United Kingdom

Amplifiers ART

 prices on 28 models  
ART
clear
Save List
Show
Amplifier ART Tube MP Studio V3
preamplifier, tube, concert, channels: 1, Gain Control, external power supply, 0.68 kg

Amplifier ART Tube MP
preamplifier, tube, concert, channels: 1, Gain Control, external power supply, 0.68 kg

Amplifier ART Tube MP Project Series
preamplifier, tube, concert, channels: 1, Gain Control, external power supply, 1.14 kg

Amplifier ART Tube MP/C
preamplifier, tube, concert, channels: 1, Gain Control, external power supply, 1.32 kg

Amplifier ART TPS II
preamplifier, tube, concert, channels: 2, Gain Control, 2.5 kg

Amplifier ART SDA1
amplifier, concert, channels: 2, per channel 8Ω 140 W, per channel 4Ω 200 W, inputs: Main XLR/Jack, Gain Control, 3.4 kg

Amplifier ART Pro MPA-II
preamplifier, tube, concert, channels: 2, Gain Control, external power supply, 4.5 kg

Amplifier ART ProChannel II
preamplifier, tube, concert, inputs: Main XLR/Jack, Gain Control, 5 kg

Amplifier ART SLA1
amplifier, concert, channels: 2, per channel 8Ω 100 W, per channel 4Ω 130 W, dumping: 100, inputs: Main XLR/Jack, Gain Control, 6 kg

Amplifier ART SLA2
amplifier, concert, channels: 2, per channel 8Ω 200 W, per channel 4Ω 280 W, dumping: 100, inputs: Main Euroblock/RCA/XLR, 9 kg

Amplifier ART SLA4
amplifier, concert, channels: 4, per channel 8Ω 100 W, per channel 4Ω 140 W, dumping: 100, inputs: Main Euroblock/RCA/XLR, 9 kg

Dual-channel phantom power supply for microphones. The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a ru more→gged, compact, and portable unit. Innovative low power circuitry generates the higher voltage necessary for powering microphones while maximizing battery life. Features 2 XLR inputs and 2 XLR outputs, and 7,5 - 12 V AC/DC input. Can be powered with an external power supply or 9 V battery. Dimensions: 48 x 117 x 99 mm. Weight: 0,37 kg.
Made in: China
The ART S8 can be used to split eight balanced low impedance microphone signals into sixteen balanced low impedance microphone signals. Each channel of the S8 provides one direct output and one transf more→ormer isolated output from a single microphone. The S8 includes a ground-lift switch on each isolated output to reduce noise due to ground loops between connected equipment. Frequency response is 20 Hz - 20 kHz. Dimensions: 531 x 178 x 89 mm. Weight: 1,9 kg.
Made in: China
Type: Splitter
UK/EU Power supply included: No
dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and more→groundloop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output …
Passive noise eliminator. This device easily removes noise without any signal degradation. It has balanced and unbalanced 6.35 mm TRS inputs and outputs. Frequency response: 10 Hz - 50 kHz. Dimensions more→: 114 x 73 x 38 mm. Weight: 0.4 kg
Made in: China
Type: Noise Reducer
UK/EU Power supply included: No
90.66Buy!
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Microphone Pre-Amp / Desktop / Number of Channels 2
75.78Buy!
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Signal Splitter / Desktop / Number of Channels 1
85.70Buy!
£
Muziker.co.uk
Delivery: in United Kingdom
Report
Dual channel level converter. The CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and por more→table unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used. Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied. Frequency response: 20 Hz - 20 kHz. Comes with external power supply. Dimensions: 47 x 117 x 109 mm. Weight: 0,5 kg. Made in: China
Dual reamping direct box. The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio o more→r video machines need to be connected to XLR microphone or 6,35 mm instrument level inputs. The unit has two high quality isolation transformers that prevent ground loops when connecting various systems together. Frequency response is 20 Hz - 20 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,40 kg.
Number of Input Ports: 4
Type: Ampbox;DI Box;Splitter
Number of Outputs: 4
Rackmountable: No
Made in: China
UK/EU Power supply included: No
The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high perfor more→mance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.
Rackmountable: No
Made in: China
Type: DI Box
UK/EU Powe
Signal Splitter / Desktop / Number of Channels 1
Professional active direct box that allows connection of an instrument, line or speaker level signals to a mixer or other balanced input. It features highimpedance singleended 1/4” and XLR inputs that more→are buffered and converted by very lownoise active electronics into an isolated balanced lowimpedance signal source. It has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output – therefore it delivers a very clean, neutral sound with a wide variety of signal sources and over long signal runs even in high noise environments. Direct box features Input Attenuator switches that allow for a wide range of sign…
DI Box / Desktop / Number of Channels 1
4 more item(s)
Pages:
1 2
Filters
Price
from£ up to£ 
Brands
Colour
Device type
Features
Element base
Number of channels
Power per channel (4 Ω)
Power per channel (8 Ω)
Signal-to-noise ratio (Main)
Main input
Release year
more
Signal to noise ratio (line input)
Number of stereo RCA inputs
Line input sensitivity
Adjustments
Features
Inputs
Outputs
Control
Mount size
Width
Depth
Height
Clear parameters