Chargers & Jump Starters OptiMate

Automatic charging, testing and maintenance of 12 V AGM, GEL, EFB or STD lead-acid starter or deep cycle batteries of any size at any temperature - voltage is set higher in cold and lower in heat
The Ampmatic charging controller adjusts the power to the battery size - a small battery receives less, a large battery more
Saves deeply discharged sulphated batteries still at 0.5 V - the most advanced rescue program!
The unique pulse absorption mode optimises battery performance - all cells are brought to the same strength!
The OptiMate intelligent 24-7 maintenance guarantees more battery power and longer life!

Longer 100 cm / 40 inches length with M8 / 5/16 ″ eyelets suitable for a variety of battery terminals, with 15A fuse that protects the cable and electronics suitable for -40°C - premium quality!
Encapsulated monitor with 4 LEDs shows the battery charge status from full to empty for 12V lead batteries (AGM, GEL or STD) - The LED corresponding to the charging status flashes every 3 seconds.
SAE quick connection for charging the battery when needed - with weather-resistant - cap for use while driving
Indicates charging system status when engine is running - Easy check before driving at a glance to see if the battery is charging.

Ideal for 12V lead-acid batteries in the above-mentioned vehicles/boats.
The fully automatic multi-step program allows you to charge the battery safely.
Plug into battery and Optimate 6 Ampmatic does the rest, no monitoring required
Included components: weatherproof battery power cable and battery terminal set included.

With M6 / 1/4 inch eyelets that fit perfectly on your motorsport and most car battery terminals, and 15A fuse that protects the cable and electronics that can be used up to -40°C - premium quality!
Encapsulated monitor with 3 LEDs shows the charge status of the battery from full to empty for 12.8V / 13.2V LiFePO4/LFP batteries - The LED corresponding to the charging status flashes every 5 seconds.
SAE quick connection for charging the battery when required - with weather-resistant cap for use while driving
Indicates the charging system status when the engine is running, with fourth LED that indicates if the system is charged with more than 14.6V, which can damage lithium batteries - hassle-free c…

Convert your older TecMate or British charger battery cable to SAE connector with weather protected sleeve and cap!
Length=6″/15cm.
-40°C/-40°F very low temperature use.
Cable max. rating: 5 Amp. 15A fuse.
KET 2 pole connector with locking clip converts to an industry standard 2-pin SAE connector.

Plug with twist off adapter, fits 12mm BIKE/DIN or cigar / AUTO sockets, power delivered through an industry standard 2-pole SAE connector!
Length=20″/50cm.
Note – before ordering, please check that your cigarette lighter is live when the ignition is OFF.
8A fuse (inside connector). Cable max. rating: 5 Amp.
Industry standard 2-pin SAE connector. includes in-line rubber seal for OptiMATE heavy duty SAE connector.

Premium accessories

Extension for 5.A charger cable with splash and dirt proof SAE connection system.Length.4.6.m.Industry standard two-pin SAE connectors.Max rating of the cable:5.A.20.?C./.4.?F, use in low temperatures.Includes in-line rubber seal for the OptiMATE heavy-duty SAE connector.

5-step Battery charger / maintainer
12V/12,8V - 2A
Smart voltage & current control
Also for Lithium LiFePO4 batteries

4-step battery charger / maintainer
12v - 0,6a
smart voltage & current control
item package quantity: 1.0
Included components: Optimate 1 DUO - 4-step 12V 0.6A Battery charger-maintainer

Car Battery Charger / Battery Charge / Protection Short Circuit / Portable

Car Battery Charger / Battery Charge / Protection Auto Shut Off / Portable / Protection Class IP54