Comparison Keychron C1 Red Switch vs Keychron K2 RGB Backlit Aluminium Frame Gateron Red Switch

— Wired. Connection using a cable with one or another type of connector — most often USB, less often PS/2 or a proprietary plug (see "Connection interface"). Wired keyboards are notable for their low cost and overall convenience — in the sense that they do not require batteries and the operating time is unlimited. However the wire limits mobility; however, given that most often the keyboard is used in close proximity to the computer, this shortcoming cannot be called critical.

— Radio. Wireless connection over the air, usually through a wireless adapter connected to a computer via a USB port. The main advantage of this option can be called the actual absence of a wire; while the communication range is usually several metres, which gives freedom of movement and even allows you to use the keyboard as a "computer remote control". On the other hand, wireless models are much more expensive than wired ones, and their operation requires separate power supply from batteries or a rechargeable battery, the charge of which is limited — accordingly, the continuous operation time is limited. Separately, we note that this option is designed mainly for stationary PCs; if a wireless keyboard is needed for a laptop, it is better to pay attention to Bluetooth models (see below).

— Bluetooth. Another way to wir...elessly connect keyboards. Technically, Bluetooth is based on radio waves, but this technology has its own characteristics, so it is listed separately from the "normal" radio connection (see above). The main one of these features is that many models of modern electronics (almost all laptops and tablets, some PCs, etc.) are equipped with built-in Bluetooth modules, which allows you to connect such keyboards without using additional adapters. In addition, the range of such a connection is officially at least 10 m (in fact, of course, it depends on obstacles, interference, etc.). It is this option that will be optimal if you need a wireless keyboard for a Bluetooth-enabled device.

— Bluetooth / radio. Wireless keyboards that can connect both via Bluetooth and radio. See above for more details on each of these options. Also note here that such a keyboard is usually connected directly to a Bluetooth device (for example, a laptop), and if the computer does not support Bluetooth, you can connect a USB adapter to it and use a radio connection. Thus, the keyboard is as versatile as possible in connection. However, such versatility significantly affects the cost, and is required not so often; so this option is not widely used.

— Bluetooth / radio / wired. Keyboards that support all three connection methods described above. This is the most versatile option, giving the user the freedom to choose for different situations. For example, while playing a game or watching a movie, you can sit in a comfortable chair away from the screen by connecting the device wirelessly, and when typing or surfing the Internet, you can move to the table and use the wire, saving battery power. At the same time, such versatility is not often required and is expensive, so models with this type of connection are not popular either.

A version of the "blue tooth" technology for connecting the wireless keyboard to other devices from the outside as a manipulator. The higher its serial number, the more stable and noise-proof connection is provided. At the moment, Bluetooth v 5 is the most advanced standard in keyboards.

The keyboard's ability to quickly switch between multiple devices. Multi-Device allows you to simultaneously work with a tablet, TV, and other devices with one keyboard.

The length of the cable that the keyboard is equipped with for wired connection (see "Connection type").

When choosing this parameter, you should first of all take into account the distance from the device to the connection port: a cable that is too short may simply not reach the connector, and a cable that is too long may get confused at hand and create inconvenience. As for specific values, the reference length is 1.8 m. However, there are cables both shorter and longer.

The wireless connection range provided by the keyboard (see "Connection type").

Almost all modern wireless models function reliably at a distance of at least 2-3 meters. Therefore, you only need to pay attention to this parameter if the keyboard will be used farther from the computer. When evaluating the range, keep in mind that it is given for ideal conditions: no interference or obstacles, a fully charged battery, etc. In practice, the actual range might be somewhat shorter, so it's advisable to account for a margin when selecting a model. Nevertheless, the stated range can give a good indication of the practical capabilities of different models and help in comparing them.

Traditional keyboards are divided into three main varieties — full-size, compact and ultra-compact. The main difference between them is that full-size models have a Numpad — an additional block with numeric keys and arithmetic signs. Compact models, respectively, do not have a numpad, and in ultra-compact models, the arrow block is either completely absent or located under the Enter key in the form of very small keys.

And full-size, and compact, and ultra-compact keyboards can have different types of layouts. At the same time, the arrangement of letters and numbers above the letters in all types of layouts is the same, the differences are in the shape and position of additional keys (special characters like backslash, system control, modifiers like Shift and Alt, etc.). Here are the most popular options:

— ANSI. The "American" layout format, the distinguishing features of which are, in particular, the same width of both Shift keys, the same labeling and assignment of the Alt keys, the single-row Enter key and the backslash located above it (which is often made slightly longer than the standard key).

— ISO. "European" layout format. The Enter key occupies two rows, while at the top it is slightly longer than at the bottom; the left Shift is shorter than the right one, there is a...backslash next to it; next to the bottom of the Enter may be a second backslash or other special character key; the right Alt is designated as Alt Gr and is intended for entering additional characters in European languages.

— K.S. The "Korean" keyboard layout provides a double-row Enter, as in the ISO described above, however, in this case, the lower part of the Enter is made longer, and not the upper one. The backslash is above Enter, next to Backspace, and Backspace itself is the same length as standard keys (that is, noticeably shorter than in other layouts).

— JIS. Keyboards with a "Japanese" layout have a double-row Enter with an increased length of the upper half — like the ISO described above. However, in this case, the backslash is not located on the left side of the keyboard, but on the right, next to Enter (where an additional symbol key can be located in ISO). Additional character keys may be provided — next to Backspace (as in KS) and/or to the left of the right Shift. In addition, the right Alt can be formatted as Alt Gr.

