Pliers, Wire Cutters & Cable Cutters

Knipex 7806125 Electronic Super Knips VDE 1000V 125mm The Knipex 7806125 Electronic Super Knips are made from INOX tool steel with a polished head. The handles are VDE insulated to 1000V with multi-component grips. Very small pliers for the most detailed work. Features:
- Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
- Ground, very sharp cutting edges without bevel
- Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
- Precision shaped tips cut wires resting on a board from 0.2 mm dia.
- Joint with stainless steel rivet
- Extremely smooth movement …

Suitable for cutting high tensile material up to 40HRC. Jaws hardened and tempered to HRC58 - 62 to give long life and good cutting capability. Centre cut jaw pattern. Plastic grips on handles. Spare jaws available. Sold loose.

Features:- Minimal cutting effort required - blades sharpened after heat treatment for maximum effectiveness- Offset pivot for max power- 60/62HRc High frequency hardened cutting edge for longer working life

Expert quality XP1000®, manufactured from premium steel forged in Germany. Induction-hardened jaws provide ultimate effortless clean cutting and long-term performance. The off-centred precision-machined pivot pins not only allow a smooth one-handed operation and minimum play for ease of use, but increases the ease of cutting harder wires. Two part bi-material ergonomic soft grip handle allows maximum grip and user comfort, and horns prevent slipping onto live conductors. Tested to 10,000V, these pliers are suitable for working on live circuits of 1,000V AC and 1,500V DC.

Exhaust pipe cutter pliers designed to cut single-wall pipes up to 83mm diameter. There are 15 steel cutting discs, and it takes just a 90 degree turn to make a complete cut, making this an ideal tool for working in confined spaces. Cutting oil is needed for effective use. Not to be used on stainless steel exhaust pipes.

Expert quality XP1000®, manufactured from premium steel forged in Germany. Induction-hardened jaws provide ultimate effortless clean cutting and long-term performance. The off-centred, precision-machined pivot pins not only allow smooth one-handed operation with minimum play for ease of use, but also increase the ease of cutting harder wires. A two-part bi-material ergonomic soft grip handle allows maximum grip and user comfort, and horns prevent slipping onto live conductors. Tested to 10,000V, these pliers are suitable for working on live circuits of 1,000V AC and 1,500V DC. The handle also incorporates a tethered fixing solution to comply with Work at Height Regulations (lanyard Stock …

Replacement centre cut high tensile jaws for Faithfull bolt cutter. The jaws are easily adjustable to allow for wear, or when cutting different shaped sections of metal. Note: It is advisable to position the workpiece as far back in the jaws as possible when cutting metal.1 x Faithfull FAIBCJ18N Bolt Cutter Jaws - Centre Cut High Tensile 460mm (18 inch)Additional Information:• Size: 460mm (18in)

The Milwaukee Hand Tools Bolt Cutters with heavy-duty, forged steel blades, have a strong, durable cutting edge. A blade adjustment screw ensures high-performance and a long-life. Fitted with ergonomic handles, comfortable for repetitive use. The handles also feature lanyard holes for easy tethering. These Milwaukee Hand Tools Bolt Cutters have the following specifiation Length 335mm (13in) Cutting Capacity HRC 31 Materials 8mm, HRC 48 Materials 5mm

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Chrome Molybdenum steel jaws, steel handles and comfortable rubber grips.• Suitable for materials up to 35 HRC hardness.• Lifetime guarantee*.Chrome Molybdenum steel jaws, steel handles and comfort grips. Suitable for materials up to 35 HRC hardness.• Chrome Molybdenum steel jaws, steel handles and comfort grips. • Suitable for materials up to 35 HRC hardness. • Lifetime guarantee*. • Model No. AK507Technical Specification:Capacity Range: 7mm-Soft Metals, 5mm-Medium MetalsLength: 350mmNett Weight: 0.93kgDimensions: Length: 134mm x Height: 34mmWeight: 1.012KgWarranty: Life

The Britool Expert Twin Slip Joint Multigrip Pliers have ergonomic, bi-material handles for comfortable use. They feature a patented pushlock button and have 17 joint positions. The pliers have a black chromium finish and conform to ISO 8976.

These Knipex internal straight circlip pliers are made with a special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. The Knipex circlip plier range comes in internal, external, straight and bent versions. These Knipex 48 11 series external straight circlip pliers are ideal for confined areas. With the slim head style design, they are constructed from chrome vanadium electric steel forged with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications …

These Knipex internal bent circlip pliers are made with a special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. The Knipex circlip plier range comes in internal, external, straight and bent versions. These Knipex 48 21 series internal circlip pliers with 90 bent tips are ideal for confined areas. With the slim head style design, they are constructed from chrome vanadium electric steel forged with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications …

For very tough, continuous use High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio Precision cutting edges additionally induction hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire Chrome vanadium heavy-duty steel, forged, oil-hardened

Cable Shears, 165mm by Knipex

These Knipex internal bent circlip pliers are made with a special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. The Knipex circlip plier range comes in internal, external, straight and bent versions. These Knipex 48 21 series internal circlip pliers with 90 bent tips are ideal for confined areas. With the slim head style design, they are constructed from chrome vanadium electric steel forged with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications …

With integrated forged axle for heaviest duty. Suitable for all types of wire including piano wire. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio. Precision cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Chrome vanadium heavy-duty steel, forged, multi stage oil-hardened.

The Stanley FatMax VDE Maxsteel Waterpump Pliers are made from a heat treated, high chrome steel forging for long life and with hand ground induction hardened blades. DIN /ASO/ANSI compliant. For gripping a variety of electrical fittings or assembly components. Approved for working around live circuits that do not exceed 1,000 volts. Compliant to EN60900, IEC/CE1900/VDE0680.

Bahco Side Cutting Pliers for cutting hard materials such as piano wire, copper wire and plastic insulated wire. They are made form high performance alloy steel and have two-component handles for comfort. 1 x Bahco 2171G Side Cutting Pliers 180mm (7in)

Bahco End Cutter Fencing Pliers which are phosphated, anti-corrosion treated and have a cutting capacity on iron wire up to 2.5mm maximum. Made from chrome vanadium steel with plastic coated handles.

These Knipex external bent circlip pliers are made with a special tool steel construction with PVC dipped handles for added comfort, durability and most importantly added grip. The Knipex circlip plier range comes in internal, external, straight and bent versions. These Knipex 49 21 series external circlip pliers with 90 bent tips are ideal for confined areas. With the slim head style design, they are constructed from chrome vanadium electric steel forged with precision non-slip tips for added strength and durability. Like most of the Knipex range of pliers, all components are oil hardened with polished heads and plastic coated handles. Knipex circlip pliers are ideal for all trade or DIY applications …

Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip. The Knipex 46 31 series of external bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45 bent tips. Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip. Size 210mm Shaft size 40-100mm

Lightweight and compact wire rope cutters for wire rope with 4.00 / 1960 Nmm. Features and benefits Double-mounted box joint design for high level of stability Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC Convenient work thanks to opening spring Secured by locking device during transport Ball bearing steel

Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip. The Knipex 46 21 series of external bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 90 bent tips. Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip. Knipex circlip pliers are ideal for all trade or DIY applications and especially the automotive trade. Length 200 mm. Shaft size 40 - 100 mm.

Expert Quality, manufactured from chrome nickel steel hardened and tempered with two hardened cutting zones - one for fine cable and the other for 6mm cable. Polished head with lacquered finish. Special non slip cushion - grip handles. Display packed.