Comparison Casio CTK-1500 vs Casio LK-120

Type of action used in synthesizer keys.

— Passive. The simplest type of mechanics, when each key is, in fact, a “switch” for its note: it only turns the sound on and off, while the volume of this sound does not depend on the strength and intensity of pressing. Passive keyboards usually have unweighted, less often semi-weighted hardness (see below). Their main and, perhaps, the only advantage is their low cost, due to the simplicity of design. At the same time, the capabilities of such tools are very limited, and even when training, it is recommended to use them only at the very initial stages. As a result, passive mechanics are used exclusively in the simplest low-cost-level synthesizers, which are more suitable for the role of a toy for entertainment, rather than a full-fledged instrument.

— Active. A mechanic that provides a relationship between volume and pressing force: the harder the key is pressed, the louder and sharper the sound will be. Most often combined with semi-weighted, occasionally unweighted hardness (see below). Such keys already make it possible to control the dynamics of each note: select its volume "on the fly", highlight accents, use special techniques, etc. This feature is especially important in training, when you need to train to control the effort on each individual finger. Active mechanics are highly recommended even for an inexpensive synthesizer, and for a mid-range instrument it is almost man...datory, as well as for serious learning. At the same time, many models may provide sensitivity adjustment, or even a complete switch to passive mode (for example, to simulate some instruments).

— Hammerhead. The most advanced kind of mechanics. Like the active one, it provides volume control depending on the force of pressing, but it fundamentally differs in response: hammer action is used only in weighted keyboards (see "Rigidity"), and the feeling when playing it is close to playing on a real piano. The degree of approximation, however, can be different — some models are indistinguishable in sensations from the piano, in others the mechanics are simpler. However, anyway, such features are not cheap, despite the fact that the real need for a "piano" response is extremely rare. As a result, hammer action keyboards are found mainly among top-class instruments, mainly workstations (see "Type") with full-size keyboards for 88 keys.

The presence of a backlight in the design of the keyboard.

Usually, in this case, the illumination of each individual key is implied. This function is not of great importance for ordinary music-making, but it can be very relevant when learning: the instrument can highlight the keys that need to be pressed at the moment, simplifying the task for the student. Actually, the presence of a backlight is most often just a sign of the presence of a training mode in the instrument (see below), although not every “training” synthesizer has this function.

The polyphony supported by a synthesizer, in other words, is the number of “voices” (tone generators) that can simultaneously sound on it.

This parameter is often described as the number of notes that can be played simultaneously on the keyboard. However, this is not entirely true due to the fact that in many timbres one note can activate several tone generators. As a result, for example, to play a chord of 3 notes in a timbre with 4 tone generators per note, polyphony of at least 3 * 4=12 voices is required. In addition, Auto Accompaniment and Preset Songs (see related sections) also use tone generators, requiring even more voices to work effectively with these features.

The minimum value for a more or less functional modern synthesizer is polyphony for 32 voices — and even then such an instrument can be used mainly for initial training and simple melodies. For a more solid application, it is desirable to have at least 50 – 60 voices, and in professional models (in particular, workstations where you have to deal with several audio tracks at once), there are models with polyphony for 150 tone generators or more.

In general, a more advanced synthesizer is likely to have more extensive polyphony, however, it is only possible to evaluate the class of an instrument by this parameter very approximately — instruments with the same number of voices can differ greatly in level. The only exception to this rule are children's synthesizers (see "T...ype"), which support up to 20 voices.

The number of built-in sounds provided in the synthesizer.

The number of timbres is often described as the number of instruments that a given model can imitate. However, this is not entirely true — rather, this parameter can be called "the number of instruments and sound effects." For example, the same instrument — an electric guitar — with different "gadgets" (distortion, overdrive) will sound differently, and in the synthesizer each such gadget will be considered a separate timbre. The “drums” timbre usually combines different types of drums and other percussion instruments — in other words, it allows you to portray both the “bass drum” and the cymbals without switching settings, just by pressing the desired keys. And some timbres may not have analogues among real instruments at all.

