Computer Case APNX Creator C1

For vertical installation, use APNX C1-VGA-KIT (purchased separately).

An interesting premium Midi Tower case that combines a beautiful appearance, reliable build quality and impressive cooling performance. Even taking into account the mass popularity of Airflow cases, the APNX Creator C1 is able to surprise with the fact that inside the case you can place 11 (!) air fans that will generate arctic cold inside a small box. In the case of using mid-level components that do not need record cooling, a potential owner can save on fans, since 4 fans were pre-installed by the manufacturer.

They are organized in accordance with the spirit of the times: three fans are placed behind the front cover, and the fourth is located at the back for additional airflow. At the same time, the front door, the top cover and one of the sides are made of dense mesh material, providing good airflow and at the same time opening a view of the backlight. The other side is traditionally made of tempered glass to emphasize the emphasis on the ARGB backlight of the pre-installed fans.

By the way, the backlight is compatible with Polychrome Sync, Mystic Light, Aura Sync and other software and hardware illumination control systems. Among other features of the case, it is worth highlighting the solid capacity (395 mm for video cards, 166 mm for a tower cooler, 6 pockets for drives), a hidden lower compartment for a power supply and unnecessary cables, 3 platforms for water pumps (maximum 360 mm), several magnetic filters for dust and a front panel with USB C.

Buy APNX Creator C1 white

All prices 6 →

When you make a purchase through links on our site, we may earn an affiliate commission.


	APNX C1 Midi-Tower ATX-Gehäuse Tempered Glass - weiß C1-WT-v1 Value for money Good product with good quality Durable Amazon.co.uk Delivery: to United Kingdom Report		£94.99 Buy in shop

	APNX APNX Creator C1 White Mid Tower Case APCM-CR01043.21 Bring something new into your gaming set-up, with the APNX C1 PC Case. This mid-tower chassis has a spacious interior for hig... moreh-end hardware and a sleek, modern exterior. Its careful design, backed by twenty years’ experience in the industry, means the APNX C1 delivers premium features for excellent performance out of the box. APNX C1 Mid-Tower PC Case at a Glance: Mid-tower PC case with curved edges and modern aesthetics Unique 90° mesh panelling Four APNX FP1 fans pre-installed Spacious chassis for hardware such as ATX motherboards and 395mm long GPUs Flexible cooling configurations with up to eleven fans supported Toolless panelling with snap-on pins for easy installation Modern Aesthetics Bring a touch of modern to your gaming PC, with the APNX C1. This PC case has a sleek exterior, with curved edges and tempered glass panelling. Thanks to the rounded edges, the front mesh panel is able to extend onto the side, for enhanced airflow as well as a unique style. The C1 case is available in three classic colours. This model is white, the perfect addition to lighter gaming set-ups. Providing a strong foundation, this chassis is engineered from SGCC for the main body and 0.8mm SECC steel on the panelling. The interior has been expertly designed to support a wide range of hardware, optimising compatibility. This includes accommodation for up to ATX motherboards and 395mm long GPUs, with seven expansion slots for PCIe devices. The dedicated PSU chamber can hold units up to 270mm long, and there are three drive bays for either 2.5” SSDs or 3.5” HDDs. For your connectivity needs, the APNX C1 has a fully featured I/O panel, including two USB 3.0, one USB-C port, a 3.5mm jack, and a dedicated power and reset button. Peak Cooling Out of the box, the APNX C1 provides phenomenal cooling as it features four pre-installed APNX FP1 PWM ARGB fans. There are three 140mm models mounted to the front panel and a further 120mm fan placed upon the back panel. These fans have been crafted for high-performance cooling, providing adjustable fan speeds between 500RPM and 1600RPM* with incredible airflow and static pressure. Plus, with a maximum noise level of 33.2dBA, these fans are whisper quiet even when they are under full load. In total, there are eleven fan slots on the APNX C1, facilitating great flexibility when it comes to configuring your cooling solution. The front panel can host three 120mm or 140mm fans, whilst the top supports three 120mm or two 140mm fans. Next to the motherboard tray, there is space for three 120mm fans and a singular 120m fan can be mounted behind the backplate for direct CPU cooling. Finally, the rear panel can also hold one 120mm fan. What’s more, there is clearance for CPU coolers up to 166mm tall. If water-cooling is your preference, the top and side panels can alternatively be utilised by radiators up to Overclockers.co.uk Delivery: to United Kingdom Report		£94.99 Buy in shop

