Body type
— Oblong. Oblong action cameras — they look like an elongated rectangle (parallelepiped) or a cylinder, while the lens is placed on one of the narrow ends. This is the difference between the
oblong cameras and the
conventional ones described below. This layout is convenient primarily because it allows you to hold the camera in your hand securely. On the other hand, the control panel and display during shooting are often turned away from the user, which can create some inconvenience. However, this can be offset by the use of folding displays and other similar features; and in some situations, the side display and controls even prove to be an advantage.
—
Vertical. Oblong action cameras that are stretched up and have a lens at the top. Such models are very similar to chest cameras and can be used for such purposes. However, their main use is shooting yourself and holding it in your hand. It is for this purpose that the case is made elongated, which makes it convenient to cover it with your hand.
— Conventional. The camera body has the shape of a rectangle, but the lens is placed on its wide, frontal edge. Outwardly, such models are most similar to classic digital cameras. Some may have a fairly large display, placed on the opposite side of the lens, as in the same photo cameras, which allows the user to see the shooting scene in real time. However, the l
...ocation of the lens, usually, does not affect the technical specs of the camera itself, and therefore both conventional and oblong models can provide the same video quality.
— Cube. A fairly specific type of action camera, the body of which has the shape of a compact cube. Usually, such models are relatively small in size, but the size reduction, in turn, affects the video capabilities and overall functionality. For example, such models are extremely rarely equipped with displays (although many of them can be connected via Wi-Fi to a smartphone or tablet, which compensates for this disadvantage).
— Glasses with a camera. Devices in the form of sports glasses with a built-in camera. The lens of such a camera is usually located between the glasses lenses, less often on the side, based on one of the temples; during normal use, it constantly “looks” approximately in the same direction as the user himself. Also, the advantages of cameras of this type include accuracy and stealth. On the other hand, in glasses, the additional electronic filling must be very tiny, which makes it difficult to use advanced optics and severely limits the battery capacity. And even with this in mind, such devices are heavier and bulkier than ordinary sports glasses. Another disadvantage is that the camera and frame with lenses cannot be matched separately — as a result, a model with a suitable camera may not be suitable due to the size or style of the glasses, and vice versa.
— Camera mask. A protective mask with a built-in camera. Note that such masks can have different specializations — for scuba diving, motocross, skiing, etc.; these details must be clarified before purchase. However, the lens in such devices is usually located in the middle of the forehead, so the camera takes POV photos and video. The main disadvantage of such devices is that when choosing, you need to take into account both the technical specs of the camera and the purpose and convenience of wearing the mask. In other words, a good camera can be built into an inappropriate mask, and vice versa.
— Camera with a clip. Action cameras fall into this category, for which a clip-on mount is standard. Many of them can be additionally equipped with other mounts, but primarily designed for this type of use and may not be the best purchase for extreme video shooting. On the other hand, such a mount is quite versatile, since it allows you to attach the camera to almost any piece of equipment (backpack strap, unloading belt, belt, etc.).
— Sphere. The shape of the body is found mainly in panoramic and 360° cameras (see "Product type") — it is in such devices that the spherical body is often the most convenient. In the case of conventional action cameras, "sphere" usually means a cylindrical body with a lens on a flat end; such cameras are similar to conventional cameras (see above) and do not have fundamental differences from them.Dust-, moisture-proof camera
The level of dust and water protection provided by the body of the camera itself. Most action cameras are designed for recording in extreme conditions, but the level of protection of each model can vary significantly — from the ability to shoot in the rain, to full tightness, allowing for a long immersion under water.
To characterize the security level of the camera, the international IP classification is used. Each device is assigned a code of the form IPXX, where instead of the first X — the level of protection against the ingress of foreign objects (including dust), and instead of the second X — the level of protection against the ingress of water.
Levels of protection against dust and foreign objects in modern action cameras are never lower than 5 — lower protection classes would provide unacceptably large gaps in the body. Specifically, level 5 provides that dust can get inside in small quantities, but does not affect the performance of the device. A higher level — 6 — provides full dustproof.
To characterize the level of protection from water, the following classification is used:
0 — no protection;
1 — drops of water falling at a right angle relative to the operating position of the device cannot cause dangerous consequences;
2 — protection against drops falling on the equipment at an angle of up to 15°;
3 — at an angle up to 60° (splash protection, minimum rain protection);
4 — protection from rai...n with strong wind;
5 — protection against water jets falling at any angle (water jets, for example, from a hose or heavy rain cannot harm the device);
6 — from temporary flooding;
7 — from temporary immersion under water to a depth of not more than 1 metre;
8 — from prolonged diving to depth (maximum time and depth are specified by the manufacturer separately).
In some cases, a model may only be IP-certified for one type of protection (only against sand or water). In this case, instead of the second parameter, simply X is put. So, for example, IPX6 security means that the camera is protected from temporary flooding and heavy rain, but the level of protection from dust is not defined and, accordingly, is not certified.
It is important to note that this parameter characterizes the protection of the camera itself, but does not take into account the capabilities of protective cases. Do not confuse it with the protection of the outer case, which sometimes comes with the device (see "Dust-, moisture-proof of case").
Dust-, moisture-proof of case
The degree of dust and water protection of the protective case supplied with the camera.
Protected case will save your camera from dust, water, temperature changes, shocks, etc. The specific degree of protection is indicated according to the international IP (Ingress Protection Rating) system, according to which each device is assigned a code of the form IPXX, where X is replaced by specific numbers. The first of them characterizes the protection against the penetration of foreign objects (from 0 to 6, where 0 is no protection). Usually, in boxes for action cameras, this indicator does not go below 5, because otherwise the container would have too large gaps, and its use simply would not make sense. Level 5 provides dust resistance — dust can get inside the case, but in small quantities that do not affect the device inside. Level 6 corresponds to complete imperviousness to dust.
