Quick release drill chucks

Enables a 1/2" x 20 Threads Female threaded chuck to be fitted to an SDS drill. Not to be used on hammer action.

This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.Additional Information:• Chuck Type: Adaptor

Designed to convert M14 paddles for use with SDS+ drills. Features and Benefits • Converts M14 thread paddles for use with SDS+ drills Contents 1 x M14 to SDS+ Adaptor

Faithfull heavy-Duty keyed chuck for use on both Rotary and Impact drills. Fitted with an anti-thrust bearing to increase the amount of grip and to prevent slipping when under load. Designed in accordance to DIN 6349The FAICHUCK12 comes complete with key and adaptor for use with SDS and SDS Plus machines.When used with SDS machines, the drill MUST NOT be used in hammer mode1/2in x 20 UNF thread. Capacity 13mmComplete with chuck key.Additional Information:• Chuck Type: Chuck & Key• Keyed/Keyless: Keyed

Keyless Chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes and features a non-slip locking system. It is supplied with a removable adaptor which enables it to be affixed to SDS Plus machines (for rotary only applications; not suitable for hammer drilling). Contents • Keyless Chuck (13mm capacity, 1/2" x 20UNF, female thread) • SDS Plus Adaptor

These handy adaptors will convert your SDS drill into a useful tool for setting and removing nuts, bolts and coach bolts. The adaptors cover three common drive sizes - 1/4in, 3/8in and 1/2in and are an ideal labour saving device when quantities of bolts or nuts are being used, making light work of this type of repetitive task. SDS Plus to 1/4in SD.SDS Plus to 3/8in SD.SDS Plus to 1/2in SD. Features: For setting and removing nuts, bolts and coach bolts Machine must be fitted with a safety clutch Machine must be fitted with a safety clutch For rotary use only Specifications: Dimensions: H:15.5 x W:3.0 x D:10.4 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAISDSOCSDS

Central pilot drive adaptor for Armeg EBS Square Cutter.Recommended Uses:• For ease of replacement it is recommended to use a vice and a torque wrench set to 90 Nm2• Retain brass nut when changing the Adaptor and reuse• The square cutter should feel loose when fitted correctly to allow hammer action to work effectively• Always keep SDS shank well greased

Central pilot drive adaptor for Armeg EBS Round Cutter (without dust collection).Recommended Uses:• For ease of replacement it is recommended to use a vice• Always keep SDS shank well greased

DeWalt SDS Plus Drill Chuck Adaptor. Features & Benefits • Drilling accessory Specifications • Manufacturer Code: DT7030-QZ

A 12mm diameter x 450mm long BOSCH SDS-Plus Drill Bit for drilling in masonry, concrete and reinforced concrete. The “turn angle” head and 4-flute design provides fast dust removal so the drill bit can quickly slice through concrete and rebar with reduced wear. This SDS drill bit has a working length of 400mm. It is compatible with all SDS plus rotary hammer drills.

A 10mm diameter x 450mm long BOSCH SDS-Plus Drill Bit for drilling in masonry, concrete and reinforced concrete. The “turn angle” head and 4-flute design provides fast dust removal so the drill bit can quickly slice through concrete and rebar with reduced wear. This SDS drill bit has a working length of 400mm. It is compatible with all SDS plus rotary hammer drills.

A BOSCH SDS Plus Chuck Key and Adaptor with 1.5 - 13mm opening.

Heavy duty steel drill chuck with knurled grips and black finish. Suitable for use with mains powered and cordless machines. Keyless mechanism for quick & easy accessory changes. Supplied with a removable adaptor which enables it to be affixed to SDS Plus machines (for rotary only applications. Not suitable for hammer drilling) Contents • Keyless Chuck (13mm capacity, 1/2" x 20UNF, female thread) • SDS Plus Adaptor

Versa Extreme Scour Pad (PC368-3).Features:Tackle the removal of burnt-on food on cast iron pans and remove rust or stock with ease with the Extreme Scour Pad.The cleaning pad made of Silicon Carbide lets you quickly cut through and remove tough stuck-on messes.Usable in both dry and wet applications, the pad is great for deep cleaning indoors and outdoors.Clean more with less effort, thanks to its large surface area and your Dremel® Vers´s high rotation speed minimizing time and effort spent on scrubbing tasks.*Not recommended for aluminium, stainless steel, copper, coated nonstick cookware, non-tempered glass or aquarium as it will scratch the surface.Material:Dremel Versa Extreme Scour Pa…

