Chargers & Jump Starters

The Victron Skylla-TG 24/30 and 24/50 GMDSS Chargers have been designed to provide all required monitoring and alarm data.Both the battery and the GMDSS system are connected directly to the charger.Data and alarms are displayed on a digital panel (VE.Net GMDSS panel, to be ordered separately).A standard eight wire UTP cable connects the charger to the panel.Features.GMDSS.The Global Maritime Distress & Safety System (GMDSS) was developed by the International Maritime Organisation (IMO) to improve maritime distress and safety communications.Power supply.The Skylla TG has proven itself to be an excellent battery charger and power supply for GMDSS applications.However, when using a standard Skylla …

• Cable & Clamp Length: 0.3m. • Delivers up to 800 Peak Amps of initial starting power.• High output sealed AGM battery with clamp storage and rope carry handle.• Suitable for starting vehicles with 4-cylinder petrol engines up to 2L or diesel 1.6L.• Front panel includes an integral LED worklight.• Reverse polarity and short circuit protection with audible warning.• Mains charger with automatic power cut-off prevents damage to battery whilst charging.• Inbuilt MOSFET circuit protection.• Single 5V 2.4A USB output.• Supplied with mains charger.• Durable case protects unit when stored.High output sealed AGM battery with clamp storage and rope carry handle. Suitable for starting vehicles with 4-cylind…

Victron Energy Quattro 24-Volt 3000VA 70 amp is a combined 230V inverter and battery charger, additionally it can be connected to two independent AC sources
In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate
With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection
Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible
Incorrect installation can be hazardous, Please …

Victron Energy Quattro 12-Volt 3000VA is a combined 230V inverter and battery charger, additionally it can be connected to two independent AC sources
In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate
With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection
Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible
Incorrect installation can be hazardous, Please consult …

Suitable for turbo charging of 14.4 to 36 V Li-ion batteries from Bosch battery devices
Charging current: 8 A.
Input voltage: 220-240 V.

• HIGH performance 66Ah AGM battery, specially formulated to jump-start up to 8-Cylinder engines up to 9.0L diesel and 12.0L petrol.• DURABLE casing and totally portable thanks to a retractable handle and puncture proof wheels.• 0/12/24V rotary switch for spark-free connection.• SUPPLIED with heavy-duty brass clamps with inbuilt short circuit protection fuse (in the + clamp)• REVERSE polarity alarm, both visual and audible.• 12V FUSED output socket can be used as a memory saver, as well as powering accessories such as mini compressors.• SUPPLIED with an automatic 12/24v 7A smart charger and maintainer.• MADE in Switzerland.• 2 YEAR GUARANTEE*.Technical SpecificationAuxiliary Output: 1 x 12VCab…

Victron Energy Phoenix 12-Volt 50 amp Microprocessor Battery Charger with two full rated outputs and one 4 amp output
Victron Energy Phoenix Charger features a microprocessor controlled adaptive battery management system that can be preset to suit different types of batteries
The adaptive feature will automatically optimise the charge process relative to the way the battery is being used
Victron Energy Phoenix Charger comes with a battery temperature sensor, when connected charge voltage will automatically decrease with increasing battery temperature
Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation…

• Cable & Clamp Length: 0.6m.• 22Ah Professional grade, high output AGM battery especially formulated to jump start vehicles.• Fully sealed battery enables the unit to be stored in any position.• Features a lightweight, high-impact casing, which is durable and corrosion proof for easy portability.• Battery status LEDs indicate to the user when the battery is at full power, 75% charge, 50% charge or less and when the unit needs to be recharged.• A fusible link integrated in the output cable gives increased protection to the unit, while enabling fuse change without disassembly.• On/off switch for safety and control.• Features 12V accessory outlet including overload and short circuit protection.• Wei…

Professional DC to DC Charger: The Orion-Tr Smart DC-DC Charger is a professional charger that uses three stages to efficiently and safely charge your batteries.
Dual Battery Charging: The Victron DC to DC charger is ideal for vehicles or boats where the alternator and start battery are used to charge the service battery.
Built-in Bluetooth: The DC to DC charger can be monitored and cotrolled with smartphone or tablet via Bluetooth and the VictronConnect App. This allows you to see the charger's status and make adjustments as needed.
Flexible Power Solution: The DC DC charger is suitable for both lead acid and lithium batteries and unlimited multiple units can be connected in parallel to …

Electrify your tankbag (with a “crosshair” current input) or create a weather-proof power connection on your hardcase!
Length: 10 inches (25 cm). DC 2.5 x 5.5 mm inner socket.
-40°C/-40°F - Suitable for use at very low temperatures. Cable remains flexible at temperatures below freezing.
Max. current rating: 5A.
With line rubber seal for OptiMate heavy load SAE connection.

