Chargers & Jump Starters

The Sealey START420 Starter/charger for professional garages, workshops and body shops The Sealey START420 is a heavy-duty charger and starter designed for use in professional garages and workshops. It can be used for anything from cars to commercial vehicles. Thanks to its large wheels, it can be easily manoeuvred around the site.  Features:
- 3 Phase
- Caters for all requirements from cars right up to light commercial vehicles
- Heavy-duty starter/charger for professional garages, workshops and body shops
- Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control Specification:
- Supply: 240V
- Output: 12/24V <&hellip;

The Sealey START320 Starter/Charger for professional garages, workshops and body shops  The Sealey START320 is a 12/24v Starter/Charger for professional garages, workshops and body shops. With large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control. Features:  
- Caters for all requirements from cars right up to light commercial vehicles 
- Heavy-duty starter/charger for professional garages, workshops and bodyshops 
- Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control   Specification: 
- Supply: 240V 
- Output: 12/24V 
- Input Start: 20A 
&hellip;

Amorphous solar panel converts daylight directly into 12V electricity. Suitable for maintaining charge in a wide range of batteries and power packs. Ideal for batteries stored in boats and caravans and for batteries in vehicles in long-term storage. IP44 Rating (non-waterproof). For use behind car windscreen or other protection. Supplied with suction pad fixings, battery clips and vehicle accessory socket plug (only suitable for vehicles with “permanent live” accessory socket). Features & Benefits: • Amorphous solar panels convert daylight directly into 12V electricity. • Suitable for maintaining charge in a wide range of batteries and power packs. • Ideal for batteries in boats, caravans a…

Fully automatic microprocessor controlled battery charger and maintainer, featuring patented Speed Charge technology. Charges the battery up to three times faster than conventional battery chargers without damaging the battery. Heavy-duty sturdy case with no-nonsense controls and LED status indicators. Battery presets include conventional lead acid, calcium, AGM/GEL, leisure and stop/start batteries. Fully automatic float mode ensures the battery is kept fully charged, maintained and ready to use. Features & Benefits: • Output: 12V 6A. • Battery Range: Max. 130Ah Lead Acid. • Fully automatic microprocessor controlled battery charger and maintainer. • Patented Speed Charge technology actively…

Fully automatic microprocessor controlled battery charger and maintainer, featuring patented Speed Charge technology. Charges the battery up to three times faster than conventional battery chargers without damaging the battery. Heavy-duty sturdy case with no-nonsense controls and LED status indicators. Battery presets include conventional lead acid, calcium, AGM/GEL, leisure and stop/start batteries. Fully automatic float mode ensures the battery is kept fully charged, maintained and ready to use. This unit also features a 10A power supply mode for maintaining battery power during prolonged periods of power draw, for example when a vehicle is on display in a showroom etc. Features & Benefits: …

Fully automatic multistage microprocessor controlled battery charger and maintainer. Sturdy case with protective bumpers and built-in hanging hook. By modifying the charge output through constant monitoring, the life and condition of the battery is optimised. Scrolling digital display with various inbuilt language options. Charge status LED. Multistage charging features thermal runaway, as well as integral ventilation and spark-proofing for maximum safety. Reverse polarity protection in case incorrectly connected to battery.

Fully automatic microprocessor controlled battery charger and maintainer, featuring patented Speed Charge technology. Charges the battery up to three times faster than conventional battery chargers without damaging the battery. Heavy-duty sturdy case with no-nonsense controls and LED status indicators. Battery presets include conventional lead acid, calcium, AGM/GEL, leisure and stop/start batteries. Fully automatic float mode ensures the battery is kept fully charged, maintained and ready to use. Features & Benefits: • Output: 12V 10A. • Battery Range: Max. 230Ah Lead Acid. • Fully automatic microprocessor controlled battery charger and maintainer. • Patented Speed Charge technology actively…

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Power Supply: None
Voltage: &hellip;

Victron Energy SmartSolar MPPT 75/10

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …

Hardwired jump lead cables provide a permanent socket for use with Model No's SL1S, SL65S, SL67S or SL69S, , eliminating the need for tools to access the battery terminals. Used in conjunction with SL65S and other compact jump starters this is perfect for motorbikes with batteries under seats or behind panels. Watertight plug and insulated cables allow for permanent fitment. Features smart cable technology that monitors and protects against reverse charging. Features & Benefits: • Hardwired jump lead cables provide a permanent socket for use with Model No's SL1S, SL65S, SL67S or SL69S, eliminating the need for tools to access the battery terminals. • Used in conjunction with Model No. SL65S this…

Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suitable for EFB and AGM/GEL (stop/start), Lead Acid, Lead Calcium and Silver Calcium batteries found on electric and hybrid vehicles. Features up to ten analysis and charge phases, including trickle/maintenance. and suitable for 12V and 24V electrical systems. Instant visual check of battery condition, charge current, voltage and charging rate via LED read-out. Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology. Includes circuitry to provide surge and spike protection during …

