Other Sound & Hi-Fi MONACOR

This High-power Mono level control has a push-on knob with 10mm thread. The Peak current is at 100WMAX, and the Attenuation direction counterclockwise. Technical Specification Impedance 8ohm ±20% Attenuation direction counterclockwise Turning angle 300° ±5° Attenuation 0dB up to ∞dB Channels mono Peak current 100WMAX

High-End Speaker Technology matching the SPH-... series, coated special cone with highly dampening dust cap and extra flat basket (does not have to be recessed!), top linearity, perfect mass-drive ratio with a wide bandwidth, HiFi for highest requirements. Technical Specifications: Impedance (Z) 8ohm Resonant frequency (fs) 85Hz Max. frequency range fx-10,000Hz Rec. crossover freq. (fmax.) 300/5,000Hz Music power 120WMAX (400-5,000Hz) Power rating (P) 50WRMS SPL (1W/1m) 89dB Suspension compl. (Cms) 0.8mm/N Moving mass (Mms) 4.5g Mech. Q factor (Qms) 1.98 Electr. Q factor (Qes) 0.55 Total Q factor (Qts) 0.43 Equivalent volume (Vas) 4 l DC resistance (Re) 6.3ohm Voice coil induct. (Le) 0.3mH …

Variable adapter piece for stand inserts with standard diameter. Black lacquered steel tube version Height can be adjusted in 5 steps (86-134cm), with locking pin Load capacity: 30kg Weight: 1.9kg

Wall support for standard wooden speaker systems black lacquered, movable (approx. 150°) and tiltable (approx. 30°). Adjustable support area for speaker systems (195-360mm). Supplied with locking screws for speaker systems. Load capacity: 15kg. Safety Note To be installed by experts only! Pay attention to precise screw connection! Please use suitable safety ropes!

PAST-88/SW Wall Support For PA Speaker System Wall Support For PA Speaker Systems A black lacquered finish adds a premium look to the support. The support is movable (approx. 150°) and tiltable (approx. 20°) and can be locked with setscrews. Fixing bolt for accepting e.g. PA speaker systems with stand insert as well as carrier plates and adapter plates. Distance between fixing bolt and mounting plate: 285mm Total length: 310mm Load capacity: 20kg Safety Note To be installed by experts only! Pay attention to precise screw connection! Please use suitable safety ropes!

Universal speaker, 40W Max, 4ohm For general applications up to the PA range, wide bandwidth radiation, 20WRMS. Technical Specification Impedance 4ohm Music power 40WMAX Power rating 20WRMS Mounting cutout Ø 120mm Mounting depth 60mm Magnet diameter 79mm Dimensions 128x128mm Weight 620g

Universal speaker, 60WMAX, 4ohm For general and replacement purposes, of quite high power capability, to be used in the bass-midrange, 30WRMS. Technical Specification Impedance 4ohm Music power 60WMAX Power rating 30WRMS Mounting cutout Ø 147mm Mounting depth 79mm Magnet diameter 100mm Dimensions Ø 169mm Weight 1.07kg

A very talented 2-way speaker, thanks to a very clean reproduction of the midrange. Despite a very attractive price, the SP-202E from MONACOR is ideally suited for 2-way applications and promises an excellent sound quality.
Hi-fi bass-midrange speaker, 50 W, 4 Ω
All-round speaker
Foam surround
Replacement speaker for closed speaker systems
Impedance: 4 Ohm
Made in: China
Diameter: 8"
Woofer: 8"
Weight: 1,4 kg
Frequency Range: f3 - 6 kHz
Power: 100 W
Power RMS (Watt): 50.0
Power RMS: 50 W
Power (Watt): 100.0
Sound Pressure Level - SPL (dB): 93.0
Тype: PA

Universal Bass-Midrange Speaker, 100W Max, 8ohm Suitable for bass-midrange applications, also in power speaker systems. Technical Specification Impedance (Z) 8Ω Resonant frequency (fs) 68Hz Max. frequency range f3-4,500Hz Music power 100WMAX Power rating (P) 50WRMS SPL (1W/1m) 91dB Magnet weight 570g Type of speaker Mounting cutout Ø 185mm Mounting depth 90mm Dimensions Ø 200mm Weight 1.3kg

