Gear Oils

TOP TEC MTF 5100 75W is low-viscosity high-performance transmission fluid. Thanks to its excellent shear stability,this oil offers high potential fuel savings and optimum wear protection. TOP TEC MTF 5100 75W ensures outstanding shifting comfort under all operating conditions thanks to the good viscosity temperature properties. this oil is especially used for manual and automated manual transmissions. Properties - Outstanding shifting comfort under all operating conditions - outstanding corrosion protection - excellent viscosity/temperature properties - excellent synchronous behavior outstanding - resistance to oxidation The specifications and instructions from the assembly or vehicle manufacturer …

Our fully synthetic high-performance gear oil SAE 75W-90 is a top grade, high-pressure gear oil for high load manual, auxiliary, transaxle and hypoid transmissions. High-quality, synthetic-based oil and modern additive technology ensures a broad application range and optimum transmission lubrication under extreme conditions. The low viscosity characteristics of this gear oil make it also suitable where shifting difficulties exist (e.g. stiffness or noise generation). PROPERTIES - Outstanding seal compatibility - Excellent resistance to aging - Excellent wear resistance - High pressure-absorption capability - Reduces gearshift resistance - Excellent corrosion protection The requirements of …

Fully synthetic high-performance, high-pressure gear oil For extremely high-load manual, auxiliary, transaxle and hypoid transmissions. Ensures exact friction behavior and provides outstanding ageing resistance. Even under the most difficult conditions and during large temperature fluctuations, it ensures flawless aggregate functioning. Miscible with any mineral-base oil residues remaining during oil changes in transmissions and axle drives. PROPERTIES - distinctive high-pressure characteristics - excellent wear protection - reduces gearshift resistance - outstanding viscosity stability - reduces transmission noise - outstanding corrosion protection APPLICATION - While application the requirements …

High Performance Gear Oil GL3 is based on synthesis technology with extremely high performance reserves. This Gear oil ensures a broad application range and optimum transmission lubrication under extreme conditions with long oil-change interval up to 320 000 km. The low-viscosity characteristics of this gear oil make it also suitable where shifting difficulties exist (e.g. stiffness), where for example problems occur with the use of high-viscosity/single grade oils. PROPERTIES - reduces gearshift resistance - extremely long oil change intervals - outstanding corrosion protection - excellent wear resistance - excellent viscosity/temperature properties - reduces transmission noise - very compatible …

Top Tec MTF 5200 75W-80 is low-viscosity high-performance transmission fluid with excellent high pressure and wear protection properties. This Multi-purpose gear oil reduces friction, lowers fuel consumption and emissions and ensures smooth shifting operations. The outstanding thermal and oxidative stability assures a clean transmission and a long oil service life. PROPERTIES - Excellent high-pressure and wear protection properties - Saves fuel and reduces pollutant emissions - Reduces gearshift resistance - Excellent synchronous behavior - Optimum stability to aging - Outstanding resistance to oxidation Developed for use in transaxles, manual transmissions and transfer cases. The specifications …

High-quality, fully-synthetic hypoid gear oil for extreme load conditions, which has been specially developed for use in final drives with and without locking differentials. This oil is capable of altering the frictional coefficient between the clutch plates in such a way as to prevent stick-slip and its consequential judder. SUITABLE FOR extremely high-load final drives with and without locking differentials and ancillaries. PROPERTIES - excellent viscosity/temperature properties - reduces running noise - outstanding corrosion protection - excellent wear resistance - very compatible with seals - high pressure-absorption capability - for extended oil-change intervals - excellent resistance …

Top Tec MTF 5400 75W90 is evrsatile transmission fluid based on synthetic technology which offers large power reserves and exceeds the high test requirements of renowned vehicle manufacturers. Top Tec MTF 5400 75W90 ensures that assemblies function perfectly, even under the most extreme operating conditions and when exposed to large temperature fluctuations. This Transmission fluid has reliable lubrication, which assures optimum protection against wear and reduced transmission noise and also allows long oil change intervals. PROPERTIES - Excellent viscosity/temperature properties- outstanding seal compatibility- excellent resistance to aging- excellent wear resistance- high pressure-absorption …

Top Tec ATF 1950 is an automatic transmission fluid for ideal performance thanks to its premium combination of active agents. Top Tec ATF 1950 outstanding stability of the friction coefficient enables extended oil change intervals. Properties- reduces fuel consumption- excellent viscosity/temperature properties- outstanding friction characteristics- high efficiency- very good low-temperature properties For the new generation of the Mercedes-Benz-9-speed automatic transmission. The specifications and instructions from the assembly or vehicle manufacturer must be followed. Cannot be mixed with oils of other specifications.

Putoline Oil - Driven by Technology. Putoline ATF is a high quality oil for use in automatic, synchronized power shift transmissions, manual transmissions, torque converters, servo systems and hydraulic clutches. Its good friction properties, high oxidation and thermal stability combat friction and guarantee a long service life. ATF is a transmission lubricant that can be used on certain two-stroke transmissions. (See original manual for specific advice.) Specification: Dexron ID.

Motul Multi DCTF is a high performance Technosynthese lubricant specially engineered for Dual Clutch Transmission (DCT) gearbox type. Suitable for use in a wide range of vehicles fitted with DCT gearboxes featuring Double-Dry Clutch Transmission and Double-Wet Clutch Transmission design.

High performance Technosynthese fluid specially engineered for Continuously Variable Transmission (CVT) gearbox type. Suitable for use in a wide range of vehicles fitted with CVT gearboxes using either chain/pulleys or belt/pulleys design.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

All mechanical transmissions, reduction gears and hypoÏd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revoluation speed. Specially recommended when the xxW-90 lubricant requested by the gearbox manufacturer is not strong enough to handle very heavy loads, shocks or/and high temperatures.

Motul HD offers excellent protection and is suitable for any type of seal and yellow material used in gearboxes design.

Motul HD offers excellent protection and is suitable for any type of seal and yellow material used in gearboxes design.

All mechanical transmission, manual gearboxes and differentials operating under mild loads and low revolution speed and moderate temperatures designed to use a straight mineral oil.

All mechanical transmission, manual gearboxes and differentials operating under mild loads and low revolution speed and moderate temperatures designed to use a straight mineral oil.

All mechanical transmission, manual gearboxes and differentials operating under mild loads and low revolution speed and moderate temperatures designed to use a straight mineral oil.

All mechanical transmission, manual gearboxes and differentials operating under mild loads and low revolution speed and moderate temperatures designed to use a straight mineral oil.