Chargers & Jump Starters

• Five pairs of coloured cables.• Each cable has shrouded crocodile clips at each end.• Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.Five pairs of coloured cables. Each cable has shrouded crocodile clips at each end. Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring.• Five pairs of coloured cables. • Each cable has shrouded crocodile clips at each end. • Use as extensions to multimeter leads, to bridge suspected open-circuit cables and as temporary wiring. • Model No. VS222Technical Specification:Contents: Red, Black, Green, White, YellowNett Weight: 0.08kgDimensions: Length: 35mm x…

1. Mounting locationWarning! For safety purposes, the product should be installed in a heat-resistant environment. Avoid the presence of e.g. chemicals, synthetic components, curtains or other textiles in the immediate vicinity of the product.
1.1. Install the galvanic isolator in a well ventilated area.1.2. Keep a clear space of 10 cm around the product for ventilation.1.3. The galvanic isolator must be mounted with its length vertical to allow for maximum cooling. Under normal circumstances, the temperature increase of the heat sink is not more than 20 °C. However the unit may become hot when conducting fault ground current.
2. InstallationWarning! The galvanic isolator must be wired …

1. Mounting locationWarning! For safety purposes, the product should be installed in a heat-resistant environment. Avoid the presence of e.g. chemicals, synthetic components, curtains or other textiles in the immediate vicinity of the product.
1.1. Install the galvanic isolator in a well ventilated area.1.2. Keep a clear space of 10 cm around the product for ventilation.1.3. The galvanic isolator must be mounted with its length vertical to allow for maximum cooling. Under normal circumstances, the temperature increase of the heat sink is not more than 20 °C. However the unit may become hot when conducting fault ground current.
2. InstallationWarning! The galvanic isolator must be wired …

Handy all-round 10A battery charger for charging various types of batteries. This battery charger can also be turned into a 12V power source, in this mode the charger gives 13,6V with a maximum of 5A output. Ideal for connecting, for example, a cool box. The battery charger uses high technology, the five-step loading technique makes it possible to charge batteries up to almost 100% of their original capacity to load. Automatic diagnosis, recovery, load and maintains batteries for months. Fully automatic charging technique which automatically switches to the correct mode. Comes with two connection cables; 1 with cable clamps and 1 with eye terminals. The basic cable is permanently mounted to …

• Max. Charge: 100A (80A EN).• Max. Start: 650A (450A EN).• 2.3kW Input (charge).• 11kW Input (start).• Battery Range:30-750Ah.• Heavy-duty starter charger for the medium and large garage, workshop and bodyshop operation.• The SuperStart range caters for all requirements from cars right up to passenger service and commercial vehicles.• Large wheels for easy mobility and features digital display and switchable charge circuitry for accurate charge control.• Suitable for EFB stop/start batteries.• EU Cenelec specification EN 60335.• Made in Europe.Professional starter/charger fitted with a heavy-duty transformer, flush mounted digital ammeter and variable charge rate controls. Features a fast-charg…

• Heavy-duty starter charger for the medium and large garage, workshop and bodyshop operation.• The SuperStart range caters for all requirements from cars right up to passenger service and commercial vehicles.• Large wheels for easy mobility and features digital display and switchable charge circuitry for accurate charge control.• Suitable for EFB stop/start batteries.• Made in Europe.Professional starter/charger fitted with a heavy-duty transformer, flush mounted digital ammeter and variable charge rate controls. Suitable for EFB stop/start batteries.• Max. Charge: 60A (40A EN). • Max. Start: 300A (200A EN). • 1.5kW Input (charge). • 6kW Input (start). • Battery Range: 30-450Ah. • Digital display. …

Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suitable for heavier garage use for engines up to 3L capacity. Built-in polarity protection. Features and Benefits • Max. Charge: 45A(30A EN). • Max. Start: 200A(210A EN). • 12/24V Output. • Battery Range: 30-500Ah. • Easy-to-read ammeter and illuminated power switch. • Suitable for heavier garage use for engines up to 3L capacity. • Built-in polarity protection. • Model No. SUPERBOOST200 Specifications Model No SUPERBOOST200 Brand: Sealey Ca…

