Chargers & Jump Starters

New improved clamp lead for OptiMate and AccuMate battery chargers with white TM connectors. This lead can be used to replace old or damaged clamp leads
Compatible with standard TM connectors
Reliable weatherproof connection
Length: 50cm

Automatic charging, testing and maintenance of 12 V AGM, GEL, EFB or STD lead-acid starter or deep cycle batteries of any size at any temperature - voltage is set higher in cold and lower in heat
The Ampmatic charging controller adjusts the power to the battery size - a small battery receives less, a large battery more
Saves deeply discharged sulphated batteries still at 0.5 V - the most advanced rescue program!
The unique pulse absorption mode optimises battery performance - all cells are brought to the same strength!
The OptiMate intelligent 24-7 maintenance guarantees more battery power and longer life!

The converter cable from DIN ø12mm BIKE socket into DC2. 5 for heated appreal- 60cm/24in.
90° angled connection.
Compatible with the fitting of BMW, Victory, Triumph & John Deere charging ports.
Industry standard durability - Built to last!
Includes weatherproof sealing DIN cap and in-line SAE seal. . Perfect for use in the harshest environments, Low temperature use -40°C/-40°F - Remains Flexible!

Longer 100 cm / 40 inches length with M8 / 5/16 ″ eyelets suitable for a variety of battery terminals, with 15A fuse that protects the cable and electronics suitable for -40°C - premium quality!
Encapsulated monitor with 4 LEDs shows the battery charge status from full to empty for 12V lead batteries (AGM, GEL or STD) - The LED corresponding to the charging status flashes every 3 seconds.
SAE quick connection for charging the battery when needed - with weather-resistant - cap for use while driving
Indicates charging system status when engine is running - Easy check before driving at a glance to see if the battery is charging.

To supply 2 heated garments (jacket / gloves, etc.) via your permanent SAE battery cable!
Length = 12" / 30 cm.
-40 ° C / -40 ° F For use at very low temperatures. Cable remains flexible at temperatures below freezing.
2 x DC 2.5 mm jacks. Max. Cable rating: 10 Amp.
With cable seals for DC 2,5 mm and OptiMate heavy load SAE connection.

Bosch Professional 12v battery and charger starter kit. Contains two 12v 2.0ah lithium ion batteries and a GAL 12V-40 battery charger. Specifications • Battery Voltage: 12v • Battery Capacity: 2.0ah • Battery Quantity: 2

• Max. Charge: 45A (30A EN).• Max. Start: 200A (180A EN).• 12/24V Output.• Battery Range: 30-500Ah.• Combination units capable of both charging batteries and providing boost power to help start vehicles with flat batteries.• Models feature easy-to-read ammeters and illuminated power switches.• Circuitry is protected by a panel mounted fuse.• Suitable for heavier garage use for engines up to 3L capacity.• Built-in polarity protection.Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suit…

• Max. Charge: 21A(14A EN).• Max. Start: 140A(80A EN).• 12/24V Output.• Battery Range: 15-240Ah.• Combination units capable of both charging batteries and providing boost power to help start vehicles with flat batteries.• Models feature easy-to-read ammeters and illuminated power switches.• Circuitry is protected by a panel mounted fuse.• Suitable for fleet operators running cars and van derivatives.• Built-in polarity protection.Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suitable for…

• Fully automatic microprocessor controlled dual voltage battery charger and maintainer with automatic voltage detection.• Patented Speed Charge technology actively monitors the charge acceptance and constantly modifies the charge output.• Charges the battery up to three times faster than conventional battery chargers without damaging the battery.• Heavy-duty sturdy case with no-nonsense controls.• Easy-to-read LED status lights and LED scrolling digital messaging display screen gives step-by-step instructions.• Charges conventional lead acid, calcium, AGM/GEL, leisure and stop/start batteries.• Fully automatic float mode ensures that the battery is kept fully charged and ready to use, for ex…

• Hardwired jump lead cables provide a permanent socket for use with Model No's SL1S, SL65S, SL67S or SL69S, eliminating the need for tools to access the battery terminals.• Used in conjunction with Model No. SL65S this is perfect for motorbikes with batteries under seats or behind panels.• Water tight plug and insulated cables allow for permanent fitment.• Features smart cable technology that monitors and protects against reverse charging.• 2 Year guarantee*.Hardwired jump lead cables provide a permanent socket for use with Model No's SL1S, SL65S, SL67S or SL69S, , eliminating the need for tools to access the battery terminals. Used in conjunction with SL65S and other compact jump starters t…

Victron Energy Skylla TG 24/80 (1+1) Battery Charger.Two independent outputs:one full and one limited to 4 amps.The charging voltage can be precisely adjusted to suit any battery system.The charger input is 230 V at 50/60 HZ.The charging voltage can be measured directly at the battery terminals to compensate for voltage loss due to cable resistance.An external temperature sensor allows the charging voltage to be reduced when the battery temperature rises.Skylla TG 24/80 Battery Charger (1+1).Perfect chargers for all types of batteries.Skylla TG chargers are lightweight and compact thanks to high-frequency technology.The charging voltage can be precisely adjusted to suit all types of batteries,…

Skylla TG 24/50 Battery Charger (1+1).Perfect chargers for all types of batteries.Skylla TG chargers are lightweight and compact thanks to high-frequency technology.The charging voltage can be precisely adjusted to suit all types of batteries, open or sealed.Sealed, maintenance-free batteries require particularly precise charging for a good service life.Any overvoltage will cause excessive gassing followed by drying out and premature malfunction.3-stage regulated charging.The three charging stages of the Skylla TG chargers are precisely controlled by microprocessor.The IUoUo charging curve guarantees the fastest and safest charging for all battery types.The absorption time is adjustable by means …

Victron Energy Skylla IP65 12-Volt 70 amp Battery Charger (3) features 3 isolated outputs (3 Bank) - All outputs can supply the full rated output current
LCD display for status monitoring and to easily adapt the charge algorithm to a particular battery and its conditions of use
The Storage mode feature provide less maintenance and aging when the battery is not in use, to increase battery life, every Victron Energy Skylla IP65 comes with a battery temperature sensor
In order to compensate for voltage loss due to cable resistance, a voltage sense facility is provided so that the battery always receives the correct charge voltage
Incorrect installation can be hazardous, Please consult a licensed …

A modern and powerful battery charger that withstands the rigors of an adverse environment:heat, humidity and salt air.- The right amount of charge for a lead-acid battery:variable absorption time.- BatterySafe mode:preventing damage due to excessive gassing.- Storage mode:less maintenance and aging when the battery is not in use.- Smaller and lighter compared to similar models.- NMEA 2000 Canbus connection.- PowerControl:set a maximum shore power.- Remote Control.- Li-ion (LiFePo4) ready.Features:Skylla-i (1+1):two outputs to charge 2 battery banks.The Skylla-i (1+1) features 2 isolated outputs.The second output, limited to approximately 4 A and with a slightly lower output voltage, is intended …

The battery charger universal input voltage V AC powered 90-265 90-400 volts DC or 24 volts DC and produce 50 amperes in a single output with an auxiliary output 4 amps.The remote panel right for this charger is the SDRPSKC.