	Aerocool APNX-C1-WT-V1-ARGB High-quality mid-tower ATX chassis that combines stunning aesthetics, a wide range of features, and impressive out-of-the-box... moreperformance. Built with meticulous attention to detail, the APNX C1 sets AeroCool's new standard in build quality and underscores our commitment to a new generation of high-performance, top-of-the-line cases. Includes a 5-port ARGB PWM control hub to connect your ARGB fans.Specifications:- Format: Midi Tower- Motherboard form factor: ATX- Window kit: Yes- Mesh-Front: YesInternal dimensions: - Maximum card length: maximum 395 mm- CPU cooler height: maximum 166 mm- Power Supply Form Factor: ATX- Maximum power supply length: maximum 270 mm- Device bays: 3.5´´ external: internal: 3 unit(s)- 2.5´´ internal: 2.5 in 3.5 inch internal: 3 unit(s)Slots: - Full size: 7 unit(s)- Front connectors: 2x Audio, 2x USB-A 3.2 Gen 1 (5 Gbps), 1x USB-C 2.0 (480 Mbps)- The name USB 3.2 Gen 1 is the same as USB 3.1 Gen 1 / USB 3.0.- Lightning: Yes, RGB- RGB Connections: Addressable RGB Heading- RGB standard: AURA Sync, Mystic Light, RGB Fusion, RGB LED- Water cooling possible: Yes- Dimensions: Width: 23 cm x Height: 47.7 cm x Depth/length: 44 cm Tradeinn.com Delivery: in United Kingdom Report		£90.99 Buy in shop

	APNX Creator C1 White Mid Tower Case - APCM-CR01043.21 APCM-CR01043.21 Premium mid-tower ATX case that brings together stunning aesthetics, a wide range of functionality, and impressive out-of-the... more-box performance. Crafted with meticulous attention to detail, the APNX Creator C1 sets its standard in design quality and showcases our commitment to a new generation of top-of-the-line performance gear. Includes 5-port PWM ARGB control hub to connect your ARGB fans.; Awd-it.co.uk Delivery: to United Kingdom Report		£149.99 Buy in shop

	AeroCool Aerocool APNX C1 White Midi Tower / Fan (pre-installed) 4 / Motherboard ATX / Slots 7 / max. CPU Fan Height 166 mm / Max. Graphics Card Length 395 mm Idealo.co.uk Delivery: in United Kingdom Report		£90.99 Buy in shop

	AeroCool Aerocool APNX C1 Midi Tower / Fan (pre-installed) 4 / Motherboard ATX / Slots 7 / max. CPU Fan Height 166 mm / Max. Graphics Card Length 395 mm Idealo.co.uk Delivery: in United Kingdom Report		£90.99 Buy in shop


APNX Creator C1 black	from £97.99	3 offers
APNX Creator C1 blue	from £109.99	4 offers
APNX Creator C1 white	from £90.99	6 offers

APNX Creator C1 white (APCM-CR01043.21)

Buy APNX Creator C1 white

APNX C1 Midi-Tower ATX-Gehäuse Tempered Glass - weiß C1-WT-v1

APNX APNX Creator C1 White Mid Tower Case APCM-CR01043.21

Aerocool APNX-C1-WT-V1-ARGB

APNX Creator C1 White Mid Tower Case - APCM-CR01043.21 APCM-CR01043.21

AeroCool Aerocool APNX C1 White

AeroCool Aerocool APNX C1

APNX Creator C1 configurations