Chargers & Jump Starters

Up to 150 A peak current: for transmitting the charging current to start almost completely discharged batteries Up to 1.6 litres: suitable for starting vehicles with a petrol engine with up to 1.6 litres displacement 75A continuous current: for continuous current transmission and to protect against overheating, a continuous current of 75A is given Copper coated aluminium cable Cable length: 2.5 metres

The world’s most efficient solar pulse charge system that can save your ‘dead’ battery and provide safe long term maintenance.

IDEAL FOR: STD, AGM & GEL 12V batteries from 10 – 160Ah and Lithium LFP 12.8V /13.2V batteries CHARGING AMPS: 3.3A from 40W panel (max average current) SAVE: Low Volt Start of 4V USE: Indoor / Outdoor (lowest temperature: -4°F / -20°C) Included accessories: 01 weatherproof permanent lead. 04 battery clamp lead. nylon storage case.

Victron Energy Smart IP43 24-Volt 25 amp 85-250V (3) features 3 isolated outputs (3 Bank) - All outputs can supply the full rated output current The Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used Bluetooth Smart enabled: Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available Automatic voltage compensation: The charger compensates for voltage drop over the DC cabling by slightly…

Victron Energy Smart IP43 24-Volt 16 amp 85-250V (1+1) features 2 isolated outputs - The second output, limited to approximately 3 amp and with a slightly lower output voltage, is intended to top up a starter battery The Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used Bluetooth Smart enabled: Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available Automatic voltage compensation: The char…

Victron Energy Smart IP43 12-Volt 50 amp 85-250V (3) features 3 isolated outputs (3 Bank) - All outputs can supply the full rated output current The Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used Bluetooth Smart enabled: Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available Automatic voltage compensation: The charger compensates for voltage drop over the DC cabling by slightly…

Victron Energy Smart IP43 12-Volt 30 amp 85-250V (3) features 3 isolated outputs (3 Bank) - All outputs can supply the full rated output current The Smart Charger features our well-known ‘adaptive’ battery management system that can be preset to suit different types of batteries. The ‘adaptive’ feature will automatically optimise the charge process relative to the way the battery is being used Bluetooth Smart enabled: Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available Automatic voltage compensation: The charger compensates for voltage drop over the DC cabling by slightly…

Victron Orion Smart 30A 12V DC to DC charger with Bluetooth connectivity Brand : Victron Energy Product type: BATTERY CHARGER Blue

The VE Skylla-i Control GX makes it possible to adjust the charging current of a Skylla-i battery charger By adjusting the charging current you limit the incoming current from the shore connection This model can be built in, but we prefer a mounting box Dimensions: 65 x 120 x 40 mm Weight: 0.30 kg International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Effective – jump start function for discharged car batteries Powerful - high charging current up to 70 A for fast charging Practical – special pockets for storing the included cables Variable - MIN/MAX switch for different charging levels Mobile - compact shape, wheels and handle for easy transport

Powerful - high charging current up to 27 A for fast charging Compatible - for batteries with a capacity of 20 - 48 Ah (12 V). 28 - 85 Ah (24 V) Practical – cable firmly installed in the device plus cable compartment Variable - MIN/MAX switch for different charging levels

Powerful - high charging current up to 27 A for fast charging Compatible - for batteries with a capacity of 20 - 48 Ah (12 V). 28 - 85 Ah (24 V) Practical – cable firmly installed in the device Variable - MIN/MAX switch for different charging levels Mobile - compact shape and handle for easy transport

The Victron Energy rubber damper can be used for the following series: Victron Energy BlueSmart IP65 charger 12/10, 12/15, 24/8 The IP65 charger is already protected against dust and splashes of water - now you can also protect it from accidental damage. This rubber damper protects your IP65 charger from bumps, knocks and scratches and helps extend its service life Grippy and shock absorbing construction Dimensions: 19 x 10.49 x 5.99 cm. Weight: 0.14 kg 5 year warranty

Victron Energy Quattro 48-Volt 5000VA 70 amp is a combined 230V inverter and battery charger, additionally it can be connected to two independent AC sources In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible Incorrect installation can be hazardous, Please …

Large clear, 4–digit LCD display with backlight Switchable Battery status is always in sight: battery status in Volt Batterieladestand than Balkenanzeige, defective Blitzsymbol charge display, as a faulty or tiefentladenen Battery Three different Anschlussoptionen: permanent Zigarettanzünder to BATTERY, SHORT ideal in cold weather for the prevention of accidents

IDEAL FOR: 12V lead-acid (STD / AGM / GEL) batteries 12.8V / 13.2V LiFePO4 batteries. NEW Pb & LFP batteries without BMS CHARGING AMPS: 0.2A to 5A variable (Ampmatic)

Ideal for: 12V lead-acid STD & AGM batteries from 3-240Ah and 12.8V/13.2V Lithium LFP (LiFePO4) batteries from 2-120Ah Charge mode for 12V lead-acid batteries, including wet and AGM Charge mode for 12.8V LiFePO4 (“Lithium” LFP) batteries Power Supply mode for battery support during vehicle diagnostics, tuning or troubleshooting

High power AccuMate for car, truck, bus & coach batteries IDEAL FOR : 12V & 24V STD, AGM, GEL lead-acid batteries, starter and deep cycle, from 17Ah (12V) or 9Ah (24V) up to 300Ah. LOW VOLT START: Low Volt Start of 3V for 12V / 16V for 24V batteries. CHARGING AMPS : 3.5A (24V) / 7A (12V) (temperature compensated) Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

For Telwin welding machines Compatible with other brand welding machines Suitable for Co2 and Argon Gauge scale 0-315 Bar. flow meter scale 0 - 12 L/min Can be used with refillable cylinders

Charging in 12 volt free mode: 2 A/14.4 V Charging in 12 V fast mode: 4 A / 14.4 V Charging in winter mode: 4 A / 14.7 V The device is equipped with protection against short circuit, overload and reverse polarity.

Selection of charging current: 2 A / 8 A / 15 A Choice of battery type: STD / AGM / CAL ✅ Intelligent portable charger for charging 12 volt acid, gel, AGM and MF batteries. Power supply 230 V, charging voltage 12 V, charging current 2/8/15 A.