This SDS Plus shank chuck adaptor has a 1/2" x 20 UNF thread which enables a drill chuck to be mounted for using standard drill bits in an SDS rotary hammer drill. It also features an integrated 1/4" hex bit holder, so it can alternatively be used as an SDS Plus screwdriver bit holder. Please note this adaptor should not be used in hammer mode. Features and Benefits • SDS Plus screwdriver bit holder and chuck adaptor in one • Thread for mounting a drill chuck • Integrated 1/4" hex screwdriver bit holder • Enables a wide variety of accessories to be used in an SDS drill Specifications • Shank: SDS Plus • Thread: 1/2" x UNF Male (Requires 1/2" x 20 UNF Female Chuck) …

Central pilot adaptor for Armeg EBS Round Cutter (Designed for use with Round Cutter assembled with Dust Collection Unit) Recommended Uses: Thermolite Block, Medium Density Block (Breeze), Soft Brick, For ease of replacement it is recommended to use a vice All SDS shanks should be greased prior to and during use to prevent breakage by heat build-up

Highly Robust - The SDS plus Adapter is highly robust and is specially designed to withstand the high power of rotary hammers. Its S2 Modified Steel and optimised heat-treatment process provide the adapter with extra endurance for high performance, making it extremely sturdy for long-lasting work. This makes the product ideal for heavy-duty screw-driving applications such as plant installations or heavy industrial work. . It fits on 1/2-inch external square drive and is suitable for rotary hammers with SDS plus shank systems Fits all SDS plus rotary hammer drills. Features and Benefits: • Highly Robust • The SDS plus Adapter is highly robust and is specially designed to withstand …

Connects SDS Plus drill bits, adaptors and extensions to SDS Max machines. Features & Benefits: • Connects SDS Plus drill bits, adaptors and extensions to SDS Max machines. • Model No. B3S Specifications: Model No B3S Brand: Sealey

The Toolholder with female shank is designed for hollow drill bit core cutters. It is intended for use with M16 threads. Bosch SDS-plus Shanks for Core Cutters.

The Faithfull SDS Max to SDS Plus Adaptor, with a 225mm overall length, enables the use of all SDS-plus shanked drill accessories with an SDS-Max machine. Specification: Overall Length: 225mm. Additional Information:• Chuck Type: Adaptor

This keyless chuck and adaptor set from Makita converts SDS Plus hammer drills into a keyless 3 jaw chuck that allows the use of straight shank drill bits. Features and Benefits • Converts SDS Plus Rotary Hammer Drill to a keyless 3 jaw chuck • Allows the use of straight shank bits • Easy hand locking system • Accepts drill bits with a shank of up to 13mm • Suitable for use with Makita SDS Hammer Drills • Bosch Equivalent: 2608572227 • Keyless Chuck Specifications • Description: Keyless Chuck • Diameter: 13mm • Shank: SDS Plus • Pack Quantity: 1

Without Additional Tools - The Keyless SDS plus Quick-Change Chuck is a Bosch System Chuck that easily mounts and dismounts without additional tools. It is compatible with Bosch Rotary Hammers. Features and Benefits: • Easily Mounts and Dismounts Without Additional Tools • Keyless SDS plus Quick-Change Chuck is a Bosch System Chuck that easily mounts and dismounts without additional tools • Compatible with Bosch Rotary Hammers Specifications: Chuck capacity: SDS plusmm Mount, range: SDS Drill chuck, type: Keyless chuck

SDS plus quick-change chuck.The Keyless SDS plus Quick-Change Chuck is a Bosch System Chuck that easily mounts and dismounts without additional tools.It is compatible with Bosch Rotary Hammers.Material:Quick-Change Collet Chuck GBH4 SDS-P SSB.

This Product Is A Replacement Accessory For Sds Plus Corecutters. For A Strong Power Transfer, The One-Piece Adapter Attaches Very Firmly Into The Tool Holder. It Is Compatible With Sds Plus Shank Systems. Follow Maintenance Instructions: Remove Dirt, Grease Lightly And Only Use The Grease Included With The Hammer.Specifications:- Shank Shape: Sds-Plus Shank- Length: 175 Mm