Jonsbo C3 Plus black

Brushed aluminium M-ATX case with simple and elegent design (Dimension: 218 * 360 * 398mm W*D*H). Also included is an eye catching 5mm tempered glass panel for displaying components.Internally there is room for a M-ATX motherboard (245mm * 245mm). There are 4 expansion slots, four 3.5-inch HDD and one 2.5-inch SSD can be fitted. The heat dissipatio... moren part has 5 fan positions, a rear 120mm fan is standard, and a maximum 240mm cold row is installed in the front.Model: C3 PLUSColor: BlackDimension: 218MM (W) * 360MM (D) * 398MM (H)Hardware material: L-shaped main body and right side plate are made of 1.5MM steel plate material; internal structure: 0.8MMSGCC steel plate + all blackened coating treatment; left side plate: 5.0MM fully tempered glassMotherboard: ITX / M-ATX (245 * 245MM)Drive Bay: 4 * 3.5HDD + 1 * 2.5SSD Or 3 * 3.5HDD + 3 * 2.5SSDCooling Systerm: Top: 1 * 140MM Fan (Built in); Front: 2 * 120MM Fan (Optional); Back: 1 * 120MM Fan (Optional); Power Storehouse Upper Plate: 1 * 120MM Fan (Optional)Water cooling support: the front panel supports one 240MM water cooling (if the cold row interferes with the graphics card, the fan or cold row can be installed on the inner layer of the front panel) (optional); the rear board supports one 120MM water cooling (optional)CPU Cooler: Not higher than 170mm (mainstream high-end 120 air-cooled radiators can support)Display Card: 340mm Or 280mm (support 340mm need to remove the front plate bracket)Front I / O Port: USB3.0 * 2, Audio * 1, MIC * 1Expansion Slot: 4Power Supply: 250mm Or 185mm (250M length needs to occupy the hard disk installation position of the hard disk compartment)Weight: 5.3KG

Brushed aluminium M-ATX case with simple and elegent design (Dimension: 218 * 360 * 398mm W*D*H). Also included is an eye catching 5mm tempered glass panel for displaying components.Internally there is room for a M-ATX motherboard (245mm * 245mm). There are 4 expansion slots, four 3.5-inch HDD and one 2.5-inch SSD can be fitted. The heat dissipatio... moren part has 5 fan positions, a rear 120mm fan is standard, and a maximum 240mm cold row is installed in the front.Model: C3 PLUSColor: BlackDimension: 218MM (W) * 360MM (D) * 398MM (H)Hardware material: L-shaped main body and right side plate are made of 1.5MM steel plate material; internal structure: 0.8MMSGCC steel plate + all blackened coating treatment; left side plate: 5.0MM fully tempered glassMotherboard: ITX / M-ATX (245 * 245MM)Drive Bay: 4 * 3.5HDD + 1 * 2.5SSD Or 3 * 3.5HDD + 3 * 2.5SSDCooling Systerm: Top: 1 * 140MM Fan (Built in); Front: 2 * 120MM Fan (Optional); Back: 1 * 120MM Fan (Optional); Power Storehouse Upper Plate: 1 * 120MM Fan (Optional)Water cooling support: the front panel supports one 240MM water cooling (if the cold row interferes with the graphics card, the fan or cold row can be installed on the inner layer of the front panel) (optional); the rear board supports one 120MM water cooling (optional)CPU Cooler: Not higher than 170mm (mainstream high-end 120 air-cooled radiators can support)Display Card: 340mm Or 280mm (support 340mm need to remove the front plate bracket)Front I / O Port: USB3.0 * 2, Audio * 1, MIC * 1Expansion Slot: 4Power Supply: 250mm Or 185mm (250M length needs to occupy the hard disk installation position of the hard disk compartment)Weight: 5.3KG