Drill Chucks Wera

Torsion bits for Pozidriv screws with elastic Torsion zone - where kinetic energy is diverted from peak loads - and softer BiTorsion zone to prevent the bit tip from twisting under peak loads. This greatly extends the product service life. This provides the best possible durability together with the matching holder. Extra-hard; ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Suitable for Pozidriv screws • BiTorsion zone to absorb peak loads • Considerable reduction in the risk of breakage, significant increase in service life • Particularly hard for semi-hard materials • 1/4" hexagon drive (Wera connecting series 4) Contents 855/4 B…

Tough viscous Wera bits for hexagon socket screws and universal use. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.Features and Benefits• For socket head screws• Ductile and tough for hard materials• Hex-Plus allows socket head screws to live longer• 1/4" hexagon drive (Wera connecting series 1)• Suitable for Bosch, Fein, Holz-Her, Lecreux, MetaboContents840/1 Z bits, 3/32" x 25 mm

High quality bits out of stainless steel for hexagon socket screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • For socket head screws • Stainless Steel Bits • Solution to the extraneous r…

High quality bits for recessed TORX® screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Particularly suitable for use with customary impact drivers. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • For recessed TORX® screws • Impaktor technology for above-average service life • Particularly suitable for use with customary impact drivers • Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out • 1/4" hex…

Tough viscous Wera bits for hexagon socket screws and universal use. Hex-Plus offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Hexagon socket BO screws have a protruding pin in their drive profile. This prevents any unauthorised loosening since the “normal" hex tools cannot move these screws. 1/4" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.Features and Benefits• For socket head screws• Ductile and tough for hard materials• Hex-Plus allows socket head screws to live longer• 1/4" hexagon drive (Wera connecting series 1)• Suitable for Bosch, F…

High quality metal twist drill bits for precise drilling in metal. Made out of high speed steel (HSS). A finely-tuned material elasticity provides for a long service life. Very good concentricity. Tough viscous tempered bits ensure a particularly long service life. The hexagonal shaft ensures very good power transfer. Drive: ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits • Twist bit for metal applications • Hex shaft for very good power transfer • HSS = high speed steel with split point • Finely-tuned material elasticity for great durability • Very good concentricity Contents 848 HSS Metal Twist Drill Bits, 3 x 38 mm

Premium bitholding screwdriver. Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3. Features and Benefits • Bit holder for bits with 1/4" hexagon drive • Ergonomic Kraftform handle • Hexagonal anti-roll feature against rolling away • Magnetic Contents 813 Bitholding screwdriver, 1/4" x 78 mm

For recessed TORX screws
Ductile and tough for hard materials
1/4" hexagon drive,Wera connecting series 1

Screw gripper set: attachment tool with holding function for screws. Holds all screw profiles securely on the tool. During the job, the gripper can be pushed up along the blade so that it is not in the way when working with low-lying screws. Features and Benefits • Screw gripper set • Attachment tool with holding function for screws • Holds all screw profiles and sizes securely on the tool • Made out of stable, elastomer material Contents 1x 1440/1442 Screw gripper set, 2 pieces; 1x 1440 Screw Gripper: 4.5-6.0x41.0; 1x 1442 Screw Gripper: 6.0-8.5x41.0

Premium bitholding screwdriver. The Rapidaptor quick-release chuck allows for lightning-fast bit changes without any extra tools. The strong permanent magnet holds the bits firmly. Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. Suitable for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173).Features and Benefits• Bit holder with Rapidaptor quick-release chuck for bits with 1/4" hexagon drive• Multi-component Kraftform handle for fast and ergonomic screwdriving• Hexagonal anti-roll feature against …

Bit-Set / Screw Type TORX / Metal

Universal holder for the take-up of bits with ¼" hex head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. The particularly strong retaining ring ensures an optimum fixing of the tool in the holder. The especially strong permanent magnet makes sure that the bits are held absolutely securely. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Universal holder for the take-up of bits with 1/4" hexagon head drive • Stainless sleeve, retaining ring and strong permanent magnet • 1/4" hexagon drive (Wera connecting series 4) • Strong retaining ring for optimum fit of the tool in the holder • Strong permanent ma…

Adaptor from square to hexagonal. Comes with quick-release chuck for rapid bit change. Suitable for the attachment of bits with 5/16" hexagon drive as per DIN ISO 1173-C 8.Drive: 1/2" square. Features and Benefits • 1/2" adaptor with quick-release chuck • Suitable for bits with 5/16" hexagon drive (Wera connecting series 2) • 1/2" square socket drive • Equipped with ball stop groove Contents 784 C 1/2" Adaptor with quick-release chuck, 784 C/2 x 5/16" x 50 mm

