Chargers & Jump Starters

Over 40 years’ experience bringing the latest technology to trade and retail markets. Exports to over 70 countries worldwide. Item Package Weight: 11.299 kg Item Package Dimension: 32.2cm L x 31.4cm W x 26.8cm H

Victron Energy Quattro 48-Volt 5000VA 70 amp is a combined 230V inverter and battery charger, additionally it can be connected to two independent AC sources In the event of grid failure, Victron Energy Quattro takes over the supply to the connected loads. This happens so fast that computers and other electronic equipment will continue to operate With the unique Power Assist feature Victron Energy Quattro will prevent overload of a limited AC source, such as a generator or shore power connection Up to 6 Victron Energy Quattros can operate in parallel to achieve virtually unlimited power, three phase or split phase operations are also possible Incorrect installation can be hazardous, Please …

IDEAL FOR: 12V lead-acid (STD / AGM / GEL) batteries 12.8V / 13.2V LiFePO4 batteries. NEW Pb & LFP batteries without BMS CHARGING AMPS: 0.2A to 5A variable (Ampmatic)

Ideal for: 12V lead-acid STD & AGM batteries from 3-240Ah and 12.8V/13.2V Lithium LFP (LiFePO4) batteries from 2-120Ah Charge mode for 12V lead-acid batteries, including wet and AGM Charge mode for 12.8V LiFePO4 (“Lithium” LFP) batteries Power Supply mode for battery support during vehicle diagnostics, tuning or troubleshooting

High power AccuMate for car, truck, bus & coach batteries IDEAL FOR : 12V & 24V STD, AGM, GEL lead-acid batteries, starter and deep cycle, from 17Ah (12V) or 9Ah (24V) up to 300Ah. LOW VOLT START: Low Volt Start of 3V for 12V / 16V for 24V batteries. CHARGING AMPS : 3.5A (24V) / 7A (12V) (temperature compensated) Included Accessories: O1 Weatherproof Eyelet Lead. O4 Clamp Lead for bench charging

For Telwin welding machines Compatible with other brand welding machines Suitable for Co2 and Argon Gauge scale 0-315 Bar. flow meter scale 0 - 12 L/min Can be used with refillable cylinders

HIGH PERFORMANCE - 2 x 22Ah AGM batteries housed in robust anti-shock casing, specially formulated to jump-start engines up to 5L diesel and 8L petrol. DIGITAL VOLTMETER – Easy to read digital voltmeter which can also be used to check the voltage of the vehicle’s alternator. SPARK FREE SWITCH - 0/12/24V rotary switch for spark-free connection. SUPPLIED – Supplied with fully isolated industrial grade brass clamps, 100% pure copper cables. SAFETY FEATURES - Reverse polarity alarm, both visual and audible and short circuit protection system. 12V OUTPUT SOCKET - 12V Output socket can be used as a memory saver, as well as powering accessories such as mini compressors. SUPPLIED – Supplied with an …

Charging in 12 volt free mode: 2 A/14.4 V Charging in 12 V fast mode: 4 A / 14.4 V Charging in winter mode: 4 A / 14.7 V The device is equipped with protection against short circuit, overload and reverse polarity.

Selection of charging current: 2 A / 8 A / 15 A Choice of battery type: STD / AGM / CAL ✅ Intelligent portable charger for charging 12 volt acid, gel, AGM and MF batteries. Power supply 230 V, charging voltage 12 V, charging current 2/8/15 A.

AW401

Item Category: Power Inverter Item Trademark: Victron Energy manufacturer: Victron Energy

5 Output Battery Charger for Boat Two outputs to charge 2 battery banks. The second output, limited to approximately 4 Amp and with a slightly lower output voltage, is intended to top up a starter battery Built-in Bluetooth Smart set-up allow you to monitor, control, update and synchronise Victron Energy Phoenix Smart IP43 Charger Automatic voltage compensation - The charger compensates for voltage drop over the DC cabling by slightly increasing output voltage when the DC current increases AC-connection IEC 320 C14 inlet with retainer clip is included (AC cord sold separately)

Victron Lynx Power-In w/M10 Terminals [LYN020102010]

Professional DC to DC Charger: The Orion-Tr Smart DC-DC Charger is a professional charger that uses three stages to efficiently and safely charge your batteries. Dual Battery Charging: The Victron DC to DC charger is ideal for vehicles or boats where the alternator and start battery are used to charge the service battery. Built-in Bluetooth: The DC to DC charger can be monitored and cotrolled with smartphone or tablet via Bluetooth and the VictronConnect App. This allows you to see the charger's status and make adjustments as needed. Flexible Power Solution: The DC DC charger is suitable for both lead acid and lithium batteries and unlimited multiple units can be connected in parallel to …

Bluetooth Smart enabled Fully programmable, Remote on-off All models are short circuit proof and can be paralleled to increase output current High temperature protected, IP43 protection Screw terminals, Input fuse (not replaceable)

Bluetooth Smart enabled Adaptive 3-stage charge algorithm: bulk ? absorption ? float Remote on-off IP43 protection High temperature protected

High efficiency, IP43 protection, Screw terminals Technical Specification: Input voltage range - 18-35V, Output voltage - 12.5V, Efficiency - 97%, Continuous output current - 10A, Max. Output current - 12A, Galvanic isolation - no, Operating temperature range (derate 3% per °C above 40°C) - -20 to +55°C, DC connection - Screw terminals Dimensions: Height - 73mm, Width - 94mm, Depth - 37mm, Weight - 0.2kg 5 Year Warranty

CHARGE YOUR 12V BATTERY FROM ANOTHER 12V BATTERY! NO AC POWER REQUIRED!Recharge your trailered motorcycle, ATV or speed boat’s battery on the way to the venue! SAVE: Low Volt Start of 1V. CHARGING AMPS: 2A. Model TM-500 IDEAL FOR: STD, AGM & GEL 12V batteries from 3 – 96Ah. USE: Indoor / Outdoor (lowest temperature: -4°F / -20°C). STYLE: Weatherproof case with wall mounts, with 6ft / 180cm AC supply lead and 6ft / 180cm charge lead ending in SAE connector. Weatherproof battery lead, standard battery clip set & fused battery clip set included. INPUT: 12-16 V, 2.7A max,

Victron Quattro Combo Charger Inverter Product Type: POWER INVERTER Brand: Victron Energy