In addition to compact and full-size, there are also non-traditional keyboard formats:

— Numpad. Separately made block of numeric keys. With the help of such a device, you can, in particular, turn a compact keyboard into a full-size one. Among other things, this combination can be useful for travel: packing a Numpad separately from the keyboard is easier than finding a place for a full-sized "board". Another option for using the Numpad is to connect to a cash register, terminal, etc. to work as a calculator keyboard or in a similar capacity.

— Keypad. A specialized device in the form of a small (approximately 15 – 20 keys) keyboard under one hand; usually, it is complemented by an arm rest, and often also by side buttons for the thumb. Such devices are especially convenient for games and are mainly used in them — certain game actions can be attached to the keypad buttons (including those that are usually implemented through the menu or a key combination on a standard keyboard). The keypad can both complement the main keyboard and serve as a completely separate game pad.

— Non-standard. Non-standard format keyboards that do not belong to any of the varieties described above. The specific design and use of such devices may vary. So, these can be game models in the form of the left half of a standard keyboard (this part is mainly used in games); ultra-compact models for tablets (see "In the direction"); keyboards for TVs, supplemented with special buttons and designed to be held in two hands in the manner of a gamepad, etc.

The model of switches (switches) used in the keyboard - switching mechanisms installed under each individual key. These details are given if the design uses advanced mechanics, positioned as a better option than traditional switches. Mostly gaming keyboards are equipped with such mechanics.

The most popular switch brands in our time are Cherry MX, considered the "classic of the genre" for high-quality mechanics; Gateron, practically not inferior to him; not so advanced, but also cheaper Kailh and Razer, as well as ultra-budget Outemu. For all these brands, different types of switches have a different stem color, which can be used to determine the features of the keyboard. It is also worth saying that modern mechanical switches are divided into three main varieties: linear, tactile and clicky.

- Linear. Such solutions are closest to conventional membrane keyboards: the key travel is uniform along the entire length, with minimal resistance and the absence of a clear actuation point. There is an opinion that the linear "mechanics" is best suited for games where you have to deal with fast and frequent clicks; however, in practice, this moment largely depends on the personal tastes of the u...ser, nothing prevents the use of such keyboards for working with texts.

- Tactile. Switches with a clearly defined actuation point - a kind of barrier to the path of the key. Such a "barrier" allows you to clearly determine by touch whether the key has worked or not. Tactile keyboards are valued primarily by tech who have to type large volumes of texts.

- Tactile-auditory (Clicky). In such switches, the actuation point is felt not only by touch, but also by ear: the actuation of the key is accompanied by a clearly audible click, which is often compared to the sound of the keys of a typewriter. Due to this, this option is also very popular among users dealing with texts. Some people consider switches of this type not very suitable for games, since they are supposedly not very convenient for frequent, fast pressing; however, a quality Clicky switch is as good as a linear switch in this regard, and the choice depends solely on personal preference. But the unequivocal disadvantages of such keyboards include a rather loud click sound, which in some situations may be superfluous.

As for specific colors, here are their features:

- Red (red). Linear type switches with minimum resistance. They are popular, in particular, among professional gamers who deal with dynamic games and try by all means to speed up their reaction to gaming events. On the other hand, a low force increases the likelihood of accidentally pressing an unnecessary button.

— Black. Another type of linear switches. They have a tighter move compared to Red, which, on the one hand, requires a little more effort, on the other hand, minimizes the chance of accidentally pressing the wrong key.

Blue. Switches in clicky format, with tactile feedback and a click.

— Brown. Switches with tactile feedback, but no "click". The Brown action is great for when you want a keyboard with tactile feedback and at the same time you want to avoid unnecessary noise (although the sound is still louder than on a membrane keyboard). In addition, it is considered a good option for tech who are just starting to get acquainted with mechanical keyboards.

— Silver. Linear switches designed for maximum operating speed. They have a very low stroke - about 1 - 1.2 mm - as well as a very small pressing force, which contributes to high speed. At the same time, the use of such a keyboard requires a certain skill, since even a small effort from an accidental touch usually leads to the operation of a key.

The colour of the backlight provided in the design of the keyboard.

In general, the backlight performs two functions: practical (makes the keys more visible in low light) and aesthetic (gives the keyboard a beautiful appearance). However, it cannot be said that non-backlit keyboards will be unusable in the dark, the light from the monitor will still illuminate the buttons. The simplest version of the backlight is one-colour. In this case, specific colours can be different: for example, white is well suited for general-purpose keyboards (work or home), but other shades can be found in gaming or design models, for example, red, green, blue, purple or orange. If two or three colours are indicated for the keyboard, this may mean either the ability to switch between these colours, or that this model comes in several versions that differ in the shade of the backlight; these nuances should be clarified separately.

The most advanced options are multi-colour and RGB backlighting. Multi-colour systems are called systems in which more than three colour options are provided, sometimes with intermediate shades. And RGB-backlight all...ows you to choose almost any shade at the request of the user; in addition, the possibility of synchronization (see "Illumination with effects") is found mainly in such systems, although single-colour keyboards can also be equipped with other effects.

The presence of additional effects in the backlight provided in the keyboard (see above). For models with the backlight synchronization function, this item indicates the synchronization technology.

Additional backlight effects can be different: multi-coloured backlighting of individual keyboard zones, smooth “flowing” of one colour into another, response to system or game events, etc.; specific features should be clarified for each model separately. As for synchronization, it allows you to coordinate the backlighting of various system components — keyboards, case mice, graphics cards, etc.; this opportunity is especially appreciated by the owners of high-end gaming stations. Coordination requires that all highlighted components support the same technology; usually, each manufacturer has its own — Aura Sync for Asus, RGB Fusion for Gigabyte, etc.