Connector from square head to hexagonal. For 1/4" hexagon bits as per DIN ISO 1173-C 6.3 and E 6.3 and Wera connection series 1 and 4. With quick-release chuck. Features and Benefits • 3/8" Zyklop adaptor with quick-release chuck for rapid bit change • Suitable for 1/4" hex bits (Wera connecting series 1 and 4) • Chrome vanadium steel Contents 8784 B1 Zyklop bit adaptor, 3/8", 1/4" x 3/8" x 44 mm

Universal holder for the take-up of bits with ¼" hex head drive as per DIN ISO 1173-C 6.3. Stainless sleeve for special corrosion protection. The particularly strong retaining ring ensures an optimum fixing of the tool in the holder. The especially strong permanent magnet makes sure that the bits are held absolutely securely. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3. Features and Benefits • Universal holder for the take-up of bits with 1/4" hexagon head drive • Stainless sleeve, retaining ring and strong permanent magnet • 1/4" hexagon drive (Wera connecting series 4) • Strong retaining ring for optimum fit of the tool in the holder • Strong permanent ma…

High quality bit holder. The telescopic bayonet blade, which can be lowered into the handle, together with the quick-release chuck allows fast manual work even in confined installation situations. The Rapidaptor quick-release chuck enables rapid bit change without needing any special tools. The strong permanent magnet holds the bits absolutely securely. Kraftform Plus handle for pleasant, ergonomic working that makes blisters and calluses a thing of the past. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with ¼" hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). Features and Benefits • Bit holder with Rapidaptor q…

Rapidaptor universal holder for bits with 1/4" external hexagon drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The Rapidaptor allows mounting the bits without using the sleeve. The bit is removed by simply pushing it forward - for lightning-fast bit changes, even with just one hand. The strong permanent magnet holds the bits firmly. 1/4" hexagonal, suitable for screwdriver machines with mounting as per DIN ISO 1173-F 6.3. Features and Benefits • Rapidaptor technology for rapid bit change • Rapidaptor universal holder for bits with 1/4" hexagon drive, magnetic • 1/4" hexagon drive Contents 889/4 R Rapidaptor Universal Bit Holder, 1/4" x 100 mm

Ideal for mobile repair and assembly work
Rapidaptor holder for rapid bit change
1/4" drive,suitable for power screwdrivers
Rapidaptor universal holder, non-magnetic, and tapping drill bits with 1/4" drive
In practical and robust plastic box

Tap bit set with relevant material elasticity for longer service life with very good centring characteristics and outstanding shaving removal.
Contents: 1 x Each item Diameter: 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm.
In a handy and robust box
Color: Silver
Rapidaptor with quick-release chuck allows for quick one-handed bit exchange both insert and power bits
Includes Kraftform bitholding screwdriver, Rapidaptor Unversal bit holder with quick-release chuck and 6 - 1/4" hex drive countersink bits.
Laser etched marking on bit allows for easy drive tip identification

8-piece countersink bit set in a stable plastic box for countersinking and deburring. The hexagonal shaft ensures very good power transfer. Ensures rattle and score-free working. Perfect chip removal and great durability. High quality, ergonomic bit holder equipped with a magnet. The Rapidaptor ensures rapid bit change without any extra tools. For insertion in the power screwdriver or for use in the chuck of the electric drill. Features and Benefits • Ideal for mobile repair and assembly work • Rapid, uncomplicated change between drill, countersinking or screwdriving bit • 1/4" drive suitable for power screwdrivers • For countersinking and deburring • 1-flute Contents …

Bit-Set / 40 Piece / Steel

Wera Tools 855/1 BTZ PZ2/25 Extra Tough BitBiTorsion bits for Pozidriv screw with the torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard design. 1/4" hexagonal suitable for holding tools as per DIN ISO 1173-D 6.3.WER30790A: PZ1/25mmWER30790B: PZ2/25mm

Tool shaft for manual nutsetter inserts; with ball. Output: 1/4" square head; drive 1/4" hexagon.Features & Benefits:• Adaptor for machine-operated nut spinner sockets• 1/4" external square• 1/4" hexagon drive (Wera connecting series 4)• With ballContents:1x 870/4 SB, 1/4" x 50 mm; 1x 870/4 Adaptor, 1/4" x 50 mm