Pliers, Wire Cutters & Cable Cutters

FEATURES:- Suitable for permanent use- Low power consumption and high cutting performance thanks to optimally matched cutting angle and transmission ratio- For all wire types including piano wire

Bahco End Cutter Fencing Pliers which are phosphated, anti-corrosion treated and have a cutting capacity on iron wire up to 2.5mm maximum. Made from chrome vanadium steel with plastic coated handles.

Knipex 99 14 300 High Leverage Concreters Nippers 300mm The Knipex 9914300 concreters nippers offer high leverage transmission for the most demanding applications. They require 25% less effort compared to conventional concreters' nippers of the same size and are zinc plated for excellent corrosion resistance and long life. They are typically suited to cutting different types of wire and do so with ease. Sold loose. Features:
- 25% less effort required compared to conventional concreters' nippers of the same size
- Extra-slim form for tying deep mounted steel rods
- To lace concrete reinforcing steel with binding wire from a roll
- The wire is twisted and cut in a single pass
- High-leverage …

Knipex 87 01 250 SB Cobra Hightech Water Pump Pliers 250mm The Knipex 8701250SB waterpump Pliers are 250mm in length with chrome vanadium multi-stage oil-hardened jaws and rubber-coated handles for added grip and comfort. No more time-consuming presetting of the required opening size. Just position the upper jaw to the workpiece, push button and move close the lower jaw, ingeniously simple. Teeth set against the direction of rotation have a self-locking effect and prevent slipping on the workpiece. The Knipex 8701250SB come attached to a card with a hanging hook for display purposes, the Knipex 8701250 are the same Pliers sold loose. Features:
- Guard prevents operators' fingers being pinched …

Expert Quality, manufactured from chrome nickel steel hardened and tempered with two hardened cutting zones - one for fine cable and the other for 6mm cable. Polished head with lacquered finish. Special non slip cushion - grip handles. Display packed.

Expert quality XP1000®, manufactured from premium steel forged in Germany. Induction-hardened jaws provide ultimate effortless clean cutting and long-term performance. The off-centred precision-machined pivot pins not only allow a smooth one-handed operation and minimum play for ease of use, but increases the ease of cutting harder wires. Two part bi-material ergonomic soft grip handle allows maximum grip and user comfort, and horns prevent slipping onto live conductors. Tested to 10,000V, these pliers are suitable for working on live circuits of 1,000V AC and 1,500V DC.

Construction Worker
220mm
Easy to Use

Essential when replacing or repairing automotive/marine battery cables, this tool provides secure crimping when used in conjunction with a hammer or vice. Manufactured from laminated and hardened steel. Display packed.

The Insulated Cable Croppers for cutting aluminium and copper cables only. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 200mm (8in).Additional Information:• Length: 200mm

49 21 A01 SB Precision Circlip Pliersheavy duty in continuous operation: up to 10 times longer service life compared to turned tips. With inserted tips for reliable work. Large contact faces on the tips: no distortion of circlips, easy fitting. Bolted joint: precise, zero backlash operation of pliers. Internal opening spring, protected and captive. Non-slip plastic coating on the handles. angled tips. self-service card/blister. Size of shaft: Ø 3 – 10 mmTips (diameter): 0.9 mm

26 22 200 SNIPE NOSE SIDE CUTTINGPLIERS 200mm by Knipex

Spare bolt cutter jaws for Draper stock No.54267 bolt cutter.1 x Bolt Cutter Jaws for 54267 600mm Bolt Cutter

Professional Quality, manufactured from vanadium electric steel, oil hardened and tempered. Swedish pattern with smoothly ground and separately induction hardened cutting edges to 62HRC. Will cut hard, medium-hard and soft wires. Plastic coated handles. Display packed.Manufactured to DIN ISO 5749 Specifications

Expert quality XP1000®, manufactured from premium steel forged in Germany. Induction-hardened jaws provide ultimate effortless clean cutting and long-term performance. The off-centred, precision-machined pivot pins not only allow smooth one-handed operation with minimum play for ease of use, but also increase the ease of cutting harder wires. A two-part bi-material ergonomic soft grip handle allows maximum grip and user comfort, and horns prevent slipping onto live conductors. Tested to 10,000V, these pliers are suitable for working on live circuits of 1,000V AC and 1,500V DC. The handle also incorporates a tethered fixing solution to comply with Work at Height Regulations (lanyard Stock …

Replacement centre cut high tensile jaws for Faithfull bolt cutter. The jaws are easily adjustable to allow for wear, or when cutting different shaped sections of metal. Note: It is advisable to position the workpiece as far back in the jaws as possible when cutting metal.The Faithfull FAIBCJ24N replacement clipper cut jaws are to fit the Faithfull 610mm (24 inch) bolt cutter.Additional Information:• Size: 610mm (24in)

Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material like copper wire and plastic insulated wire at the tip. Comprised of high-performance alloy steel, ERGO handles and a black oxidised, anti-corrosion treated finish. The distance from the joint to the cutting edges has been reduced to enable better leverage and accessibility when cutting. Features and Benefits Bi-material grip provides the user with superior comfort, control and grip ERGO process ensures comfort, safety and quality of the tool Versatile due to the ability of the tool to cut Cu, Fe+ and piano wire Phosphated finish bolsters resistance to corrosion …

Side cutting plier with progressive edges designed to cut hard material such as piano wire close to the joint and to cut softer material as copper wire and plastic insulated wire at the tip. High performance alloy steel, ERGO handles with 2-component combination, thermoplastic surface on tough polypropylene which gives superior grip. ISO: 5749 DIN: 5749. Finish: black oxidised, anti-corrosion treated.

The Cobra Hightech range from Knipex is designed to save you time without compromising on quality. Each wrench is designed to autolock to your desired capacity by simply positioning the upper jaw to the workpiece, pushing the button and moving the lower jaw to the close position. Available in a range of sizes, each product is manufactured from durable chrome vanadium steel and possesses ergonomic, comfort handles. Features and Benefits Ergonomically designed handle with optimum width for complete user comfort and grip when using Simple adjustments can be made to suit your specific application; simply push the button for adjustment on the workpiece Possesses a self-locking on pipes and nuts: …

Knipex Cobra Water Pump Pliers Available in 125mm, 150mm, 180mm, 250mm, 300mm and 400mm (XL) Lengths KNIPEX Cobra® - the Hightech Water Pump Pliers. No more time-consuming presetting of the required opening size. Just position the upper jaw to the workpiece, push button and move close the lower jaw, ingeniously simple. The KNIPEX Cobra® XL offers the performance and comfort of water pump pliers while being lighter in weight and having a greater gripping capacity than comparable pipe wrenches. Greater gripping capacity but much lower weight than comparable pipe wrenches Fast push-button adjustment directly on the workpiece, no unintentional slipping of the joint Fine adjustment fo…

The Monument Japanese Spring Water Pump Pliers are exceptionally high-quality and versatile utility forged pliers. They are designed specifically to grip objects common in the plumbing and heating environment, including compression fittings, copper and iron pipes, and sanitary fittings. They have a 'Spring Return' design that helps to open the pliers and allows for precise control, even when wearing gloves. The high-carbon heat-treated teeth prevent slipping and are longer lasting. Fitted with anti-slip coated handles that provide an excellent grip. Made in Japan.These Monument Japanese Spring Water Pump Pliers have the following specification: Length: 195mmCapacity: 33mmAdditional Information:• …

49 21 A21 SB Precision Circlip Pliersheavy duty in continuous operation: up to 10 times longer service life compared to turned tips. With inserted tips for reliable work. Large contact faces on the tips: no distortion of circlips, easy fitting. Bolted joint: precise, zero backlash operation of pliers. Internal opening spring, protected and captive. Non-slip plastic coating on the handles. angled tips. self-service card/blister. Size of shaft: Ø 19 – 60 mmTips (diameter): 1.8 mm

Knipex Cobra Hightech Water Pump Pliers with their slim multi-component grips, designed for use in confined spaces The Knipex 8702250 (loose) Cobra Hightech Water Pump Pliers are 250mm in length with a capacity for nuts of 46mm and pipes 50mm. The benefits of working with the Knipex Cobra are plain to see. These water pump pliers are light and stable, can be adjusted on the component quickly at the touch of a button and are self-locking on pipes and nuts. With their slim multi-component grips without collar, they can be very easily transported and used in confined spaces. For pipes, nuts, sleeves, for various kinds of components: the professional user applies the Knipex Cobra quickly and accurately …

Expert quality XP1000®, manufactured from premium steel forged in Germany. Induction-hardened jaws provide ultimate effortless clean cutting and long-term performance. The precision-machined pivot pins allow smooth one-handed operation with minimum play for ease of use. Curved parrot beak jaws pull the cable for a clean cut. Two part bi-material ergonomic soft grip handle allows maximum grip and user comfort, and horns prevent slipping onto live conductors. Tested to 10,000V, these pliers are suitable for working on live circuits of 1,000V AC and 1,500V DC. Maximum cutting capacity: 15mm.

Expert quality XP1000®, manufactured from premium steel forged in Germany. Induction-hardened jaws provide ultimate effortless clean cutting and long-term performance. The off-centred precision-machined pivot pins not only allow a smooth one-handed operation and minimum play for ease of use, but increases the ease of cutting harder wires. Two part bi-material ergonomic soft grip handle allows maximum grip and user comfort, and horns prevent slipping onto live conductors. Tested to 10,000V, these pliers are suitable for working on live circuits of 1,000V AC and 1,500V DC.