Chargers & Jump Starters Laser Tools

A mains powered 4A intelligent battery charger for use on 6V and 12V automotive batteries. Fully automatic, it features a 10-stage charging cycle which monitors the state of the battery and adjusts the charging output to suit. Automatically drops to a trickle charge of

Portable 240v Mains EV Charger 8A-13A IEC 62196-2 Type 2 vehicle plug, complete with carry bag. Adjustable Current 8A, 10A, 13A (refer to instructions). Input voltage 220 to 250v, 3 pin standard UK mains plug. Resistance voltage: 2000v, Insulated Resistance >1000M , Contact Resistance < 0.5m . Fire Rating UL94 V-O, Waterproof rateing IP54, Working temperature -30Cto 50C. Cable specification 3 x 2.5mm, + 2 x 0.5mm. Charging gun cable length: 4.5m. Complete with 0.5m cable with BS Mains connection. Protection: Overheat, overvoltage, overcurrent, overcharge, electric leakage. WARNING: if using with extension lead, ensure extension lead load rating is not exceeded and lead is fully extended.

Capacity 2220mAh will start diesel engines up to 3.5L and petrol engines up to 4.5L. Can also be used as a power bank for a laptop/phone, includes 2 USB ports, 2 to 2 USB cable and 2 smart jumper clamps. Start current 350A, peak current 700A, charging time approx. 3 hours with charging indicator. Short circuit, overcharge, discharge, low voltage, reverse polarity protection. Supplied with a storage/carrying case.

Emergency starter for cars, vans, boats, forklifts, motorcycles etc.Will start petrol engines up to 6500cc and diesel engines up to 3000ccIncludes two LED lights, voltage display, two USB ports 5v, British Standard plug charger, 12volt charger weight 4.2 kg. 2 Alligator clips with 38cm jump wireSize: 16.5" x 11" x 14"CE Certificated, conforms to FCC and UL Warning label: charge this unit every three months or leave on permanent charge. Failure to do so will damage the battery. ; Ensure the Master switch (N) is on before charging.

12 volt battery charger - designed for use on cars, motorcycles and light commercials' Smart charging capability - meaning it varies the amperage and voltage delivered according to the requirements of the battery. Low amps battery support mode - charger can be set to out put a constant 13.5 volts at 2, 5 or 10amps to support the battery when the ignition need to be left on for a period of time. Boost (rescue mode) - charger can be set to rescue mode to charge deeply discharged batteries - the tool is programmed to deliver a specific charge cycle to help desulphate the battery. Battery test mode - can be used to test the battery prior to charging. The 5475 does not need to be plugged into the …