Black&Decker BHHV 520 BF

Serious device

When developing a handheld vacuum cleaner, Black & Decker sacrificed size and opted for quality, performance and efficient operation: this model is not too compact, weighs 1.2 kg and is complemented by a handle. But along with this, you get all the necessary functionality for thorough cleaning and convenient use.

Immediately worth noting is the good suction power, which makes it easy to remove both fine dust and larger debris. The model is designed for dry cleaning only and is equipped with a HEPA fine filter so that the air escaping outside is cleaner. Also a big plus is that there is a power regulator on the handle: you can choose a turbo mode for difficult dirt or turn on an economy mode to extend battery life.

Don't get your hands dirty

The dust collector deserves special attention. In his case, the manufacturer also put ease of use in the first place and did not stint on size - the volume of the tank is 0.7 liters. And this means that you do not have to interrupt the cleaning process to throw out the collected garbage. By the way, the emptying of the tank is as hygienic as possible: you just need to press a button, after which the tank lid will open and the contents will pour into the bucket.

Equipment

There are no additional accessories in the package, and all due to the fact that the nozzle is built right into the body. The vacuum cleaner is already distinguished by an elongated “nose”, so a crevice nozzle also extends out of it. It will clean all hard-to-reach places and secluded corners of the house, and you will not have to bend over much. In addition, the vacuum cleaner is paired with a charging dock, because it is powered not from the mains, but from the built-in battery. One battery charge lasts up to 21 minutes of continuous operation in economy mode, with an increase in power, this figure is almost halved. A full charge takes about 5 hours. Conveniently, the indicator on the case shows the level of charge, so a dead device will not take the owner by surprise. The docking station can be placed on the surface or attached to the wall - for this, a set of dowels and screws was put in the box. It is designed not only for charging, but also for storage, since the charging process automatically stops after the full restoration of the energy reserve.