1 x Straight 5mm x 12mm cut 1 x Straight 6mm x 20mm cut 1 x Straight 8mm x 20mm cut 1 x Straight 10mm x 20mm cut 1 x Straight 12mm x 20mm cut 1 x Straight 14mm x 20mm cut 1 x Straight 16mm x 20mm cut 1 x Straight 18mm x 20mm cut 1 x Straight 20mm x 20mm cut 1 x 45 Degree v groove x 12.7mm …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 68

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 55

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3 • Cut Length Metric: 11 • Overall Length Metric: 59

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.7 • Dia Imperial: 3/16 • Cut Length Metric: 11 • Overall Length Metric: 51

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.5 • Cut Length Metric: 11 • Overall Length Metric: 51

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19 • Overall Length Metric: 61

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4 • Dia Imperial: 5/32 • Cut Length Metric: 11 • Overall Length Metric: 65

This versatile double-ended bit removes damaged screws, machine screws and broken bolts from wood, metal and plastic. It can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8. Removes cleanly from wood, metal or plastic. Made from High Speed Steel. Removes screws made of any alloy including soft brass. Removes free spinning screws. Winslow tip for self centring. Double-ended (burnisher & tapered thread). Serrated extracting end of tool results in greater torque for hard to remove screws. Hex shoulder to aid removal of jammed screw or bolt. Set of two bits, sizes No.2 and No.3.Specifications:• Screw sizes=No.6 to No.14• Screws sizes=3.5 mm to 5 mm• Bolt sizes=M4 …

Experience the power and precision of the JCB 18V Brushless Trimmer Router. With advanced brushless motor technology, this trimmer router delivers exceptional performance and durability. Its variable speed control with soft start ensures precise control and consistent application across various materials, making it perfect for any woodworking project. Enhanced Visibility and SafetyEquipped with a built-in LED light, this trimmer router provides improved visibility, allowing you to work with precision even in dimly lit areas. The lock on/off switch adds an extra layer of safety, ensuring worry-free operation. Efficient Dust ExtractionSay goodbye to messy workspaces! The JCB 18V Trimmer Router …