• Max. Charge: 40A(25A EN).• Max. Start: 180A(120A EN).• 12/24V Output.• Battery Range: 20-400Ah.• Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries.• Models feature easy-to-read ammeters and illuminated power switches.• Circuitry is protected by a panel mounted fuse.• Suitable for heavier garage use for engines up to 3L capacity.• Built-in polarity protection.Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suitable for…

• Max. Charge: 30A(20A EN).• Max. Start: 160A(100A EN).• 12/24V Output.• Battery Range: 15-300Ah.• Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries.• Model features easy-to-read ammeters and illuminated power switches.• Circuitry is protected by a panel mounted fuse.• Suitable for fleet operators running cars and van derivatives.• Built-in polarity protection.Combination unit capable of both charging batteries and providing boost power to help start vehicles with flat batteries. Features easy-to-read ammeter and illuminated power switch. Dual output (12 and 24V) and circuitry is protected by a panel mounted fuse. Suitable for…

• Max. Charge: 100A(70A EN).• Max. Start: 660A(400A EN).• 46A Max. Input (start).• Battery Range: 50-1200Ah.• Polarity protected.• Heavy-duty starter/charger for professional garages, workshops and bodyshops.• Features fast-charge timer device to enable rapid battery recovery with reduced risk of boiling the battery.• Caters for all requirements from cars right up to light commercial vehicles.• Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control.Heavy-duty starter/charger for professional garages, workshops or bodyshops. Caters for all requirements from cars right up to light commercial vehicles. Includes a fast-charge time…

• Max. Charge: 95A(65A EN).• Max. Start: 560A(360A EN).• 44A Max. Input (start).• Battery Range: 50-1000Ah.• Polarity protected.• Heavy-duty starter/charger for professional garages, workshops and bodyshops.• Features fast-charge timer device to enable rapid battery recovery with reduced risk of boiling the battery.• Caters for all requirements from cars right up to commercial vehicles.• Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control.Heavy-duty starter/charger for professional garages, workshops or bodyshops. Caters for all requirements from cars right up to light commercial vehicles. Includes a fast-charge timer device to en…

• Max. Charge: 60A(40A EN).• Max. Start: 420A(280A EN).• 22A Max. Input (start).• Battery Range: 30-700Ah.• Polarity protected.• Heavy-duty starter/charger for professional garages, workshops and bodyshops.• Caters for all requirements from cars right up to light commercial vehicles.• Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control.Heavy-duty starter/charger for professional garages, workshops or bodyshops. Caters for all requirements from cars right up to light commercial vehicles. Features analogue ammeter, switchable charge circuitry for accurate charge control and large wheels for easy mobility.• Max. Charge: 60A(40A E…

• Max. Charge: 45A(30A EN).• Max. Start: 320A(220A EN).• 20A Max. Input (start).• Battery Range: 30-500Ah.• Polarity protected.• Heavy-duty starter/charger for professional garages, workshops and bodyshops.• Caters for all requirements from cars right up to light commercial vehicles.• Large wheels for easy mobility and features analogue ammeter and switchable charge circuitry for accurate charge control.Heavy-duty starter/charger for professional garages, workshops or bodyshops. Caters for all requirements from cars right up to light commercial vehicles. Features analogue ammeter, switchable charge circuitry for accurate charge control and large wheels for easy mobility.• Max. Charge: 45A(30A E…

Amorphous solar panel converts daylight directly into 12V electricity. Suitable for maintaining charge in a wide range of batteries and power packs. Ideal for batteries stored in boats and caravans and for batteries in vehicles in long-term storage. IP44 Rating (non-waterproof). For use behind car windscreen or other protection. Supplied with suction pad fixings, battery clips and vehicle accessory socket plug (only suitable for vehicles with “permanent live” accessory socket). Features and Benefits • Amorphous solar panels convert daylight directly into 12V electricity. • Suitable for maintaining charge in a wide range of batteries and power packs. • Ideal for batteries in boats, caravans …

