i-Tec USB 3.0 Charging HUB 10 port + Power Adapter 48 W (U3CHARGEHUB10)

i-tec USB 3.0 Charging HUB 10 port + Power Adapter 48 W

This HUB offers ten USB 3.0 ports with the Plug & Play function and with standard USB charging – the HUB automatically detects whether a device for USB charging is connected. As this HUB is equipped with ten USB 3.0 ports, it can charge up to ten devices at a time. The USB 3.0 interface is especially important for data transfers from USB 3.0 memory... morecards and flash drives, where its high transfer rate is most useful. An external power adapter is included in the package to guarantee stable HUB performance and charging from the USB ports, providing up to 10 W of charging power for each port.The individual HUB ports can be switched on/off by the appropriate switch, saving you HUB consumption while increasing the charging input power on the ports you leave on.This HUB does not require the installation of drivers. You will just connect it by the USB cable to your computer and immediately you can start using it. This HUB has a built-in overcurrent protection of your computer in case of short connection on the peripheries. The interface is compatible with USB 2.0 / 1.1.The HUB is installed automatically from the system and does not require any drivers. Connect the AC adapter connector to the HUB and the AC adapter to a 230 V outlet. Then connect the HUB via the USB cable to a free USB port (USB 3.0, 2.0 or 1.1 standard) on your laptop/PC and follow the instructions on the screen. The HUB will be installed and displayed in the Device Manager as General USB Hub and General USB SuperSpeed Hub.Long product description: i-tec USB 3.0 Charging HUB 10 Port with power adapter 48 W, 10x USB 3.0 charging port, ideal for laptop ultrabook tablet PC, Windows Mac LinuxSpecifications:- 1x USB 3.0 port for connecting to the host device- 10x USB 3.0 port- Charging power of the USB ports up to 10W- 1x Power input (DC 12V/4A)- On / Off switches for individual USB ports- LED indicators- USB 3.0 cable from type A to type B (100cm)- Surge and overcurrent protection- OS: Windows XP / Vista / 7 / 8 / 8.1 /10, macOS X, Linux, Chrome OS- Product Dimensions: 151 x 53 x 24mm- Product Weight: 165g- Package Dimensions: 173 x 116 x 60mm- Package Weight: 507gSYSTEM REQUIREMENTS:- Hardware Requirements:- Device with an available USB-A portOperating System:- Windows XP / Vista / 7 / 8 / 8.1 /10, macOS X, Linux, Chrome OSPackage contents:- USB 3.0 cable from type A to type B (100cm)- Power adapter (DC cabel 150cm)- Manual