2 cigar auto sockets with internal locking slots and sealing caps accept 2 automotive plug style USB chargers or GPS adapters

Power your heated clothing fitted with a 5.5mm by 2.5mm plug directly from your permanent battery lead
M6 ringlets
Length 50cm

Battery clips with 15A
fuse, easy grip rubber handles, custom designed to fit round, square (power sport) and flat tab posts
Includes inline rubber
seal for OptiMate heavy duty SAE connector.

With M6 / 1/4 inch eyelets that fit perfectly on your motorsport and most car battery terminals, and 15A fuse that protects the cable and electronics that can be used up to -40°C - premium quality!
Encapsulated monitor with 3 LEDs shows the charge status of the battery from full to empty for 12.8V / 13.2V LiFePO4/LFP batteries - The LED corresponding to the charging status flashes every 5 seconds.
SAE quick connection for charging the battery when required - with weather-resistant cap for use while driving
Indicates the charging system status when the engine is running, with fourth LED that indicates if the system is charged with more than 14.6V, which can damage lithium batteries - hassle-free c…

Keep an eye on the charging status of your mounted 12 V motorsport lead-acid battery, or check that the vehicle's charging system works correctly.
4 LEDs cover the "empty to full" voltage range of all 12 V batteries, including AGM with a higher voltage for motorsport (4. √√ LED ≥ 12.7 V).
2 operating modes – battery charging level monitor (individual LED light flashes) and charging system test (arrow mode).
Length = 24 inches / 60 cm, 15 A fuse, 1/4-inch / M6 eyelets.
SAE charging port with weather-resistant sealing cap.

Compatible with standard TM connectors
Reliable weatherproof connection
Length: 250cm

Convert your older TecMate or British charger battery cable to SAE connector with weather protected sleeve and cap!
Length=6″/15cm.
-40°C/-40°F very low temperature use.
Cable max. rating: 5 Amp. 15A fuse.
KET 2 pole connector with locking clip converts to an industry standard 2-pin SAE connector.

Converts any Ducati-specific battery charging port below the seat (for newer model, it converts into a 2-pin SAE connector in accordance with industry standards).
Length: 12 inches/30 cm.
-40 °C/-40 °F suitable for use at very low temperatures. cable stays flexible at sub-freezing temperatures.
Max. cable values: 5 Amp. 15 A Fuse.
With seal cap for OptiMate heavy-duty SAE connector.High-Quality Cable, Developed by TecMate. -

Charge extension lead
Item Package Length: 21.2cm
Item Package Width: 13.3cm
Item Package Height: 3.6cm

Y Splitter Motorcycle 90 ° rotating connectors, 2 x in-car socket output
Colour: blue
Model Number: O-36
Country of origin:- China

Plug with twist off adapter, fits 12mm BIKE/DIN or cigar / AUTO sockets, power delivered through an industry standard 2-pole SAE connector!
Length=20″/50cm.
Note – before ordering, please check that your cigarette lighter is live when the ignition is OFF.
8A fuse (inside connector). Cable max. rating: 5 Amp.
Industry standard 2-pin SAE connector. includes in-line rubber seal for OptiMATE heavy duty SAE connector.

Premium accessories

FLEXIBLE BATTERY CHARGER AND SAFETY DEVICE FOR THE WORKSHOP

VICTRON ENERGY PURE SINE WAVE INVERTER: The Victron Energy Multiplus inverter charger is a powerful true sine wave inverter and a sophisticated battery charger with adaptive charge technology
POWER ASSIST: With the unique Power Assist feature the MultiPlus solar inverter will prevent overload of a limited AC source, such as a generator or shore power connection
POWER WITHOUT INTERRUPTION: In the event of a grid failure, or when shore or generator power is disconnected, the Victron inverter is activated fast, within 20ms, and takes over the supply to the connected loads
PARALLEL OPERATION: Up to 6 Victron Energy MultiPlus Purew Sine Wave Inverter units can operate in parallel to achieve higher …