The more built-in timbres, the more extensive the possibilities of the synthesizer, the more diverse the sounds that can be extracted from it. At the same time, in high-end models like workstations (see "Type"), this number can reach 1000 or even more.

The number of auto accompaniment styles (see above) originally provided in the synthesizer, in other words, the number of accompaniment options available to the user.

The more extensive this set, the higher the probability of finding among these melodies suitable options for a particular case. At the same time, the abundance of styles in itself is not yet a 100% guarantee that among them there will be a suitable one, especially since different synthesizer models can differ markedly in a specific set of melodies. So the list does not hurt to clarify before buying. Also note that the situation can be corrected by user styles (see below) — many synthesizers with auto accompaniment support them.

The range in which you can change the tempo of the programme played by the synthesizer — auto accompaniment, lesson tune (see above), metronome (see below), recorded sample, etc.

Pace is measured in beats per minute. Changing it allows you to adjust the speed of the synthesizer to the specifics of the situation — for example, slightly slow down the tutorial if it is too hard to master at the initial pace. The wider the range of tempo adjustment, the more options the musician has to choose from, especially in the area of very slow and very fast tempos.

Note that the traditional range of musical tempos covers values from 40 beats / min (“grave”, “very slowly”) to 208 beats / min (“prestissimo”, “very fast”), however, in synthesizers it can be more extensive — for example, 30 – 255 bpm.

The presence of a built-in metronome in the design of the synthesizer.

A metronome is a device that produces sharp sound signals (beats) at certain short intervals specified by the user. In music, such a device is used primarily to maintain a given tempo. A metronome can be useful both for a beginner musician, for developing a sense of rhythm, and for a professional, for example, when learning a new melody, especially if it is to be played without accompaniment and you will need to maintain the rhythm yourself. In addition, the sound of the metronome can also be used as an effect in musical compositions.

Additional items supplied with the synthesizer in addition to the instrument itself.

— Music stand. A stand for musical notations, installed in such a way that the materials on it are constantly in front of the musician's eyes. In modern synthesizers, the music stand can be built-in or removable.

— Pedal. An additional control in the form of a pedal, which can be responsible for a wide variety of functions, depending on the model of the synthesizer. For more information about this, see "Connected pedals", here we note that the presence of a pedal in the kit eliminates the need to look for and select it separately.

— Power Supply. Power supply for connecting the synthesizer to the network. The very possibility of working from the outlet is important for most modern synthesizers. Therefore, the absence of a power supply in the kit means either that it is made internal, or that we have a simple and inexpensive model (usually for children, see "Type"), designed mainly for battery operation and not equipped with a PSU or not providing for it at all connections. An external power supply unit is convenient because it can be disconnected when working from autonomous power sources, saving the tool from unnecessary wires.

— Disk. Optical disk (CD or DVD) with various additional materials on the synthesizer. These can be instructions and other documentation, drivers for connecting to a computer, specialized software for editing music on a PC,...etc.

— Rack. Own stand for installing the synthesizer on the floor — usually folding, in the unfolded state resembling the letter X in shape. With such a stand, the musician does not have to look for a free table, window sill or other similar place to place the instrument — there is enough free space on the floor. Racks for synthesizers are also sold separately, but it is often more convenient or even cheaper to buy such a device along with an instrument.

— Microphone. The microphone can be used both for singing and for creating samples based on external sounds. However it is worth noting that usually relatively inexpensive synthesizers for beginner musicians are equipped with microphones — it is more convenient for a professional to independently choose additional equipment (including a microphone) to suit their own needs and preferences, without relying on the choice of the manufacturer. Accordingly, the complete microphones themselves usually have rather modest characteristics.

Rated power consumed by the tool during operation. Modern synthesizers, even the most powerful and advanced ones like workstations (see "Type"), consume very little energy — up to 100 W, and often noticeably less. Therefore, it is rarely necessary to pay attention to this parameter in fact, mainly in rather specific situations — for example, when working from an autonomous generator, when you need to take into account the entire load connected to such a power supply.