Routers & Trimmers Trend

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 19 • Overall Length Metric: 51

Holds door on its edge while routing hinge recess & mortise for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32mm to 55mm thick. Allows door to be tilted back to assist fitting into frame. Maximum door weight 58kg.

Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate for larger locks quickly & accurately. Supplied with templates to suit most common sash mortises and dead locks Minimal set up time and easy to use Fast, clean results on 34mm to 58mm thick doors Supplied with 12 face plate templates and 4 mortise plate templlates

Trend C030X1/4TC CraftPro Two Flute Cutter 19.1mm Diameter x  25.4mm Cut
The Trend C030X1/4TC has a microgranular TC tip ensuring the perfect sharpness. It has a diameter of 19.1mm, 1/4 inch shank and a working depth of 25.4mm.Features:
- VERSATILE 2-FLUTE STRAIGHT CUTTERS: Designed for multiple routing tasks like edge trimming, grooving, and rebating; delivers high-quality finishes at slower feed speeds due to limited waste clearance
- TUNGSTEN CARBIDE TIPPED: 2.0mm micro-granular extra-hard tips for prolonged sharpness and cutter durability. Ideal for cutting softwood, hardwood, and man-made timber boards
- PTFE NON-STICK COATING: Its PTFE non-stick coating reduces friction, minimises re…

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/4 • Dia Metric: 18.7 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 60 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 3

Single Flute Helical For drilling slotting, cutting aluminium anodised duralium and UPVC. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining abrasive anodised finishes. *6mm shank.

7/01 1/4" TC Panel Mouldc Utter by Trend