Bass speaker, 200WMAX, 8ohm With drilled pole core and great linear excursion for powerful bass reproductions. Technical Specification Impedance (Z) 8ohm Resonant frequency (fs) 33Hz Max. frequency range f3-4,000Hz Music power 200WMAX Power rating (P) 100WRMS SPL (1W/1m) 94dB Suspension compl. (Cms) 0.69mm/N Moving mass (Mms) 33g Mech. Q factor (Qms) 2.33 Electr. Q factor (Qes) 0.38 Total Q factor (Qts) 0.33 Equivalent volume (Vas) 115 l DC resistance (Re) 6.5ohm Force factor (BxL) 10.8Tm Voice coil induct. (Le) 1.2mH Voice coil diameter 50mm Voice coil former aluminium Linear excursion (XMAX) ±3.5mm Eff. cone area (Sd) 346cm2 Magnet weight 1.1kg Weight 3.9kg

Bass speaker, 200WMAX, 8ohm With drilled pole core and stable paper cone for bass reproduction of high power rating for universal applications. Technical Specification Impedance (Z) 8ohm Resonant frequency (fs) 30Hz Max. frequency range f3-4,000Hz Music power 200WMAX Power rating (P) 100WRMS SPL (1W/1m) 96dB Suspension compl. (Cms) 0.77mm/N Moving mass (Mms) 42g Mech. Q factor (Qms) 1.74 Electr. Q factor (Qes) 0.37 Total Q factor (Qts) 0.31 Equivalent volume (Vas) 266 l DC resistance (Re) 6.5ohm Force factor (BxL) 11.7Tm Voice coil induct. (Le) 0.8mH Voice coil diameter 50mm Voice coil former aluminium Linear excursion (XMAX) ±2.5mm Eff. cone area (Sd) 495cm2 Magnet weight 1.2kg Weight 4.1…

Universal bass speaker, 200WMAX, 8ohm Suitable for bass applications, also in power speaker systems. Impedance (Z) 8ohm Resonant frequency (fs) 45Hz Max. frequency range f3-4,000Hz Music power 200WMAX Power rating (P) 100WRMS SPL (1W/1m) 90dB Magnet weight 850g Type of speaker Mounting cutout Ø 280mm Mounting depth 125mm Dimensions Ø 303mm Weight 2.3kg

SPH-165 HiFi bass-midrange speaker, 100WMAX 50W RMS, 8 Ohm Especially strong drive and high power capability, suitable for all universal HiFi applications of high requirements, very well suited for bass-reflex and band pass cabinets up to horn combinations. Technical Specification Impedance (Z) 8 Ohm Resonant frequency (fs)33Hz Max. frequency range f3-5,000Hz Rec. crossover freq. (fmax.)3,500Hz Music power 100WMAX Power rating (P) 50WRMS SPL (1W/1m)89dB Suspension compl. (Cms)1.22mm/N Moving mass (Mms)16g Mech. resistance (Rms)1.6kg/s Mech. Q factor (Qms)2.02 Electr. Q factor (Qes)0.23 Total Q factor (Qts)0.21 Equivalent volume (Vas)36 l DC resistance (Re)6.…

Midrange Speaker Especially high-quality HiFi bass speakers and HiFi bass-midrange speakers of perfect manufacturing quality and elegant design, with aluminium basket, carbon fibre cone and especially long excursion, an impulsive bass reproduction of low fundamental resonance of partly surprisingly small cabinets. High-end bass-midrange speaker, 120WMAX, 8Ω, with an excellently dampened cone and extra long excursion, remarkably low distortion for a particularly natural reproduction, very low limit frequency, especially suitable as a bass-midrange speaker in 2-way combinations, yet small volume requirements. Technical Specification Impedance (Z) 8Ω Resonant frequency (fs) 38Hz Max.…

Monacor MS-15 Swivel Arm Microphone Stand Black lacquered metal version Supplied with screw clamp (width: up to 55mm) and mounting base Can be adjusted as desired due to 3-joint set-up with tension screws and locking screws Thread: 16mm ( 5/8 ") 5m connection cable with XLR inline jack and XLR plug Length of the arm segments: 460mm and 500mm