The second digit is protection against liquid ingress (from 0 to 8, where 0 is no protection). Usually, the minimum level of protection against water is 6.
6 — protection against short-term immersion (for example, falling into a sea wave);
7 — protection against temporary immersion under water (up to 30 minutes) to a shallow depth (up to 1 metre), without continuous operation in immersed mode;
8 — protection against immersion to a depth of more than 1 metre for a time of more than 30 m, with the possibility of continuous
...operation underwater. The specific level of protection of level 8 can be quite impressive — up to the possibility of diving to several tens of metres.
Note that protective cases for action cameras can be sold separately. Therefore, if the capabilities of the complete container do not suit you, there may be a more secure case on the market. On the other hand, in general, it is still more convenient to buy such an accessory immediately with a camera — so as not to waste time and effort on choosing the right protective case.HD (720p)
The ability of the camera to record HD video (720p).
The official HD specification provides a resolution of 1280x720. However, in action cameras, there may be resolutions slightly different from this parameter, for example, 1080x720 or 1440x960. Anyway, HD is the most modest of today's high-definition standards, which, nevertheless, provides a fairly clear and detailed image.
Another important parameter given in this paragraph is the frame rate. The higher it is, the smoother the movement in the frame will be, and the details in dynamic scenes will be visible clearly. Technically,
30 fps or even less is enough for video, but
60 fps is considered the perfect value — at this frame rate, motion blur becomes almost imperceptible and at the same time the size of the captured files remains within reasonable limits. However, there are cameras on the market with higher frame rates at HD resolutions —
100 fps,
120 fps,
200 fps and even
240 fps. This speed is usually used for recording slow-motion video, but such a possibility needs to be specified separately.
Full HD (1080p)
The ability of the camera to shoot Full HD (1080p) video.
The standard image size in this standard is 1920x1080. However, in the case of action cameras, this category also includes some other resolutions that are similar in quality, for example, 1440x1080. In general, Full HD provides a very good balance between image quality, the volume of captured files and the processing power requirements for processing them, which makes this standard very popular in modern video equipment — both in cameras and in TV monitors.
Another important parameter given in this paragraph is the frame rate. The higher it is, the smoother the movement in the frame will be, and the details in dynamic scenes will be visible clearly. Technically,
30 fps or even
less is enough, but
60 fps is considered the perfect value — at this frame rate, motion blur becomes almost imperceptible and at the same time the size of the captured files remains within reasonable limits. However, there are cameras on the market with a higher frame rate at FullHD resolutions —
90 fps,
100 fps,
120 fps and even
240 fps. This speed is usually used for shooting slow-motion video, but the possibility of such shooting needs to be specified separately.
Digital stabilization
The presence of a digital (electronic) stabilization system in the camera design.
Any stabilization is intended to compensate for small juddering of the image that occurs due to the instability of the hold in the hands, vibrations from the motor or road roughness (when used in transport), etc.
Digital stabilization is carried out as follows: a reserve area is allocated along the edges of the sensor, which under normal conditions does not participate in the formation of the final image. If the device is being shaken, the camera electronics select certain parts of the image from the reserve and build the image in such a way that in the end, it remains stable.
Compared to other methods of stabilization, digital systems are extremely simple and reliable. Moreover, they are inexpensive and have almost no effect on the weight, dimensions, and price of the camera. At the same time, with this method of stabilization, the effective area of the image sensor is reduced, which can adversely affect the image quality and the amount of noise on it.
Microphones
The number of built-in microphones provided in the camera.
This parameter is indicated only for models that have
more than one microphone. This design provides additional capabilities, but the range of these capabilities depends on the number of microphones and the features of a particular model. So, most often such devices have two microphones; this can be a pair for recording stereo sound, or one microphone can work to record sound, and the second one can act as a sensor for the noise reduction system (see above). A larger number - 3 or 4 microphones - is found mainly in 360-degree cameras (see “Product type”), where such equipment is used to record “surround” multi-channel sound.
Megapixels
The number of megapixels in the action camera sensor, in other words, the resolution of this sensor(1 megapixel is 1 million photosensitive points).
There is an opinion that the higher the resolution, the better the image quality. It is true from the point of view that manufacturers are trying to install high-resolution sensors in advanced cameras. At the same time, there are no strict dependencies here, and from the technical point of view, the number of megapixels determines only the maximum image resolution that can be captured using this sensor. The quality of this picture will depend both on several features of the sensor itself (size, type, special design solutions), and the specs of the camera. So when choosing, you should focus not so much on the resolution of the image sensor, but on the general class of the camera and reviews with examples of footage.
Photo resolution
The maximum resolution at which the action camera can take photos. Specified in pixels horizontally and vertically.
This parameter is directly related to the resolution of the image sensor(see above): the total number of pixels in the photo, usually, corresponds to the number of pixels in the sensor. For example, a photo resolution of 4608x3456 corresponds to a sensor of 15925248 pixels, or approximately 16 megapixels. If the number of pixels in the photo is greater than the claimed resolution of the sensor, then the manufacturer uses software tricks that allow you to improve the photo resolution to a higher one than originally. This reduces the cost of devices but also affects the quality of images.
Theoretically, high-resolution images can provide good detail, but in fact, much depends on the specs of the sensor (primarily physical size) and image processing features.