Chargers & Jump Starters

ABSAAR PRO 8.0 12V 8A / 24V 4A DC Fully Automatic Intelligent Connect & Forget Smart Battery Charger Fully Automatic Intelligent Connect and Forget Smart battery charger. Does not require manual disconnection after charging (But if you switch off the charger then please must remove it) Suitable for charging up to 160Ah and maintenance charge up to 220Ah Screen: Large LCD Display with compact design Charging Voltage & Current 12V 8A / 24V 4A Charges Standard Lead Acid Batteries & VRLA (AGM . Gel) Batteries including Start Stop (EFB & AGM) Batteries Desulphation function for old batteries. Wintermode for charging in low temperature. Wrong polarity and short circuit protection. Input

ABSAAR PRO 6.0 12V 6A / 24V 3A DC Fully Automatic Intelligent Connect & Forget Smart Battery Charger Fully Automatic Intelligent Connect and Forget Smart battery charger. Does not require manual disconnection after charging Suitable for charging up to 120Ah and maintenance charge up to 180Ah Screen: Large LCD Display with compact design Charging Voltage & Current 12V 6A / 24V 3A Charges Standard Lead Acid Batteries & VRLA (AGM . Gel) Batteries including Start Stop (EFB & AGM) Batteries Desulphation function for old batteries. Wintermode for charging in low temperature. Wrong polarity and short circuit protection. Input voltage: AC230V Output Voltage (Charging Voltage): 12V / 24V Max

Smart 8-level automatic charging cycle. Fully automatic, microprocessor operated diagnosis, rescue, charging, and maintenance functions. Battery-saving soft charging function. Rescue function for deeply discharged batteries activated at 1.5V. Disassembly of the battery not required. For passenger cars, motorcycles, boats, and tractors. Safe and easy use. No damage to the sensitive on-board electronics. Effective charging current: 1.5 A. Comfort connector* Charging characteristics: microprocessor operated, 8 stages. Battery type: gel, AGM, lead acid, maintenance-free and low-maintenance batteries. battery voltage: 230 V alternating current. All-weather functionality. For all common 6 V and …

Increases the grip on snow, sand, and unpaved ground Adjustable angle for use on uneven ground Foldable and therefore can be stored in the car with minimum space requirements Weight limit: 3500 kg each set. Material: polypropylene Size: 59 x 17.50 cm. Content: 2 pieces per set.

Battery protection The starter batteries remain functional even at extremely low temperatures Place the thermal case around the battery and secure it with the Velcro strap At -20 °C, the maximum extractable capacity is higher by approx. 20% compared to without protection against cold Remove of thermal battery case after winter season, in order to avoid overheating of the liquid

With stylish LED lighting (blue) and design mesh 2-way speaker, 3" tweeter, 6.5" subwoofer/ midrange speaker With illuminated bass reflex openings With carpet panelling Speaker terminal connections: (4-pin) suitable for cables of 2.5 mm², incl. 12 V connection, Specifications: maximum load: 300 W (impulse), frequency: 60-22,000 Hz, max. sound pressure level: 90 dB, impedance, 4 ohms

The world’s most advanced SELECTABLE battery charger for starter/deep cycle batteries. OptiMate 7 Select comes with a POWER SUPPLY mode for vehicle memory settings & more! Ideal for: STD, AGM, GEL & Deep Cycle 12V batteries from 3 – 240Ah. SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 10A (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging Special feature: POWER SUPPLY mode delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery.

Battery Suitable for all types permantente monitoring Prevents energy loss The engine always remains M3 Battery is charged always

Power station with air compressor 18 bar (260 PSI), 12 V Extremely sturdy plastic housing With integrated work light With power plug, DC connection cable set, 12V automotive connection cable The ideal starting aid and power supply for cars, boats, motorhomes, etc.