The new chargers of the SBC NRG + MINI series are even more efficient and compact thanks to new advances in technology. The redevelopment of the SBC NRG + charger allows 15% more output power than the industry standard, because it uses the injected current with almost no loss. They are used everywhere, where smaller power with small dimensions are needed. Thanks to the temperature-dependent ventilation system, the chargers not only quieter, but also protect your on-board battery at the same time.
3-stage charging curve IUoU
2 or 3 charging outputs for independent charging of several batteries by integrated charging current distributor (MosFet technology)
Each output is protected with integrated …

Composite case with integral battery clip storage and carry handle. Suitable for starting 4-cylinder petrol or diesel engines up to 2L. LED Battery condition and charge indicators. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger. Features & Benefits: • Cable and Clamp Length: 0.5m. • Delivers up to 1000 Peak Amps of initial starting power. • Suitable for starting 4-cylinder petrol or diesel engines up to 2L. • Starts up to 30 cars before recharging, depending on the l…

Composite case with integral battery clamp storage and carry handle. Suitable for starting vehicles with 4-cylinder petrol or diesel engines up to 2L. Front panel displays internal battery charge level and includes an integral LED work light. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic power cut-off prevents damage to battery whilst charging. Inbuilt MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug and one 5V 2.4A USB output. Features & Benefits: • Cable and Clamp Length: 0.6m. • Delivers up to 1100 Peak Amps of initial starting power. • Suitable for starting vehicl…

Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. Also features an integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V/1A). Supplied with mains charger.Specifications:Model No RS132Auxiliary Output: 2 x 12V Power …

Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. Also features integral air compressor with pressure gauge for accurately topping/pumping up tyres. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V/1A). Supplied with mains charger.

.container a:link { color: blue; } .container a:visited { color: purple; } .container a:hover { color: red; } .container a:active { color: green; } Sealey RS131 RoadStart® Emergency Jump Starter 12V 750 Peak Amps Composite case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED work light for use at night. Fitted with 12V power socket that will accept any 12V device fitted with a vehicle accessory socket plug and two 5V/2.1A USB outlets for phones and tablets. …

Composite hi-vis green case with moulded rubber protection, integral battery cable storage and carry handle. LED Battery condition, polarity check, with audible warning if polarity is reversed, and charge indicators. Features independent on/off switch which allows the positive clamp to be connected without the risk of sparking and an integral LED worklight for use at night. Fitted with two 12V power sockets that will accept any 12V device fitted with a vehicle accessory socket plug. Also features a USB outlet (5V?1A). Supplied with mains charger. Features & Benefits: • Cable and Clamp Length: 0.72m. • Composite hi-vis green case with moulded rubber protection, integral battery cable storage and …

Composite case with battery clip storage lugs and carry handle. Suitable for starting vehicles at 12V with 8-cylinder petrol engines up to 8L and 6-cylinder diesel engines up to 6L. 24V with 8-cylinder petrol engines up to 4L and 6-cylinder diesel engines up to 3L. Easy-to-read, colour-coded analogue gauge measures battery condition and charge indicator. Audible warning system for polarity protection. Positive cable fitted with protection against reverse charging from the vehicle. Test cycle button gives true battery indication. 230V Charger with automatic power cut-off prevents damage to battery whilst charging from the mains. Fitted with a power socket that will accept any 12V device with …

Composite case with integral battery clip storage and carry handle. Twin batteries, connected in either parallel or series to suit the output voltage, give high peak and cranking currents. Fitted with low voltage switch for use when on 24V system recharge, connecting unit to battery producing less than 1V. LED Battery condition indicators. Test button gives indication of battery condition. Fitted with 12V power socket that will accept any 12V device with a vehicle accessory socket plug. Supplied with mains charger and double plug cable for in-car charging.Cold Cranking Amps: 12V - 1000A, 24V - 500APeak Amps: 12V - 3200A, 24V - 1600AVoltage: 12V or 24V SwitchableAuxiliary Output: 12VCable & Clamp …

Composite case with integral battery clamp storage and carry handle. Suitable for starting 12V vehicles with 8-cylinder petrol engines up to 6L and 8-cylinder diesel engines up to 4.8L. also suitable for starting 24V vehicles with 6-cylinder diesel engines up to 3L. front panel displays internal battery charge level and includes an integral LED worklight. Reverse polarity and short circuit protection with audible warning. Mains charger with automatic cut-off prevents damage to battery whilst charging. Inbuild MOSFET circuit protection. Fitted with two 12V power sockets that will accept any 12V device with a vehicle accessory socket plug. Features & Benefits: • Cable and Clamp Length: 0.7m. •…