Fully automatic microprocessor controlled battery charger and maintainer, featuring patented Speed Charge technology. Charges the battery up to three times faster than conventional battery chargers without damaging the battery. Heavy-duty sturdy case with no-nonsense controls and LED status indicators. Battery presets include conventional lead acid, calcium, AGM/GEL, leisure and stop/start batteries. Fully automatic float mode ensures the battery is kept fully charged, maintained and ready to use. This unit also features a 10A power supply mode for maintaining battery power during prolonged periods of power draw, for example when a vehicle is on display in a showroom etc. Features and Benefits …

• Output: 12/24V - 15/10A.• Battery Range: 40-230Ah Lead Acid.• Fully automatic multistage microprocessor controlled battery charger and maintainer.• Battery life and condition optimised by constantly monitored and adjusted charge output.• Sturdy case with protective bumpers and built-in hanging hook. • Scrolling digital display with various inbuilt language options.• Charge status LED.• Staged charging includes thermal runaway, integral ventilation and spark proofing for maximum safety.• Reverse polarity protection in case incorrectly connected to battery.• 2 Year guarantee*.Fully automatic multistage microprocessor controlled battery charger and maintainer. Sturdy case with protective bump…

• Output: 12V 10A.• Battery Range: Max. 230Ah Lead Acid.• Fully automatic microprocessor controlled dual voltage battery charger and maintainer.• Patented Speed Charge technology actively monitors the charge acceptance and constantly modifies the charge output.• Charges the battery up to 3 times faster than conventional battery chargers without damaging the battery.• Heavy-duty sturdy case, no-nonsense controls, bright, clear, easy-to-read LED status lights and LED scrolling digital messaging display screen gives step-by-step instructions.• Charges conventional lead acid, calcium, AGM/GEL, leisure and stop/start batteries.• Fully automatic float mode ensures that the battery is kept fully ch…

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Current: 5 A
Voltage: 12 …

Liquid crystal displayFor status monitoring and set-up
Load outputOver-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage. Some loads (especially inverters) can best be connected directly to the battery, and the inverter remote control connected to the load output. The connect and disconnect voltages are adjustable.
Day/night timing of the load outputThis option allows for a pre-set ON-time after dusk.
Programmable battery charge algorithmPreprogrammed algorithms for AGM, GEL, Flooded or LiFePO4 batteries (with internal BMS only).
Current (A): 10.0
Current: …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …

Bluetooth Smart built-in: dongle not needed
The wireless solution to set-up, monitor and update the controller using Apple and Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control GX, other GX products, PC or other devices.
Ultra-fast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30 % compared to PWM charge controllers and by up to 10 % compared to slower MPPT controllers.
Load output
Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect …

• Suitable for 12V & 24V electrical systems. • Fully electronic, microprocessor controlled.• Suitable for EFB & AGM/GEL (stop/start), Lead Acid, Lead Calcium & Silver Calcium batteries.• Battery Range: 4-350Ah.• Up to 10 analysis and charge phases, including trickle/maintenance.• Stabilised charging current allows improved charging efficiency and reduced charging times using ECS (Electronic Control Systems) technology.• Surge and spike protection during charging and starting.• BSU mode provides support for the battery during prolonged electronic diagnostic checks.Fully electronic, microprocessor controlled battery starter/charger designed to meet the requirements of modern battery technology. Suit…

The new chargers of the SBC NRG + MINI series are even more efficient and compact thanks to new advances in technology. The redevelopment of the SBC NRG + charger allows 15% more output power than the industry standard, because it uses the injected current with almost no loss. They are used everywhere, where smaller power with small dimensions are needed. Thanks to the temperature-dependent ventilation system, the chargers not only quieter, but also protect your on-board battery at the same time.
3-stage charging curve IUoU
2 or 3 charging outputs for independent charging of several batteries by integrated charging current distributor (MosFet technology)
Each output is protected with integrated …