The world’s most advanced 12V 10A & 24V 5A battery charger! OptiMate 7 12-24V is perfect for high performance starter & deep cycle batteries that demand temperature controlled charging & long maintenance! Ideal for: STD, AGM & GEL 12V (batteries from 10 – 240Ah) | 24V (batteries from 5- 120Ah). SAVE : Low Volt Start of 0.5V (12V) + 1-step desulphation recovery. CHARGING AMPS : 10A @ 12V / 5A @ 24V (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

- Battery voltage, current, power, ampere-hours consumed and state of charge - Remaining battery life according to current consumption Programmable relay to turn off non-crucial loads, or to start a generator if necessary. - A 500 amp quick connect shunt and a connection kit

AccuMate 6/12V Charger. Ideal for classic cars, motorcycles and many other uses. IDEAL FOR : 6V & 12V STD, AGM, GEL lead-acid batteries, starter and deep cycle, up to 50Ah LOW VOLT START: Low Volt Start of 2V for 6 or 12V batteries. CHARGING AMPS : 1.2A (temperature protected) Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

The world’s most advanced SELECTABLE battery charger for starter/deep cycle batteries. OptiMate 6 Select comes with a POWER SUPPLY mode for vehicle memory settings & more! Ideal for: STD, AGM, GEL & Deep Cycle 12V batteries from 3 – 144Ah. SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 6A (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging Special feature: POWER SUPPLY mode delivers stable power for vehicle system reprogramming, show room vehicle demo or retaining memorised settings when battery cables are disconnected to fit powered accessories or replace the battery.

The world’s most advanced fully automatic 12V battery charger! OptiMate 6 saves batteries that other chargers can’t by recognizing the difference between a discharged or sulphated battery Ideal for: AGM / MF, STD, GEL and spiral cell batteries up to 240Ah SAVE : Low Volt Start of 0.5V + 2-step desulphation recovery. CHARGING AMPS : 5A (Ampmatic) Included Accessories: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

The world’s most advanced 12V & 24V battery charger! OptiMate 6 12V-24V is perfect for high performance starter & deep cycle batteries that demand temp. controlled charging & long term maintenance! Ideal for: STD, AGM & GEL 12V (batteries from 3 – 240Ah) | 24V (batteries from 1- 100Ah). SAVE : Low Volt Start of 0.5V (12V) + 1-step SAFE pulse recovery. CHARGING AMPS : 6A @ 12V / 3A @ 24V (Ampmatic) Included: O11 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

Input cable length: 2m Output cable length: 2m Mounting: Easy direct wall mounting Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamps Lead for bench charging Warranty: 3 years

Fit Type: Universal SAFE TO USE: User Safety through spark-free operation and reverse polarity protection. Vehicle Electrical Safety through exceptionally clean voltage and current delivery with no surges or spikes. No need to disconnect the battery from the vehicle when charging. Unique 8 step charging system with a patented program that tests battery condition and, charges and maintains to ensure maximum battery life and performance No sparks, short-circuit proof and reverse polarity protected makes it safe for all the vehicles electronics and easy to use Water and dust resistant means it is safe to use in all climate situations

Compatible: CTEK MXS 3.6, MXS 5.0, MXS 5.0 Polar, MXS 5.0 Test&Charge Tough: hardwearing silicone bumper, designed and tested in Sweden Non-slip: Will help the charger grip on angled or slippery surfaces Enhanced grip: For easier handling of your CTEK charger Protects: Strong defence against accidental drops, scrapes and scratches. Easy to fit: this snug-fitting bumper is lightweight, flexible and simple to get on and off.

Product 1: Enables your car battery to be charged through a 12V cigarette socket Product 1: Compatible with all CTEK chargers up to 7A Product 1: Fits 12mm and 21mm sockets Product 1: Easy to fit and has a 60mm length cable Product 2: Easier connection: 2.5 metre cable, for connection to further away or hard to reach batteries Product 2: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 2: Secure: snug and safe connection via CTEK’s unique in-built connect system Product 2: Compatible: the Connect 2.5M Extension is designed for with CTEK chargers up to 10A output.

Enables your car battery to be charged through a 12V cigarette socket Compatible with all CTEK chargers up to 7A Fits 12mm and 21mm sockets Easy to fit and has a 60mm length cable International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Charges batteries up to 300Ah. Maintains larger batteries up to 500Ah Fully automatic charging includes patented desulphation and pulsemaintenance programmes Analysis mode to check if battery can hold charge IP44 rated - suitable for outdoor use 2 year warranty

2 paper rolls for smart printer modules

Product 1: Quick indication: LED traffic light system to show battery charge levels, so you know when to charge. Product 1: Easier connection: features CTEK’s unique Connect system, so it can be attached to a CTEK charger, providing easy access to the battery. Product 1: Tough & durable: hardwearing, flexible cables, designed and tested in Sweden Product 1: Compatible: the Indicator eyelet is designed for use with CTEK chargers up to 10A output. Product 2: Quality Product