Bike Accessories

Front / 26 inch

##Park Tool Crank Wrench and Puller The CWP-6 is a compact crank puller with a built-in 8mm hex for removing crank bolt. Includes two rotating tips (11.3 mm and 16.3 mm) so it can be used to remove splined Octalink and ISIS Drive crank arms, as well as square-holed crank arms. A must have multi-fit crank puller for the home mechanic.

Sprocket Remover / Use Sprocket release / Steel

Chainring Tool / Use Chainring bolts attachment or detachment / Steel

Bike Mirror / Handlebar Mounted Method of Attachment / City / 75 g / Plastic

##Blackburn Multi Bar End Mirror Designed for commuting and touring, attaching to the handlebar, the Blackburn Multi Bar End Mirror allows you to see potential hazards from behind, whether that be on or off road. The oval convex mirror provides a wide field of vision and is fully adjustable so you can place it in the perfect position. Quick and easy to mount onto a wide range of handlebars using a sturdy, vibration proof mount.

Bike Oil / 15 ml

No matter where you are, in the city, the woods or the field, the SKS Velo 42 Urban is the ideal companion to keep you dirt-free and dry. The 28 snap-on mudguard set can be mounted to frame tubes of 25 to 35 mm diameter. For an extra secure mounting of the rear mudguard we also offer a Ø 3,4 mm stainless steel U-stay as optional accessory.Specifications:- material: plastic- weight: 170 g- max. outer diameter: 35 mm- wheel size: 28 ´´- tyre width: 1.1´´-1.5´´ 38- length front fender: 715 mm- length rear fender: 870 mm

Rotor 30mm Bearing Kit For BB30 Frames - Steel Install your Rotor, or other 30mm cranks into any BB30 or BBright CA frame with this Rotor 30mm Bearing Kit For BB30 Frames - Steel for supreme spinning efficiency. These bearings, like all Rotor products, are built to last. The steel composition is incredibly durable for miles of riding. Also included are all of the required labyrinth secondary seals and retaining spring clips, so all you need to get going is some grease and a bearing press.

Cone Wrench

Front

Park Tool 3 Way Internal Nipple Wrench, Square Drive, 5mm, 5.5mm Adjusting nipple and spoke tension on deep-section rims can be a laborious process. Not with the Park Tool 3 Way Internal Nipple Wrench tool, Square Drive, 5mm, 5.5mm. With its extra-long socket length and square drive design, this wrench can easily reach onto what can otherwise be a tough place to get to. With a square drive, 5 and 5.5-millimetre socket adjusting rim tension will no longer be a strenuous job.

Front

Stan's NoTubes DART Puncture Repair Tool The DART Repair Tool from Stan’s NoTubes is a puncture plug system for tubeless tyres that reacts with the sealant as well as physically blocking the hole in order to form a more effective repair. The DART has a barbed tip that holds it in place rather than relying on a tight fit, and the material used is less damaging to rims and rim tape than some alternatives. No trimming is required and the excess material won’t be felt even when used with high-pressure road tyres. The tool holds four DARTs (two are included with this tool) in a lightweight and ergonomic design which allows for precise application of the plug without any risk of damaging the …

##BBB MTBProtector Mudguard Both the front (BFD-13F) and rear (BFD-13R) mudguards from BBB features the TPR mud flap and is constructed from a strong two-tone composite material.

Sprocket Remover / Use Sprocket release / Steel

Repair Stand Accessory

SCHWALBE Rim Tape Tubeless To seal conventional wheels for tubeless use application .Easy to use and very high pressure-resistant. A single layer is even enough on road bikes. 10 m long 19mm wide Specifications:- Group: Rim Tape- Size: 10m / 19mm- Primary Base Color: Blue- Type: Tubeless

This chain guide increases chain tension on frames with vertical dropouts and is especially suitable for single-speed use.Features:- Suitable for single-speed hubs- Not suitable for coasterbrake hubs- Mount: Derailleur hangerSpecifications:- Material: Aluminum 6061-T6 CNC

Our TCS AL valves make your bike look cooler, so you should buy them. They also shed grams.Specifications:- Length: 46 mm

Saddle Care / Seatpost / 50 ml

Professional quality T-Handle star-shaped wrench built for speed, efficiency, leverage and a perfect fit.Features:- Carefully selected combination of Chrome Vanadium and S-2 tool steels - Unique anodized aluminum Speed Spinner makes running long bolts in and out quick and effortless - Sliding T-handle creates increased leverage and multiple access positions.

Pedal Wrench / Use Pedal attachment or detachment / Steel

Bike Frame Protector / Frame