Routers & Trimmers

Plunge-cutting straight Bits with shank mounted (top) bearing pilot. This type of flush trim bits is designed for template / pattern routing from simple cuts to complex curves. The bearing has the same Diameter as the cutter and it enables following pre-shaped templates and forming an exact duplicate of the template. Ideal for producing identical parts when needed.

Two Flute Classical Plunging Bits Flat bottom.

Two Flute Beading Bits with ball bearing guide. Tool will produce an ovolo mould to window frames, sashes and glazing bars. Cabinet doors and frames, trophy plaques/plinths, shelves, etc. Self guiding with ball bearing.

18V Trimmer Router with Brushless Motor Technology. 25% more power – Brushless motors have fewer moving parts results in a quiet motor that never needs maintenance. The reduced friction enables a better use of available energy from the battery pack as there is no resistance from brushes. 50% more run time – Brushless motor technology means the carbon brush resistance is eliminated, so less battery energy is wasted. The efficiency of a brushless motor results in a greater run time from each charge. Variable speed with soft start for control and consistent application into a variety of materials.. Vacuum adaptor included for dust extraction. Lock on/off switch for added safety.

Can be used on both inside and outside doors, and on maximum 25mm thick fixed stops.

A two-part aluminium hinge jig portable template set designed for recessing hinges in wooden doors & frames. It is easy to use with minimal setting-up time, completing the job both accurately & quickly. Used on-site & in joinery shops to increase productivity with excellent results.

M12v2 Variable speed motor with constant speed control with a convenient variable speed dial on side handle. Fan design offers increased cutting efficiency to rout smoothly through hardwoods. Plunge depth: 65mm.

This light speed saw can be used for cutting a variety of materials, such as plasterboard, sound-absorbing ceiling tiles and plywood. It has also been specially designed for lowering fatigue during use, which is helped by the ergonomic grip and light weight of 0.8kg. 2 Kind of Bits Included: 1/8" and 1/4" for a variety of cutting applications. Bare Unit - Use with your existing Greenworks 24V/48V batteries and charger. Click to see the whole Greenworks 24V/48V range.

GRAB/SE1/SET GRABIT REMOVER SET

Round sub base can be used as a guide itself. Supplied with- 10 mm guide bush, 1/4in and 1/2in shank line up pin and bush and fixing screws. Will fit- DEWALT DW620, 621, 624, 625EK, 629, Elu OF97(E), MOF131, 177(E), Bosch GOF1600A 1700ACE and Makita RP0910, 0111C and B & Q CLM2050R, 1250R, 11/03.

A solid laminate sub base which is suitable for the Triton TRB001 and MOF001 routers. Diameter 170 mm Thickness 8 mm This product includes: 1 x Sub base 1 x Template Guide Bush 1 x 1/2" Line-up pin 1 x 1/4" Line-up pin

GB30 GUIDE BUSH 30MM DIA E44184

GB18 GUIDE BUSH 18MM DIA E44178

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template. Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter 16mm Inside diameter 14mm Projection from plate 10mm

GB160 GUIDE BUSH 16MM DIA

GB12 GUIDE BUSH 12MM DIA E44175

GAUGE/D60 DIGITAL DEPTH GAUGE

GAUGE/1 DEPTH GAUGE

FTS/S/R FAST TRACK REPLACEMENT ROUGHING STONE 90-120G SILVER

FTS/KIT FAST TRACK PORTABLE SHARPENER

The FSN RA 32 800 allows for accurate repeated hole layouts during furniture construction.

The FSN RA 32 1600 allows for accurate repeated hole layouts during furniture construction.

This non-slip strip ensures better grip of the guide rail on the workpiece.

FOLDING FLUSH CUT SAW 120MM (4.3/4IN) 22TPI