PLANET GSW-2620HP

PLANET 24P Sw Gb PoE+ SFP 250W Unmanaged Cost-optimized. Configure-free Gigabit PoE+ Switch for System IntegratorsPLANET GSW-2620HP. an ideal Gigabit PoE Switch. provides a cost-effective advantage to local area networks of SMBs. Offering Layer 2 data packet switching and stable operation. this model also complies with IEEE 802.3at Power over Ether... morenet Plus (PoE+) at an affordable price. The GSW-2620HP is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 2 1000BASE-X SFP interfaces with inner power system. Its 24 Gigabit Ethernet ports are integrated with an 802.3at PoE+ injector function. It offers a rack-mountable. safe and reliable power solution for SMBs deploying Power over Ethernet networks. IEEE 802.3at PoE+ Compliant Power Source SwitchThe PoE in-line power following the IEEE 802.3at/af standard makes the GSW-2620HP able to deliver Gigabit speed data and up to 30 watts of power per port to 24 PoE compliant powered devices (PDs) with a combined power output budget of up to 250 watts. The GSW-2620HP provides more flexibility in power requirement for all kinds of PDs with affordable installation costs.Ethernet Data Transmit Distance ExtensionThe built-in solid DIP switch provides “Standard”. “VLAN” and “Extend” operation modes. The GSW-2620HP operates as a normal IEEE 802.3at PoE+ switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.In the “Extend” operation mode. the GSW-2620HP operates on a per-port basis at 10Mbps duplex operation but supports 25-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature. the GSW-2620HP provides an additional solution for 802.3at PoE+ distance extension. thus saving the cost of Ethernet cable installation.Intelligent Powered Device Alive CheckThe GSW-2620HP can monitor connected PD status in real time via PD alive check function. Once the PD stops working and responding. the GSW-2620HP will resume the PoE power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.Energy-saving DesignThe GSW-2620HP uses new engine that incorporates two advanced Green Networking technologies:- Idle Mode Link Down power savings- Intelligent use of power based on cable lengthThe Idle Mode Link Down power saving of the GSW-2620HP complies with IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. The Intelligent use of power feature actively determines the appropriate power level based on the cable length. When connecting to the GSW-2620HP with Ethernet cable shorter than 20m. a device can obtain maximum power savings because the GSW-2620HP would automatically detect the Ethernet

Cost-optimized. Configure-free Gigabit PoE+ Switch for System IntegratorsPLANET GSW-2620HP. an ideal Gigabit PoE Switch. provides a cost-effective advantage to local area networks of SMBs. Offering Layer 2 data packet switching and stable operation. this model also complies with IEEE 802.3at Power over Ethernet Plus (PoE+) at an affordable price. T... morehe GSW-2620HP is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports and 2 1000BASE-X SFP interfaces with inner power system. Its 24 Gigabit Ethernet ports are integrated with an 802.3at PoE+ injector function. It offers a rack-mountable. safe and reliable power solution for SMBs deploying Power over Ethernet networks. IEEE 802.3at PoE+ Compliant Power Source SwitchThe PoE in-line power following the IEEE 802.3at/af standard makes the GSW-2620HP able to deliver Gigabit speed data and up to 30 watts of power per port to 24 PoE compliant powered devices (PDs) with a combined power output budget of up to 250 watts. The GSW-2620HP provides more flexibility in power requirement for all kinds of PDs with affordable installation costs.Ethernet Data Transmit Distance ExtensionThe built-in solid DIP switch provides “Standard”. “VLAN” and “Extend” operation modes. The GSW-2620HP operates as a normal IEEE 802.3at PoE+ switch in the “Standard” operation mode. The “VLAN” operation mode features with port-based VLAN function that helps to prevent the IP camera’s multicast or broadcast storm from influencing each other.In the “Extend” operation mode. the GSW-2620HP operates on a per-port basis at 10Mbps duplex operation but supports 25-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-new feature. the GSW-2620HP provides an additional solution for 802.3at PoE+ distance extension. thus saving the cost of Ethernet cable installation.Intelligent Powered Device Alive CheckThe GSW-2620HP can monitor connected PD status in real time via PD alive check function. Once the PD stops working and responding. the GSW-2620HP will resume the PoE power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reducing administrator management burden.Energy-saving DesignThe GSW-2620HP uses new engine that incorporates two advanced Green Networking technologies:- Idle Mode Link Down power savings- Intelligent use of power based on cable lengthThe Idle Mode Link Down power saving of the GSW-2620HP complies with IEEE 802.3az Energy Efficient Ethernet (EEE) standard to automatically lower power for a given port when it is not linked. The Intelligent use of power feature actively determines the appropriate power level based on the cable length. When connecting to the GSW-2620HP with Ethernet cable shorter than 20m. a device can obtain maximum power savings because the GSW-2620HP would automatically detect the Ethernet cable length and reduce power usage. The